SHOGUN MOTORSPORTS 750-6449 Yamaha MT-09 Frame Slider Instruction Manual
- October 27, 2023
- SHOGUN MOTORSPORTS
Table of Contents
MOTORSPORTS 750-6449
Yamaha MT-09 Frame Slider
Instruction Manual
750-6449 Yamaha MT-09 Frame Slider
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures
during the install of this product. Do not try to install this product without
proper tools, recently calibrated torque wrench, correct torque specifications
from factory service manual, safety goggles and gloves.The motorcycle must be
in a fixed secure position before the install process begins. DO NOT remove
both engine studs at the same time. Shogun is not responsible for any part of
your motorcycle for any reason.If in doubt at any point please call us before
the install process has begun.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
| QTY | Price each | Part Numbers | Descriptions |
|---|---|---|---|
| 1 | $35.00 | 99-FS-715-6449-L | PA2 Left Side Puck |
| 1 | $50.00 | 99-FS-710-6449-L | Carbon Left Side Puck |
| 1 | $30.00 | 99-FS-750-6449-L | Black Left Side Puck |
| 1 | $30.00 | 99-FS-750-6440-L | White Left Side Puck |
| 1 | $3.50 | 99-HB-SH10125090 | Socket Cap 10 X 1.25 X 90 Main Engine Stud |
| 1 | $0.50 | 99-HW-M10WASH | 10M Washer |
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
| 1 | $35.00 | 99-FS-715-6449-R | PA2 Right Side Puck |
|---|---|---|---|
| 1 | $50.00 | 99-FS-710-6449-R | Carbon Rickt Side Puck |
| 1 | $25.00 | 99-FS-750-6449-R | Black Right Side Puck |
| 1 | $25.00 | 99-FS-750-6440-R | White Right Side Puck |
| 1 | $3.50 | 99-HB-SH10125080 | Socket Cap 10 X 1.25 X 80 Main Engine Stud |
| 1 | $0.50 | 99-HW-M10WASH | 10M Washer |
Frame Sliders: Left frame slider is longer than right. Left side bolt is
longer than right.
Installation Steps:
- emove left side bolt. Mount left side puck with (99-HB-SH10125090) Socket Cap 10 X 1.25 X 90 Main Engine Stud with M10 washer and torque down to OEM specs.
- Remove right side bolt. Mount right side puck with (99-HB-SH1012580) Socket Cap 10 X 1.25 X 80 Main Engine Stud with M10 washer and torque down to OEM specs.
NOTE : You Must Retain Conical Engine Spacer Upon Re-assembly.
READ CAREFULLY
Shogun cannot guarantee that they will protect your motorcycle from any extent
of damage.
Shogun frame sliders are really meant to help possibly save the frame from
damage in the event of a crash. Because Shogun frame slider products have been
successful in saving cases, bodywork, levers and so on in the past, customers
just assume sometimes you can put the product on and no damage will happen.
The fact is, some crashes result in little or no damage to the motorcycle and
some bikes are destroyed. It’s kind of like a bumper on a car sometimes it
works sometimes it doesn’t, it really depends on all the different forces
applied during the incident. We’ve seen bikes crash at 100 mph with little
damage and some at 15 mph with major damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>