elfe FW651A Remote Training Dog Collar User Manual
- June 6, 2024
- elfe
Table of Contents
elfe FW651A Remote Training Dog Collar
Important Safety Information
The FW651A dog training collar is designed to let dogs live safely, happily and get along with people more harmoniously.
WARNING Do not use with aggressive dogs
Aggressive dogs can cause severe injury and even death to their owner and
others. If you are unsure whether this product is appropriate for your dog,
please consult your veterinarian or certified trainer.
CAUTION Safety during on-leash training
It is vitally important that you and your dog remain safe while learning
during on-leash training. Your dog should be on a strong leash, long enough
for him to attempt to chase an object, but short enough for him not to reach a
road or other unsafe area. You must also be physically strong enough to
restrain your dog when he tries to chase.
CAUTION Risk of skin damage
Please read and follow the instructions in this manual. Proper fit of the
collar is important. A collar worn for too long or made too tight on the pet’s
neck may cause skin damage ranging from redness to pressure ulcers. This
condition is commonly known as bed sores.
- Avoid leaving the collar on the dog for more than 12 hours per day.
- When possible reposition the collar on the pet’s neck every 1 to 2 hours.
- Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts.
- If a rash or sore is found, discontinue use of the collar until the skin has healed.
- If the condition persists beyond 48 hours, see your veterinarian.
- This product is not a toy, please keep away from children.
- This product is only for use with healthy dogs.
Overview
Remote
A. Mode indication
B. Battery Display
C. Vibration Level +
D. Vibration Level –
E. On/Off Button
F. Channel Display
G. Channel Conversion Switch
H. Vibration Level Display
I. Tone Button
J. Vibration + Tone Button
K. Vibration Button
L. Charging Port
Receiver Collar
Q. Charging Port (with cover)
R. On/Off Button
S. LED Indicator
Setting Up the Product
Before you can use the Dog Training Collar, you must set up the product using the steps below:
- Charge the Remote and the Receiver Collar.
- Prepare the Remote and turn it on.
- Prepare the Receiver Collar and turn it on.
- Test button functions before putting it on dog.
- Test Vibration function.
- Pair the Remote and the Receiver Collar, pair them when the product loses its code or pairs with a second collar.
Charging the Remote and the Receiver Collar
-
Plug in and fully charge the Remote and the Receiver collar.
For the initial charge,be sure to charge it for 4 hours.
Subsequent charges only take 2-3 hours. -
When fully charged, the red LED on the Receiver Collar will become green. The Battery Display of the Remote will stop cycling and become steady.
Tips:
- Excessive charging will shorten battery life. Only charge them when batteries are low.
- When you’re not using the collar, please turn it off to increase the battery life.
Note:
Please use the Output : DC 5V 500-800mA charger to charge the product. Don’t
use a charger that does not meet the specifications to charge the product.
Prepare the Remote
Turn ON/OFF the Remote
- Press and hold the ON/OFF button to turn the remote ON.
- LCD will be lighted, and shows the information of current channel, battery power and levels. If not, please charge the remote.
- Press and hold the ON/OFF button to turn the remote OFF.
Turn on the Receiver Collar
- Press the On/Off Button until the Green LED light comes on.
- In normal mode, the Green LED will flash every 4 seconds, indicating the Receiver Collar is on and ready to receive a signal from the Remote.
Turn off the Receiver Collar
- Press and hold the On/Off Button until the Red LED light shuts off (This takes approximately 3 seconds).
- Release the On/Off Button.
NOTE:
To extend the life of the batteries, please turn the Receiver Collar off when
it is not in use.
Function Test
We recommend you experience firsthand how the different levels feel on
yourself. Please always starts at the lowest level and work your way up to
your personal comfortable levels.
-
Place the collar receiver on your hand or your leg.
-
Hold your remote approximately 60cm (2 ft). from the training collar. Press the Vibration Button continuously for 1 to 2 seconds.
You should feel continuous vibration. -
Starting at level 1,press the Vibration Button.
-
Increase the level until the sensation begins to feel uncomfortable.
NOTE: Continuous stimulation will transmit for no more than 10 seconds. To reactivate, release and press the button again.
Note:
- The Vibration Level can be adjusted from level 1 to 8, please adjust it properly as per your dog’s reaction.
- It is not recommended to press and hold the Vibration+Tone Button too long to avoid physical or psychological hurt to the dog.
Pair the Remote and the Receiver Collar
- Use the switch on the Remote to select Dog 1 .
- With the Remote turned on and the Receiver Collar turned off, press and hold the ON/OFF Button on the Receiver Collar for 4-5 seconds.
- The Red & Green LED will blink for about 10 seconds indicating that it is ready for pairing.
