ZEBON CR1018i Alarm Clock with USB Charger User Guide

ZEBON CR1018i Alarm Clock with USB Charger User Guide

LOCATION OF CONTROLS

1. Dimmer Button
2. Hour Button
3. Minute Button
4. Time Button
5. Snooze Button
6. Alarm 1 Button
7. Alarm 2 Button
8. Volume Button
9. Alarm OFF Button
10. Red Indicator Light
11. AM Indicator
12. PM Indicator
13. DST Indicator
14. Ring Indicator
15. Vibrator Indicator
16. Alarm 1 Indicator
17. Alarm 2 Indicator
18. Speaker
19. DC Input Port
20. USB Output Port
21. Back Up Battery
22. BUZZ/VIB Switch
23. Vibrator Jack

POWER RESOURCES

1. Pull out of the insulator at battery compartment to activate
   CR2032 coin cell backup battery.
   NOTE: Backup battery(included) doesn’t support time display but can back up time & alarm setting.

2. Connect the adapter line to DC jack , then plug into a 100~240V
   AC wall power outlet.
   

TIME SETTING

1. Press button once, display  starts flashing.

2. Press button to set the hour.
   press button to set the minute

3. Press button or button to save time or wait for another 10 seconds to confirm automatically.

To change 12H/24H time format

Hold press button to change 12H/24H time format

ALARM SETTING

1. Press button, the alarm indicator will light up, the display starts flickering.
2. Press button to set the hour, press button to set the minute.
3. Press button or button to save alarm time or just wait for another 10 seconds to confirm automatically.

Setting ALARM 2 is the same as ALARM 1

Set Alarm Ring Volume

Repeat button to adjust the alarm ring volume for your preference.

There is 7 levels, The sequence is as follows:

• 03-04-05-06-07-06-05-04-03-02-01-02……..

Turn off Alarm

When alarm goes off:

1. Press button to temporarily turn off alarm for 9 minutes. Alarm will ring every next 9 minutes.
2. Press button to turn off alarm for 24 hours.

The alarm indicator or is still on, which means alarm is still activated and will ring after 24 hours.

Cancel Alarm

1. Hold press button to turn off alarm1 and alarm 2 permanently. And corresponding indicator and will turn off.
2. Hold press button, just turn off alarm 1 permanently.  indicator will turn off.
3. Hold press button, just turn off alarm 2 permanently. indicator will turn off.
4. If alarm 1 goes off, then hold press or , just turn off alarm1 permanently. indicator will turn off .
5. If alarm 2 goes off, then hold press or , just turn off alarm 2 permanently. indicator will turn off.

DST

• Hold press button to switch DST function. DST indicator will turn on.
• Hold press button again to turn off DST function. DST indicator will turn off.

USB CHARGING

• Plug charging cable into device such as phone or tablet.
• Device can charge both your phone or tablet at the same time.
• The maximum charge current is 1 Ampere.

DIMMER

Repeat button to adjust the brightness of display for your preference.

There is 8 levels, The sequence is as follows:

• 04(default)-05-06-07-06-05-04-03-02-01-OFF-01-02……..

When the OFF level is selected, the display will be completely turned off and the Red Indicator light will turn on. Then if any button is pressed again, the display screen will be restored to 04 default level instead of complete off state, and the Red indicator light will also be turned off.

NOTE: Hold press the DIMMER button, the display will be completely turned off directly.

RED INDICATOR LIGHT

1. When the alarm goes off，the Red Indicator Light will flash
2. When the brightness of dispaly is set to OFF, the Red Indicator Light will stay on

Vibrator

Insert the vibrator plug into the vibrator jack of the machine.

• BUZZ: Speaker will ring
• BUZZ/VIB: Speaker will ring Vibrator will vibrate
• VIB: Vibrator will vibrate

1. Wake up only by bed shaker
   set alarm on — toggle switch to VIB — indicator will light up.

2. Wake up only by buzzer sound
   Set alarm on — toggle switch to BUZZ — indicator will light up

3. Wake up by both Vibrator and Buzzer sound
   set alarm on — toggle switch to BUZZ/VIB — and indicator will light up.

If you do not insert the vibrator plug into the vibrator jack of the machine, no matter you slide the switch button to VIB or BUZZ/VIB, the clock will have the buzz sound when alarm goes off.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>