Kmart Swag 1p Flat Pack Instruction Manual
- June 7, 2024
- Kmart
Table of Contents
Instruction Manual
Swag 1p Flat Pack
( Keycode:42914877 )
Product Image-
| Parts list-|
No
| Part name| Quantity|
Image
---|---|---|---
1| Swag body| X1|
2| Fiberglass poles A| X1| 
3| Fiberglass poles B| X1| 
4| Foam mattress| X1| 
5| Guy rope| X3| 
6| Pegs| X10|
Please read all instructions carefully and make sure you have all parts before
starting to assemble.
Assembly steps-
Step 1,
Take out the fibreglass poles from bag. Assemble the poles by each section
joined together with ferrule.
Pole A
Pole B
Step 2,
Spread out the swag. Insert the pole A through the pole sleeve on the swag.
Step 3,
Erect the swag with pole arch and insert the pole end with pin into the right
at the bottom of each tent corner. Erect the pole B in rear. Attach the hooks
to each pole.
Step 4,
Secure the pre-attached guy rope and peg down.
Spread out the foam mattress, put into swag on the bottom. The swag is
complete.
Warning –
KEEP ALL FLAME AND HEAT SOURCE AWAY FROM THIS TENT FABRIC.
DO NOT USE CANDLE, MATCHES, OR OPEN FLAME OF ANY KIND IN OR NEAR THE TENT.
DO NOT COOK INSIDE THE TENT.
DO NOT SMOKE IN THE TENT.
DO NOT STORE FLAMMABLE LIQUIDS INSIDE THE TENT.
EXTINGUISH OR TURN OFF ALL LANTERNS BEFORE GOING TO SLEEP.
CHOOSE A LEVEL SITE TO ERECT TENT THAT IS CLEAR FROM OVERHANGING BRANCHES AND
NOT.
IN LOW-LYING AREAS THAT COULD BE SUBJECT TO FLOODING.
Care instruction-
WIPE CLEAN WITH A DAMP CLOTH. DO NOT USE ABRASIVE MATERIALS AND SOLVENTS.
ENSURE TENT IS CLEAN & DRY BEFORE PACKING OR STORING TO PREVENT DAMAGE FROM
MOULD & MILDEW.
Made In China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>