- Press and hold the Tone Button and the tone+Vibration Button at the same time for 2-3 seconds, the Green Led on the Receiver Collar will blink for 5 times indicating successful pairing.
Collar Fitting
Please fit the collar properly so that the collar presses firmly against the
dog’s skin. When properly fitted, you can be able to put a finger in between
the Receiver Collar and dog’s neck.
Too loose: the Receiver Collar will move around the dog’s neck, the
vibration mode may not be able to work effectively.
Too tight: it may cause dog’s to breathe hard.
Caution:
- Do not shave the pet’s neck as thi may increase the risk of skin irritation.
- The collar should not be worn for more than12 hours per day. Or it may cause skin irritation.
Find the Best Vibration Level for Your Pet
The unit comes with Up and Down buttons to control the Vibration Level, with
Level 1 being the lowest level and Level 8 being the highest. The level of
Vibration best suited for your dog depends on your dog’s temperament and
threshold for Vibration. Always start at the lowest level and work your way
up. The appropriate level can be found when the dog responds to the Vibration
with a mild reaction, such as a flick of the ear, a lick of the lips, a
tensing of the neck muscles etc. The Vibration Level may vary depending on the
training situation. When highly distracted, dogs will require a higher level
of Vibration.
Product Information
Product Specification
The unit needs to be charged under any of situations below
- The indicator light on the Receiver Collar is emitting a red color every 4 seconds or flashes rapidly.
- The 3 bar indicator on the Remote LCD shows just 1 bar.
- The indicator light on the Remote or Receiver Collar will not come on.
- The indicator light on the Remote or Receiver Collar comes on momentarily when any of the Mode Buttons is pressed.
Others
Frequently Asked Questions
Is the Vibration safe for my pet?
While the Vibration is unpleasant, it is harmless to your pet. Electronic
training devices require interaction and training from the owner to achieve
desired results.
How old does my pet have to be before using the Remote Training Collar?
Your pet should be able to recognize basic obedience commands such as “Sit”
or “Stay”. Pets should be at least 6 months old before using the Training
Collar.
Once my pet is trained and has been obeying my commands, will he have to
continue to wear the Receiver Collar?
Probably not. You may need to reinforce training with the Receiver Collar
from time to time.
Is the Receiver Collar waterproof?
Yes
Will I get exactly 300m (984 feet) of range with the Remote Training
Collar?
The range of the Remote Training will vary according to terrain, weather,
vegetation, as well as transmission from other radio devices. Refer to “To
maximize the distance” for tips on maximizing your range.
How long can I continuously deliver Vibration to my pet?
The maximum amount of time you can press the Vibration Button and deliver
Vibration to your pet continuously is 10 seconds. After this, there’s a time-
out and Vibration cannot be delivered for 5 seconds. After the 5 second time-
out period, Button can be pressed and Vibration can be delivered again.
Troubleshooting Guide
My pet does not respond when I press a button.
- Make sure the Receiver Collar has been turned on.
- If your range has reduced from the first time you used the Remote Training Collar, the battery(s) may be low in either the Remote or Receiver Collar.
- Terrain, weather, vegetation, transmission from other radio devices and many other factors can impact the amount of range you have with the unit.
- Test the Receiver Collar. Refer to “How to use the Test Lamp” for details.
- Increase the vibration Level. Refer to “Find the Best vibration Level for Your Pet” for more information.
The Receiver Collar will not turn on.
Make sure the Receiver Collar is placed sungly against your pet’s skin.
The Receiver Collar is not responding to the Remote.
Make sure the Receiver Collar is on.
If the Indicator Light does not come on when any button is pressed on the
remote, ensure that the batteries are charged properly.
If the first two solutions did not resolve your problem. Refer to “Pair the
Remote and the Receiver Collar”.
Warranty
1 Year Warranty
The original purchaser for this unit is provided with 1-YEAR
WARRANTY. The warranty begins from the date of purchase.
A proof of purchase is required for all products under warranty.
We strongly recommend keeping the original receipt. If a proof of purchase is
not available, we will use the serial number (date of manufacture) instead.
If you have any issues or problems with our product, please contact
our consumer service by calling
1-800-667-4111 or by email at
service@eibrands.com.
Not Covered Under Warranty
We DO NOT offer warranty for products that have been bought second-hand or as
a resold product.
We DO NOT cover the product due to misuse by the owner or dog, improper maintenance, and/or lost units. Any water damage on the Water proof remote control or collar will not be covered. All replacement costs for either the remote or receiver will be the owner’s responsibility. The warranty is void if the unit has been altered or an unauthorized person has damaged the unit while attempting repair work.
Compliance
CANADA
This device complies with the Interference-Causing Equipment Standard
ICES-003 as a Class B.
Operation is subjected to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Modfication or changes to this equipment not expressly approved by manufacture may void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>