Pilaster Designs 678-60H Queen Headboard Footboard Side Rails Instruction Manual
- June 4, 2024
- Pilaster Designs
Table of Contents
Pilaster Designs 678-60H Queen Headboard Footboard Side Rails
Caution :
Please read instructions thoroughly before unpacking assembly parts. Sharp,
exposed staple tips can cause injury, therefore, for your protection, please
remove any exposed staples used in packing.
- We recommend that you assemble this product with the assistance of another person; this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.
- Please do not over tighten screws or bolts.
STEP 1
Partially insert the JCBB Bolt (A) and Washer (B), (C)into the Headboard (1).
Affix the Side Rail (3) to the Bolt (A) as shown and fully tighten with the
Allen Key (D).
Repeat with the Footboard (2).
STEP 2
Tighten the JCBC Bolt (E) and Washer (F) into the Slat Support (5) using Allen Key (G). Adjust the bottom leveler as needed.
STEP 3
Attach the Slat (4) to the Side Rail (3) with a Screw (H) using a Phillips screwdriver (not provided).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>