Adventure Shop 300 Classic Air Instruction Manual

Adventure Shop 300 Classic Air

Step A: Frame Setup

• Illustration shows the tent frame laid out flat on the ground with positions marked for poles and clips, indicating that 4 poles are to be used.

Step B: Attaching the Flysheet

• Illustration depicts the flysheet being placed over the frame with attachment points highlighted, suggesting the use of 6 pegs.

Step C: Securing the Tent

• Illustration demonstrates the final secured tent with all pegs in place, recommending the use of 8 pegs for full security.

Airspeed Valve System

1. Unscrew the cap (i).
2. Attach the pump (ii).
3. Inflate to the required pressure (iii).
4. Once inflated, close the valve by screwing the cap back on (i).

Specifications

FAQ

• How many people are required to set up the CLASSIC AIR 300 tent?
• At least 2 people are required to set up the tent.
• What is the Airspeed Valve System?
• It is a system used to inflate the tent poles quickly and efficiently. It involves unscrewing a cap, attaching a pump, inflating to the required pressure, and then closing the valve.
• How many pegs are needed in total for setting up the tent?
• A total of 16 pegs are needed: 8 for securing the tent, 6 for the flysheet, and 2 for the guy lines.

Note: Every effort is made to ensure the accuracy of the information. However, we do have a policy of continuous improvement and therefore reserve the right to change or amend our specifications without notice. BAMG Group Ltd.

Pitching Instructions

• This tent should be erected by at least 2 people.

PREPARING INSTRUCTIONS

PITCHING

Airspeed®

Vango makes every effort to ensure the accuracy of our information. We do however have a policy of continuous improvement and we therefore reserve the right to change or amend colors and specifications without prior notice. CAMG Group Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>