NODSOLEX SN300X Portable Power Station User Manual

User Manual
SN-300X
Portable Power Station

SN300X Portable Power Station

Thanks for your purchase from NODSOLEX.
For the best performance and safety, please read this manual carefully before use.
Please keep this manual for further reference.
A CHARGE FIRST!
Please fully charge your new OASIS 300 Power Station before first use It is highly recommended to charge your OASIS 300 when the state of charge is less than 20%.

Product Overview

1. lCD Display
2. Cigarette lighter Socket Output
3.  DC outpu!(Dc5521)
4. USB-A Output
5. USB-C Output
6. AC Output
7. AC Input
8. PVlnput(xT6o)
9. Light
10. Wireless Charger

Note: No user-serviceable parts ins>de.
It s recommended to fuly charge the OASIS 300 bofore use

OASIS 300 Accessory List

It is recommended to use NODSOLEX lOOW Solar Panel (not included in the pack).

Button Feature and Function

A . Power on/off button
B.  DC output power on/olf button
C. AC output power on/ofl buaon
D.  Long stay mocle on/off button
E.  light button
A . Button A: PowER ON/OFF
Moster swch. Press Button A to tum on the power. press it again far l.5s or lor,ge< to turn it ott.
B. Button B: DC output Power ON/OFF
Please make sure the Power ON/OFF button s activated before pressing Button B.
Press Button B to tum on/off the DC output, the DC ndicator will light on/off
C.  Button C: AC output Power ON/OFF
Please make sure the Power ON/OFF button s activated before pressing Button C, Press Button C to turn on/off the AC output, the AC indicator light on/off, press Button C for l.5s to tum It off, the indicator turns off.
D.  Button O: Long Stay Mode ON/OFF
Please make sure the Nwe. ON/OFF button and AC output button ore activated before pressing Button D;
Pross Button D to tum on lho Long Stay Mode, which moons AC output standby time is oxtondod from 30 mins to 4 hours.
E.   Button E: Light
This function is available r.o matter if the POwer ON/OFF button is activated or not.
How to USO First. press Button E once to turn on long bright mode:
Second. press Button E once again to switch the light made Press it for l.5s. The light wil be off.

LCD Features

A. Input Stotus
B. USB Output Status
C. Over Load Alarm
D. DC output status
E. AC output Status
F. Battery Charge Status
G. Battery Percentage
H. output Power
I. Remainig Output Time
J. Input Power
K. Remaining Input Time

General Specifications

Technical Spcification
Battery

General Specs

Input

Output

How to Charge Solar Panel Charging

1. Do not charge the unit o via solar panel outside of the range of DC12-28V
2. Placo the solar panel in the direct exposure lo lhe sunlight os much as possiblo.
3. Supports NOOSotEX IOOW solar panels: charging the OASIS 300 with the NODSOLEX IOOW solar panel takes around 3 hours to achieve a lull charge. The charging time may vary based on the lighting conditions.

AC Charging
Plcose use the AC Charging Cable that we provided lo charge this unit, and ii will take about 1.5 hours to fully charge the power station. 12V Car Charger Charging
Please use the car charger that we provided to charge this unit. and It wil toke about 3 hours to fully charge the power station Power/Charge Devices With OASIS 300

1. Select the type of outlet required by pressing the Output ON/OFF Button. The output port wil NOT function until the appmpriate button is pressed. When activated. the indicator on the bun on shows white, Indicating that the outputs are active. and the LCD dis ploy will turn on and p,ovide details abou! power nput/output The LCD Screen will automatically shut down after 3minutes when no outputs me activated.
2. Pass-through Charging. The advanced battery management system of OASIS 300 a lows it to power a connected device via all output ports while charging the OASIS 300. Note; If you exceed the overload protection power, the device automatically runs its protection function to avoid danger.
3.  Overload Condition: If on AC overload condition occurs on the output part. OASIS 300 will automatically turn off AC output power. The alert icon on the LCD screen will lluminate.
4. The charging process will be efficient when the input charge cable meets the specification out Uined in tho General Specifications section. Only charge OASIS 300 with tho provided AC charging cable.

