minimum RC F8F-RareBear Pro Instructions
- June 7, 2024
- minimum RC
Table of Contents
F8F-RareBear Pro
Assembly Instructions
1.Assemble the
base. 
2.Fold
hinge for many times to make the rudder surface move freely (also can be cut
off and connected with transparent tape).
3. Cut
off this part. When the fuselage is combined, the screwdriver can be extended
into the adjusting steering arm.
4. Bond the fuselage, pay
attention to the difference between the left and right sides of the fuselage.
6.
Install aileron servo. The steering gear wire extends from the right side of
the fuselage.
7.Insert wing support, pay attention to both sides symmetrical.
8. Insert
horizontal tail, pay attention to the symmetry of left and right sides, glue
bonding
9. Glue the
motor to the nose. The coating sticker can be pasted on the fuselage at this
time.
10. Reference
to coated stickers.
11. Fold the
aileron back and forth many times to make the rudder surface move freely. (It
can also be cut off directly and connected with transparent tape.)
Sticking
transparent tape on both sides to enhance the torsional rigidity of the
aileron
12. Bend the
wing along the notch.
13. Installation of the wing.
14.
Installation of the control horns.
15.
Connect the pushrod clips with heat shrinkable tube and fix them with glue.
16.
Installation of the pushrods.
17.
Installation of the control horns.
18.
Installation of the servos.
19. Connect
the pushrod clips & pushrods with heat shrinkable tube and fix them with glue.
20.
Installation of the pushrods.
21. Attach the receiver to the
fuselage with Velcro.
22. Attach
the battery to the fuselage with Velcro. 
Completion of assembly
First test flight
The center of gravity is 10 mm from the leading edge of the wing. Move the
battery forward and backward to adjust the center of gravity.
The amount of elevator, rudder, and aileron is 5 mm for each side. Please
adjust the rudder surface to the level before the flight test.
Explore the ultimate possibility of airplane kits
MinimumRC.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>