ONE OFA SONY Universal Replacement Remote URC 4812 User Manual

: June 6, 2024
: ONE

Table of Contents

ONE OFA SONY Universal Replacement Remote URC 4812
WARRANTY / GUARANTEE
BATTERIES
Overview
SET UP YOUR TELEVISION
IF STEP 1 DOES NOT WORK AS EXPECTED
LEARNING
SOUND BAR / AUDIO RECEIVER VOLUME CONTROL
Read User Manual Online (PDF format)
Download This Manual (PDF format)

One for all

ONE OFA SONY Universal Replacement Remote URC 4812

Customer Support:
Service client:
www.oneforall-canada.ca
OFA warranty / terms & conditions:
Garantie OFA / termes et conditions:
www.oneforall-canada.ca

WARRANTY / GUARANTEE

WARRANTY / GUARANTEE INFORMATION
Terms and Conditions for “100% Guaranteed To Work” policy, and the separate 1 Year Limited Warranty against defects in material and workmanship can be found at www.oneforall.com/remoteguarantee, or you may request hard copies via mail to UEI Technical Support Service, Suite 301, 26250 Euclid Ave., Euclid, OH 44132. Please include your full name, product information, and contact information in your request communication.
www.oneforall.com

BATTERIES

Batteries

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use quality Alkaline batteries.

Overview

INPUT
Input Select
POWER
Power
0-9
Digits for Channel Entry
EXIT
Menu Exit
TEXT
Teletext on and off
APP 1
YouTube / App Shortcut Key
APP 2
Netflix / App
Shortcut Key
APP 3
Google Play / App
Shortcut Key
I
Info
LIST
Title List
SLEEP
Sleep Timer
GUIDE
Guide
UP, DOWN, LEFT, RIGHT, OK
Navigate the Menu
BACK
Back one level in the Menu
OPTIONS
Options, Menu
HOME
Home
RED, GREEN, YELLOW, BLUE
Fastext
VOL + / –
Volume Up and Down
LAST
Last Channel
PROG + / –
Channel Up and Down
MUTE
Mute
AUDIO
Audio / Language
SUB
Subtitles
HELP
Help
REW, PLAY, FF, PAUSE, REC, STOP
Playback control
FORMAT
Screen Format
DIGI/ANALOG
Digital / Analog
SYNC
Sync, Bravia Sync

SET UP YOUR TELEVISION

THE MAJORITY OF NEWER SONY TV’S SHOULD WORK DIRECTLY.
After putting batteries in, just test some of the keys, and if they work, your remote is ready. If not, follow the next steps:

Make sure your TV is on (not on standby).
Hold down Red + Blue until the LED behind the Power Key blinks twice.
Point towards the TV and hold down the Power key until the TV turns off
The remote will send a different Power signal every 3 seconds. As soon as the TV turns off, let go of the Power key.
The light will blink twice. Now test the rest of the keys on the remote, if they work as your original did, your remote is ready to use. If you find some keys do not work as expected (or at all), proceed to the next step.
– If you find some keys still do not work as expected (or at all), proceed to the next step.

IF STEP 1 DOES NOT WORK AS EXPECTED

ARE SOME KEYS NOT WORKING AS EXPECTED?
If you find some keys do not work as expected (or at all), proceed to the next step.

Make sure your TV is on (not on standby).
Hold down RED + BLUE until the LED behind the Power Key blinks twice
Point towards the TV and hold one of the keys that is not working correctly (for example HOME).
The remote will send a signal every 3 seconds.
When the correct function is shown on the screen (in this case the HOME), let go of the key.
The LED will blink twice – your remote is ready to use.

LEARNING

LEARN A NEW FUNCTION TO YOUR REMOTE
Your One For All remote can learn any function from your original (working) remote. Learning

Place the original remote facing the One For All remote on a flat surface.
To learn: Hold down GREEN + YELLOW until the LEDblinks twice.
Press 975. The LED will blink twice.
Press the key on the One For All remote you want to learn on, for Example: the VOL + key. The LED will blink rapidly.
Press the key on the original remote you want to learn, for
Example: the VOL + key of your Audio Device
Two blinks: ok. Repeat from step 4 for any more keys to learn.
Long blink: try again from step 4.
When you have learned all the keys you need, press and hold the OK key for 3 seconds. The LED will blink twice.