What It Powers

Important Safety Instructions

Product Use:

• DO NOT use any inappropriate power cords.
• DO NOT place the unit close to or no tire , expose it to heat. Keep out of direct sunlight.
• DO NOT charge, use, or store the unit in a bathroom or  an oreo exposed to rain or moisture. Use ond store the unit only no clean and dry environment.
• Do NOT drop the unit into the water. If the battery in the unit comes nto contact with water, it may cause chemical decomposition of the battery. which may cause !he battery to catch tire ar explode.
• Never use or charge swole,n, lcoky, or damaged batteries. your battery is abnormal, contact us to get support.
• Never install or remove a battery from the unit when it is turned on DO NOT use the batteries in strong electrostatic or electromagnetic environments. Other wise. the battery control board may malfunction and cause a serious accident.
• Never disassemble or pierce the product in any way. Otherwise it  may leok catch on tire or plode.
• DO NOT use the product if it was involved in a crash or a hcovy bump
• If the product falls into water during use. lake t out mmediately and put it n o safe and open area.
• Keep a safe distance from it until t s completely dry. Never use it again and dispose of ;1 properly as described n the Battery Disposal section below. If the product catches tire. it is recommended 10 use tire extinguishing equipment the following order water or water mist, sand, tire blanket, dry powder, ond carbon dio,ide tire extinguisher.
• DO NOT olow pins, wires, or other metal pieces to be inserted nto the device case, outlets, or controls Metal pieces may short-circuit the unit.
• Avoid collision. DO NOT place heavy objects on the unit.
• If there is dirt on any plug or outlet surface. use a dry cloth to clean it Otherwise. it will cause abrasion and result n energy loss or inability to charge.
• DO NOT pu! the machine in a microwave oven or in a pressuri,ed container.
• Transportation: OASIS 300 complies with all legal requirements for transport of dangerous goods. The capacity ot the lithium battery pock exceeds 1000Wh. Based on international standards. if OASIS 300 is transported by airplane. it must be transported in accordance with IATA standard paclaging. lATA instructions and labeling requirements and the relevant declarations must be completed.

Product Recharging:

• When you tirst plug n o power source a solar panel or a wall charger. the OASIS 300 may take one minute to detect and adjust its charge circuitry before it starts drawing power from the source.
• DO NOT charge the unit via power supply systems outside of the range of ACI00-130V.
• DO NOT charge the unit via solar panels outside of the range of DC12-28V.
• Always use approved attachment charging cables. We take no responsibility for any damage caused by using other brands charging cables
• When charging. please place the product on the ground with   flammable or combustible materials around to. To prevent accidents, never leave the machine unattended during charging.
• DO NOT charge a product immediately after a long heavy load. because the product’s temperature moy be too high. DO NOT charge a product until it cools down to room temperature.
• Only charge the unit within an ambient temperature of 32’F to 1040f (oc to 40″C ). The ideal chargintemperature ronge is 73°F to 82°F(23°C to 27°C)

A Product Storage and Transportation:

• Keep the product out ot the reach of children. If any children accidentaly swalow parts. please go to a doctor immediately.
• It the state of charge of OASIS 300 is low. charge the battery betore store it.
• Store the product n dry environments. DO NOT place the product where it may contact water.
• Moke sure no small metal objects can tall on or around the product w!iile in store.
• Never transport a product with o battery power level higher than 30%
• Battery life may be reduced  not used for a long time is recommended to fully charge and discharge OASIS 300 at least once every three months to maintain the health or the battery pack.
• Never store the product in environments below -20°C( -4°F) or above 45″<: (1130f).

