mea wow MHOC702 Bluetooth Hygrothermograph User Manual
- June 6, 2024
- mea wow
Table of Contents
Operation Manual of Bluetooth Hygrothermograph
LCD version
Please read this User Manual carefully before using the product, and keep it properly.
Product descriptions
Accessories
Installation
The product could be installed in various ways:
-
Using the product together with bracket: Align the bracket with the wall mounting hole on the back of the product and press the bracket into the mounting hole.
Push it upward. After the bracket is securely connected, put the product onto a table, bookshelf, or another appropriate flat surface. -
Mounting the product onto walls: Paste the double-sided adhesive tape onto the surface of the wall mounting structure, remove the release paper and attach the other side to the wall surface.
LCD Indicators
Comfort level indicator descriptions
| Temperature | Temperature <19°C | 19°C<Temperature527°C | Temperature >27°C |
|---|
Humidity
Humidity<20%| | |
20%<Humidity585%| | |
Humidity>85%| | |
Low battery reminder
When this icon appears on the screen, it indicates that the battery is low and must be replaced.
Buttons and functions
View Max./Min.
- Press the “+” or “2 buttons while in normal display mode. The LCD will then show the corresponding maximum or minimum temperature and humidity over the past 24 hours.
Reminder: If no operation is performed within five seconds, the product will automatically quit View mode and enter normal display mode.
Set time and temperature units
- Press and hold the Set button ” “, the number indicating the hour will start flashing and the product will enter setting
- While in setting mode, corresponding numbers will flash. Press the “+” or “2 buttons to change the settings.
- After the setting are completed, press the Set button ” 0″ to turn to the next setting.
Reminder: If no operation is performed within five seconds, the product will automatically quit View mode and enter normal display mode.
Connect to “Meadow”
Connect to Meawow App
This product is connected to Meawow App and can be interconnected with other products on the App.
Search for Meadow in the App Store or scan the QR code to download and install the Meawow App.
https://a.smart321.com/miaomiaocemmcmeawow
Add devices
- Open Meadow App, click the “Add Sub-device” button on the “+” page at the upper right corner or “Smart Gateway” page.
- Select “Temperature and Humidity Sensor” on the page of “Select Device Type”.
- Short press the setting button ” ” 3 times on the back of the hygrothermograph, and confirm the left icon “ ” on the screen of temperature and humidity meter is flashing, which means the device starts the network distribution model.
- After the device is successfully added, it can be found in the “My Home” list.
Smart Linkage
After the device is successfully added, click the “Smart Linkage” module on the main interface of the App device to set the smart and linkage functions, such as:
-
Set the temperature and humidity comfort zone. When the ambient conditions are out of the comfort zone, the phone will send notices and reminders.
-
Set it as “Turn on the air conditioner when the ambient temperature is higher than 32°C”.
-
Some smart linkage functions need to be used with other devices. For more information, please consult the official customer service.
Tips: Due to the upgrade and update of App, the actual operation may be slightly different from the above description. Please follow the guidance in the current App.
Maintenance
Battery replacement
Open the battery cover along the direction marked in the figure.
While keeping the positive electrodes of the two CR2032 button batteries facing upward, install them into the battery compartment by aligning them with the buckle and then close the battery cover.
Reminder: All illustrations in the operation manual to present the product, accessories, user interfaces, etc. are schematic for reference only. Since our products are constantly updated and upgraded, actual products may slightly differ from the schematic illustrations. Actual products shall govern accordingly.
Cleaning
- Please avoid any water from seeping into the product while cleaning it.
- Use a piece of soft cloth soaked with neutral detergent to wipe away the dirt on the product surface.
Notices
- Do not immerse the vent holes of the product in water.
- Do not forcibly remove the product after it has been attached to the wall to avoid damaging the product or wall surface.
- This product is not to be used in environments below 0 C. Please keep away from environments with high temperatures, high humidity, and other severe conditions.
- The battery that comes packaged with this product is for trial use only and is not guaranteed to have the same lifespan as a standard new battery.
- This product is meant to be used as an everyday instrument, not as a measuring tool.
Technical parameters
Product name: Bluetooth Hygrothermograph(LCD version)
Model: MHO-C702
FCC ID: 2AWMOMHOC702
Battery: CR2032 button cell (two installed)
Rated voltage: DC3.0V
Material: ABS
Product dimensions: 88.70.12mm
Product weight: 59g (including batteries)
Temperature measuring range: 0°C-60°C
Temperature display resolution: 0.1°C
Humidity measuring range: 0%-99%RH
Humidity display resolution: 1%RH
Manufacturer: Measmart Technology INC
Address:17800 CASTLETON ST STE 665, CITY OF INDUSTRY, California, 91748, United States
For any after-sales service, please email Meawow via service@meawow.com or visit our official website: www.meawow.com.
For more information, please follow the Facebook page of Meadow.
We, Measmart Technology Inc hereby declare that this equipment is in full compliance with the applicable US and European’s Directives, European Norms, and its amendments.
FCC Caution.
- § 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- § 115.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- § 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/tv technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Operation manual version: V1.0
Documents / Resources
| mea
wow MHOC702 Bluetooth
Hygrothermograph
[pdf] User Manual
MHOC702, 2AWMOMHOC702, MHOC702, Bluetooth Hygrothermograph
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>