east cast Alby Dresser Instructions
- June 7, 2024
- east cast
Table of Contents
For your new world
Alby Dresser
Assembly and care instructions
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Thank you for purchasing an East Coast product. It’s been carefully designed
and constructed to offer quality, safety, and reliability for you and your
baby.
If you have a query about this product or require replacement parts, please
contact 01692 408802.
Your child’s safety is your responsibility. Keep children clear during
assembly as the fittings pack contains small parts which may present a choking
hazard. Please read the instructions and warnings carefully before use.
Layout the parts on a soft level surface and compare them to the parts
checklist. Don’t throw away any packaging until you’re sure that you have all
the parts.
You will need the following tools to complete assembly:
Flat-headed screwdriver and cross-point screwdriver
Hardware
Wooden Parts
Assembly
Assembly 1
Note: Repeat for another side (R)
Assembly 2
Assembly 3
Assembly 4
Assembly 5
Assembly 6
Assembly 7
Assembly 8
With a cam pin inserted, turn the cam nut clockwise to tighten.
Note: Repeat for another drawer side(R)
Assembly 9
Assembly 10
Note: Repeat assemblies 7 – 10 for other drawers
Assembly 11
Assembly 12
Assembly 13
Assembly 14
The dresser is supplied with a fixing kit that will secure it and help to
guard against accidental tipping.
WARNING: Installation only to be carried out by a competent person.
Check the suitability of the wall before fitting.
- Place the dresser against the wall where it is to be fitted, remove the top drawer and mark the wall through the slot in the back.
- Move the dresser away and using the long screw, washer and the appropriate wall fixing attach the fabric strap to the marked position.
- Replace the dresser and thread the fabric strap through the slot in the Back Panel.
- Attach the fabric strap to the underside of the top using the short screw and washer.
Before use, ensure that the strap is securely fixed to both the wall and the
dresser.
The type of wall fixing you will require depends on the construction of the wall. See below for details. If in doubt, seek professional advice.
Wood: If fixing to wood make sure that it isn’t chipboard as screws can easily
pull away from the core structure.|
---|---
Brick or masonry: Use the wall plug, provided you are sure that your wall is
sound.|
Cavity wall: Special toggle wall plugs needed. Seek expert advice.|
Care and maintenance
All assembly fittings should be tightened properly and should be checked
regularly and re-tightened as necessary. Take care when moving the furniture,
as careless handling may cause damage.
Cleaning is simple; just wipe over with a damp cloth, and avoid using strong
detergents or abrasives.
An occasional light application of wax polish will help maintain the finish.
In use
Warning: Do not leave your child unattended.
Ensure that all fittings are tightened properly. Loose screws could allow a
child to trap part of their body or clothing, posing a strangulation risk.
Be aware of the risks of open fires and other such sources of strong heat,
such as electric bar fires, gas fires, etc. in the near vicinity of the
dresser.
Suitable for use with a flat changing mat up to 76 x 47 cm which does not
compromise the effective height of the changer barriers.
The changing area is suitable for use up to 12 months old or 11kg in weight.
Do not use the dresser if any of the parts are broken, torn, or missing.
Any additional or replacement parts can only be obtained from the manufacturer
or the distributor.
East Coast Nursery Ltd, Robertson House
North Walsham, Norfolk, NR28 0BX, UK
For customer care or inquiries:
Call: +44 (0)1692 408802
Email: nursery@east-coast.co.uk
eastcoastnursery.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>