X-SENSE SBS50 Base Station User Manual
- June 14, 2024
- X-SENSE
Table of Contents
X-SENSE SBS50 Base Station
The X-Sense home security system provides security monitoring and remote control of your home devices via the X-Sense Home Security app. As the hub of your X-Sense home security system, the base station connects your devices to the X-Sense Home Security app, through which you can control your home security anywhere and anytime.
Product Overview
Package Contents
Technical Specifications
| Model | SBSS0 |
|---|---|
| Power Supply | lnput:100-240 V AC 50/60 Hz; |
Output: 5.0 V – 1.0 A
Operating Temperature| 40-100°F (4.4-37.8°0
Operating Relative Humidity| 0-85% RH (non-condensing)
Alarm Volume| lO0 dB
App| X-Sense Home Security (both Android
and iOS supported)
Wireless Frequency| 2.4 GHz (Incompatible with 5 GHz Wi-Fi
network)
Operating Frequency| US: 91S MHz;
EU: 868.0-868.6 MHz (25mW e.r.p.) 869.2S-869.3 MHz (10mW e.r.p.)
2400-2483.5 MHz (100mW e.r.p.)
869.65-869.7 MHz (25mW e.r.p.)
Wi-Fi Transmission Range| 170ft(50 m)
Wireless Protocol| IEEE 802.11b/g/n
Device Setup
Download the X-Sense Home Security App
To download the X-Sense Home Security app, scan the QR code below or search for “X-Sense Home Security” in the Apple App Store or Google Play Store. Sign up with a valid email address. If you already have an account, make sure the app is updated to the latest version.
Before connecting devices, make sure that:
- You know your Wi-Fi network name and password.
- You are connecting your base station and devices using a 2.4 GHz Wi-Fi network (incompatible with 5-GHz Wi-Fi network).
- Make sure the Bluetooth on your phone is turned on.
Note: When the device is configured via Wi-Fi, make sure your mobile phone and devices are as close to the router as possible, which can speed up device configuration.
Connecting the Base Station to the Network
- Connect the base station to a power source with the power adapter.
- Tap “ ” in the app, select “Base Stations”, select “Base Station (SBSSO)” in the product list, and then you will see the “Scan QR Code” page. Scan the QR code on the bottom of the base station.
- Enter a name for the base station. Select the home you created or create a new home for the base station, then select the room in which it is installed. If you create a new home, you will need to enter a name and select the country or region in which you live.
- Press and hold the Pair button of the base station for 5 seconds until the LED indicator flashes yellow rapidly, indicating that the base station is waiting to connect to the Wi-Fi.
- Tap “Operation Confirmed” and then “Next.” The page will show ‘Searching for Nearby Bluetooth Devices”.
- Enter the correct Wi-Fi and password then tap ‘Next’ to add the device. You will hear “connecting to Wi-Fi”.
- After successfully connecting, you will hear “Wi-Fi connected” and the “Device Added’ page will appear. The LED indicator will stay solid blue and you can find the base station in the device list.
LED Indicator
Troubleshooting
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities are available. Please check with your local
authorities or retailers for recycling advice.
Manufacturer and Service Information
X-Sense Electronics Co., Ltd.
Address: Room 402, Building 4, No. 9, Jinshagang 1st Road, Shixia
Village, Dalang Town, Dongguan City, 523750 Guangdong, P.R. China
x-Sense Electronics Co, Ltd.
Email: support@X-sense.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>