Cleaning

• Be sure that OASIS 300 s disconnected from all input power sources ond output devices. Use a clean. dry. soft. lint-1,ee cloth to clean.
• Remove any debris. dirt or other blockages on both side vents. When cloaning debris from the side vents, do not olow the debris. dirt or other blockages to ente, the body al OASIS 300.
• DO NOT use abrasive cleaners or solvents
• DO NOT use compressed air to clean side cooling vents. as this will force foreign particles into the internal circuitry.
• To ovoid the risk of electrical shock. DO NOT use metal objects to clean ports.

Troubleshooting

OASIS 300 Will Not Charge Or Operate Connected Devices:

• Ensure that the DC/USB/AC output ports are activated. Contirm the connected device is suitable for the OASIS 300
  by reviewing the output specifications provided in the General Specitications section.
  Confirm OASIS 300 is charged by reviewing the eorterv Level Indicator. Verily the watt do!o displayed on the  Screen tor overload conditions
  OASIS 300 Will Not Charge:

• Contirm that the wall plug power cable’s cord is nserted fully into the AC Input. Confirm that the AC wall plug power cable is the cable provided with OASIS 300. If the input does not comply with the requirements lacoted in the General Specitications section. the Low Watt displayed.

• After running out of battery power. OASIS 300 could not be range at not be may be charged shortly. The battery pack needs toget back to a safe temperature to a low the charging action.

  Note:
A photovoltaic panel as input for charging the internal battery shall be provided with an inverter and/or a charge controller in accordance with UL 1741 or UL 62109-1; The external power supply shall be a power source in accordance with the Standard UL 60950-land CAN/CSAC22.2 No. 60950-1, or UL 1310 and No.1, CAN/CSA C22.2 No.223, or No.1, CAN/CSA C222 No.223; A vehicle adapter that complies with the enclosure and input contacts requirements in the Standard for Vehicle Battery Adapters, UL 2089, and Power Supplies, CAN/CSA C22.2 No.107.1. The connector plug shall incorporate a fuse or other protective device having a current rating not greater than 15 A.
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS.

IMPORTANT SAFETY INSTRUCTIONS

1. WARNING-When using this product, basic precautions should always be followed, including the following:
   a) Read all the instructions before using the product.
   b) To reduce the risk of injury, close supervision is necessary when the product is used near children.
   c) Do not put fingers or hands into the product.
   d) Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric shock, or injury to persons.
   e)  To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
   f) Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
   g) Do not operate the power pack with a damaged cord or plug, or a damaged output cable.
   h) Do not disassemble the power pack, take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
   i) To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.

2. WARNING- RISK OF EXPLOSIVE GASES
   a). To reduce the risk of battery explosion, follow these instructions and those published by the battery manufacturer and manufacturer of any equipment you intend to use in the vicinity of the battery. Review cautionary marking on these products and on engines.
   b) PERSONAL PRECAUTIONS

• Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
• Wear complete eye protection and clothing protection. Avoid touching eyes while working near the battery.
• If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters the eye, immediately flood the eye with running cold water for at least 10 minutes and get medical attention immediately.
• NEVER smoke or allow a spark or flame in the vicinity of the battery or engine.
• Be extra cautious to reduce the risk of dropping a metal tool onto the battery. It might spark or short-circuit battery or other electrical parts that may cause an explosion.
     When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
    Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
    Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause an explosion. The temperature of 130°C can be replaced by the temperature of 265°F.
    Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. SAVE THESE INSTRUCTIONS.

Disposal/Recycle
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. See www.epa.gov for additional information.
All products come with a full 2-year limited warranty from the date of purchase (Cables excluded). It will be out of guarantee if damaged due to incorrect use or force manure.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ~Reorient or relocate the receiving antenna. ~Increase the separation between the equipment and receiver. ~-Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TY technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Due to constant technology update, product specifications and configuration changes, please refer to the actual product.

Questions? Comments?
Reach out to us for expert support!
support@lnodsolex.com
 nodsolex.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>