HOW TO DELETE A LEARNED FUNCTION

Hold down GREEN + YELLOW until the LED blinks twice.
Press 976.
Press the key to reset twice.
The LED fl ashes twice and the key will revert to the original function.

SOUND BAR / AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a Sound Bar or Audio Receiver, it’s possible to set up your One For All remote to control the Volume and Mute of this device.
There are two ways to do this:
AUDIO SIMPLESET
If you have a Sound Bar or Audio Device from one of the brands listed in the table below, you can use the SimpleSet method to program your remote to control it. If you do not have one of the below brands, please proceed to the next section.

D igit	Br and
1	Bose
2	Denon
3	Samsung / Harman/Kardon / JBL
4	LG / JVC
5	Marantz / Philips
6	Onkyo
7	Panasonic / Technics
8	Pioneer
9	Sony
10	Yamaha

Note that each of the brands has a digit associated with it, for example 4 for LG (and JVC).

To set up your remote to control your Sound Bar / Audio Device, fi rst make sure your TV and Sound Bar / Audio Device are both powered on, and that there is something playing that you can hear (this procedure will test the Mute function).
Next:

Hold down the VOLUME UP and VOLUME DOWN buttons together until the LED under the POWER key blinks twice.
Now point the remote towards your Sound Bar / Audio Devices and hold down the digit key for your brand (for example 4 for LG). The remote will send the Mute function to your device every 3 seconds.
As soon as your Sound Bar / Audio Device mutes the volume, release the digit key. The LED under the Power key will blink twice, and the Volume Up, Down and Mute keys should now control your Sound Bar / Audio Device.

AUDIO CODE SETUP
If your Sound Bar / Audio Device is not one of the brands listed above, you can also set up the remote to control it by entering a 4 digit code. The codes are listed in the Audio Codelist section of this manual, and are listed by brand and then popularity. Locate the brand of your Sound Bar / Audio Device in this code list and then the procedure is:

Hold down the VOLUME UP and VOLUME DOWN keys until the LED under the Power key blinks twice.
Enter the first 4 digit code for your Sound Bar / Audio Device.
The LED should blink twice on the last digit.
Now try the Volume Up, Down and Mute and see if they control your Sound Bar or Audio Device.
If they work, your remote is set up. If not try again from step 1 using the next code in the list.

POWER MACRO
If you have set up your Sound Bar or Audio Device using SimpleSet or Code Setup, you can now turn your TV and Audio Device both on and off using a single key. Simply hold down the Power key for 3 seconds and the remote will send the Power function to both the TV and the Audio Device / Sound Bar. If you press and release the key, it will only control the TV.

APP SHORTCUT KEYS

The One For All remote features three App Shortcut Keys which can be used to open apps on your TV. If your original remote control has a YouTube, Netflix, or Google Play key, these keys will perform the same function.

However if you try these keys and they do not work, but your TV still has the ability to watch a streaming service, you can use this key as a shortcut by programming a macro (a series of button presses) on it. You could also program
the keys to access other apps on your TV.

To program the macro, you first need to know the sequence keys you use to access the service. For example, some TVs will start Netflix by pressing the Home key, then Menu Right twice, and finally the Enter key.
Once you have determined the sequence for the app you want on your TV, follow these steps:

Sit in front of your device with It switched on (not on standby)
Hold down the App Shortcut key until the LED blinks twice.
Now perform the sequence of keys exactly as would normally. The remote will operate your TV and the macro is recorded in real time – so if it normally takes a few seconds for your device to react don’t worry.
Once you have finished the sequence – and the Streaming Service has started on your device – hold down the App Shortcut key until the LED blinks twice and goes out. The macro is now stored.

Tips

Make sure the OFA remote Is operating the TV before programming
If you find the Macro doesn’t work as expected, you can just repeat the same sequence to reprogram
When programming, wait for your TV to respond first, the remote will remember the timing

RESET
If you would like to reset your remote back to its default settings, please do the following: