WElnotti YF-WCS18W 3 In 1 Fast Wireless Charger User Manual
- June 3, 2024
- WElnotti
Table of Contents
YF-WCS18W 3 In
1 Fast Wireless Charger
User Manual
YF-WCS18W 3 In 1 Fast Wireless Charger
THIS INSTRUCTION CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP
FOR FUTURE REFERENCE.
3 IN 1 Fast Wireless Charger
Follow WELNOTTI Visit us:www.welnotti.com
Thank you for purchasing this 3 IN 1 wireless Charger.
This product is a three-in-one fast wireless charger that can simultaneously
charge mobile phones / iWatch/ TWS Bluetooth headsets This product is a
convenient and practical smart electronic device.
This product adopts plug-in design, which is convenient to carry. Place the
device in the charging area to charge the device. You can also place your
phone vertically or horizontally without affecting charging, and you can video
chat or watch your favorite movies while charging.
Please kindly read the user manual before using and keep it for future
reference.
Assembly
*If you don’t have an Apple Watch, please skip Getting Started
- Connect adapter plug to power socket
- Place a Qi compatible mobile device on the phone stand
- Place an AirPods wireless charging case on the secondary charging surface
- Put the apple watch on the top bracket
- When the devices are fully charged, you can remove them
Includes
- 3-IN-1 Wireless Charging Station
- Type C Cable(1 m)
- QC 3.0 Adapter
- User Manual
Product structure
Specification
3 IN 1 Fast Wireless Charger Model: VF-WCS18W Input: 5V/3A 9V/2A Output: 5W/7.5W/10W 2.5W(Apple Watch) 5.0W(Airpods2 Airpods pro TWS Earphone) Transmission Distance (Phone): <8mm
Applicable Devices
- Devices with built-in wireless charging receiver (Apple iPhonel 2/iPhonel 2 Pro/iPhonel 2ProMax/ iPhonel 1/iPhonel 1 Pro/lPhonel 1 ProMax/ iPhoneSE2/iPhoneX/iPhone8/iPhone8Plus, Samsung Galaxy 56/S6 edge/S7/57 edge/S8/S8+/ S9/59+/S10, Samsung Galaxy Note5/Note8, Nokial 520, LG G6/G7N3ON40, Nexus 6/7 and more.)
- Devices with reserved wireless charging interface beside its battery(Samsung GalaxyS3/54/55 Note 2/Note 3/Note4)
- Devices with wireless charging receiver in its protection case (iPhone5s/6/6s/6plus, iPhone 7,etc) Note: All devices must be QI standard.
Advice on Use of the 3 IN
- Wireless Charger 1. No Cellphone metal cases allowed for this wireless charger.
- Please contact the customer service if the temperature of the charging phone is over 140°F. Because the heat is created while charging.
- Better remove your cellphone case while charging in order to improve the charging efficiency and cool the device. Under the principle of magnetic induction coil, barriers and distance over 6mm between the phone and the charger will reduce the charging efficiency and increase heat.
- The wireless charger stand will reduce the charging power or cut off the power automatically and work again after the temperature is lower than 140°F. Because the temperature of wireless charger and cellphone goes up with the time of charging.
Safety Information
To prevent injury to yourself and others or damage to your device, read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion.
- Do not store the device in high-temperature environment, including heat caused by intense sunlight or other forms of heat Do not place device in fire or other excessively hot environments .Exposure to fire or temperature above 212°F (100°C) may cause explosion.
- Do not expose the wireless charger to rain or snow.
- Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
- Do not place too close with magnetic stripe or chip card to avoid magnetic failure.
- If this device is accessible to or may be used by a minor, purchasing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold the Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor.
- All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odor, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Manufacturer.
- Do not use your device for a while if the device is overheated.
- Do not store your device near or in heaters, microwaves, hot cooking equipment, or high pressure containers, your device may overheat and cause a fire.
- Do not drop or cause an impact to the charger or the device, store your device only on flat surfaces, if your device falls, it may be damaged.
- Keep your device dry, humidity and liquids may damage the parts or electronic circuits in your device. If your device is wet, dry the device with a towel and take it to a service center.
- To disconnect the charging pad from line voltage, pull the AC adapter from the AC outlet.
- Do not disassemble, modify, or repair your device, your device may malfunction and your risk of electric shock is increased. Any changes or modifications to your device can void your manufacturers warranty.
- Please keep the distance at least 20cm between medical devices and the wireless charger, to avoid potential interference with the device.
- Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger
- The AC outlet shall be installed near the charging pad and shall be easily accessible.
- To comply with FCC RF exposure compliance requirements, the wireless charger must be used with a separation distance of at least 20 cm from all persons.
SAVE THESE INSTRUCTIONS
Legal
This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to part 15 of the FCC Rules, this device must be used with certified
peripherals and shielded cables. All peripherals must be shielded and
grounded. Operation with non-certified peripherals or non-shielded cables may
result in interference to radio or reception.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
www.welnotti.com
Technical Support
E-Mail:support@welnotti.com
Manufacturer: Yingfu (Jiangxi) Intelligent Electronics Co., Ltd
Address:4 #, 5 #16 # plants in EF plot, Chancheng new area, Anyuan County,
Ganzhou City, Jiangxi Province
| EC | REP | UE Fast Refund Gmbh |
|---|
Friedrich -Alfred-Stra Re
184 Duisburg 47226 Deutschland
+49(0)211-97538868
U K AR| WSJ Product LTD(for authorities only)
---|---
Unit 1 Alsop Arcade L3 5TX brownlow
hill, Liverpool, GB +44(0)7825478124
welnotticlub
Made in China
Documents / Resources
|
WElnotti YF-WCS18W 3 In 1 Fast Wireless
Charger
[pdf] User Manual
YF-WCS18W, YFWCS18W, 2A8AT-YF-WCS18W, 2A8ATYFWCS18W, 3 In 1 Fast Wireless
Charger, YF-WCS18W 3 In 1 Fast Wireless Charger, Fast Wireless Charger,
Wireless Charger
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>