ZUMBA LOUD ZL-X15BT 15-Inch Powered Loudspeaker User Manual

ZUMBA LOUD ZL-X15BT 15-Inch Powered Loudspeaker User Manual

SYSTEN FEATURES

Self Powered 15″ / 2-way Loudspeaker with USB /BT / Mic-Line Inputs and Wheels

Features include: 15″ woofer and a 1.75“ compression driver with a 250W continuous (RMS) high-quality Class-AB Bi-amplifier. Time aligned electronic crossover with 2nd order filter at 1 KHz and subsonic 2nd order filter at 35Hz. Handles support an easy grip for better handling. Tripod / Pole mount capable, allows for an array of configurations. Includes Power and Clip LED indicators, XLR and TSR combo inputs and XLR line output. The Equalizer provides 120 Hz +/- 6dB Bass and 1200HZ +/- 6dB Middle and 10KHZ +/- 6dB Treble.

• 15” woofer (PRO-Z15) for low-end punch in a compact enclosure and 1.75” high-frequency titanium compression driver (PRO-DR1.75).
• Durable composite construction with innovative hi/Io grip design for easy tripod stand mounting.
• 40Hz-20KHz frequency range.
• 250W continuous (RMS) ,1000W Peak power handling.
• 98dB SPL sensitivity, 130 dB Max SPL.
• Class-AB Bi-amplifier.
• MP3 player with LCD display, USB, BLUETOOTH and TWS technology.
• Aluminum back plate.
• 5 ”M8 Rigging points.
• Heavy-duty steel grill.
• XLR mix output.
• XLR/TRS combo input with MIC/LINE selector.
• USB player with folder search function.

QUICK SETUP

The ZL-X15BT include a fully integrated audio system with carefully matched electronics and transducers. These products make it easy to setup a high quality sound system quickly with a minimum amount of cables and external electronic.

To setup a full-range powered loudspeaker.

Connect the supplied AC power cord on the rear of the speaker to an available power outlet.|
Insert your USB flash to the USB connector.|
Turn the MP3 LEVEL and MASTER knobs to the MIN position.|
Turn on the POWER switch.|
Press PLAY button.|
Adjust the MP3 LEVEL and MASTER knob to the desired volume.|

TRÍPOD AND FLOOR NONÍTOR OPERATION

Mounting a Loudspeaker on a Tripod Stand

CAUTION! Two person lift and placement is recommended for the heavier loudspeakers. Single person lift and placement of heavier loudspeakers may result in injury.

To mount a loudspeaker on a tripod stand

• Place the tripod stand on a level stable surface.
• Fully extend the legs of the tripod stand.
• Do not compromise the tripod stands structural integrity by trying to make the stand taller.
• Do not attempt to suspend more than one loudspeaker on a stand designed for a single loud speaker.
• Using two hands lift the loudspeaker.
• Insert the tripod through the hole on the bottom of the loudspeaker.

FLOOR NONÍTOR

To setup a loudspeaker as a floor monitor:

• Place the loudspeaker on a level stable surface.
• Safely route cables to prevent injury to performers, production crew, and audience members.

ZL-X15BT AMPLIFIER CONTROL PANEL

The amplifier has a combination of controls and connectors to ensure the most versatile loudspeaker system.

1. LINE/MIC INPUT
   These balanced inputs accept a standard XLR (female) connector and a 3 fk “ TRS phone jack connector. A range of signals from microphones, audio mixing consoles, and electronic musical instruments may be connected here. The sensitivity of this input is controlled by the LINE/MIC SWITCH. This input does not provide phantom power.

2. LINE/MIC SWITCH
   The selector must be in the “MIC” position for MIC inputs. The MIC setting should only be used if a microphone is connected directly to the in MIC/LINE input
   CAUTION: Using the MIC setting for other purposes may introduce distortion. For other sources the selector must be in the “line” position, this should be used for most other audio inputs.

3. INPUT LEVEL KNOB
   Sets the sensitivity of input A and B channel which controls the signal level sent to the amplifier and the mix out .

4. MP3 LEVEL KNOB
   Turn this knob to adjust the input volume of USB flash or Bluetooth input.

5. 5. MASTER KNOB
   To adjusts master volume of all inputs (the Mix out will not be
   controlled by this knob.)

6. EQ KNOB (TREBLE MID & BASS)
   Use these knobs to adjusts the 3 different frequencies of the speaker.
   TREBLE: Increases or decrease the high frequency for MIC / LINE/
   MP3 sources at a range between -10dB to +10dB.
   MID: Increases or decrease the middle frequency v for MIC / LINE/
   MP3 sources at a range between -10dB to +10dB.
   BASS: Increases or decrease the Low frequency for MIC / LINE /
   MP3 sources at a range between -10dB to +10dB

7. MIX OUT
   Output XLR is a mix of channels A/B and MP3 player. Produces a line-level output signal that is Post Gain. Any adjustments made to the gain of these A/B channel and MP3 affects this output signal. It works as signal output to link the other active speaker.

8. AC INPUT
   Standard IEC AC input connector. 230V/5A AC fuse.

9. POWER SWITCH
   Will illuminate when power is applied to the unit and the ON/OFF switch is in the ON position.

10. VOLTAGE SELECTOR
    Allows user selection of different local voltage ratings 1 15V/60Hz – 230V/50Hz.

11. POWER LED (BLUE)
    When power is applied to the unit and the ON/OFF switch is in the ON position this LED will be illuminated.

12. LIMITER LED (RED)
    This LIMIT LED illuminates when the output power is in overload. The red clip LED indicates that limiting has taken place to protect and avoid damage to the amplifier or loud-speaker. Continuously over driving the system will cause distortion and may lead to premature failure to the speaker system. If the red limit led is on when both LEVEL controls are at minimum, your loudspeaker requires service by qualified professional.

MEDIA PLAYER

13. USB PORT
    Connect your USB flash drive here to play music.

14. DISPLAY
    Display the media panel modes for USB & Bluetooth.

15. MODE
    Press this button to switch USB or Bluetooth mode.

16. PREVIOUS
    Press this button to play the previous song.

17. PLAY/PAUSE
    Plays or pauses the USB or Bluetooth media panel source.

18. FOLDER
    Press this button to select your MP3 files in USB flash.

19. NEXT
    Press this button to play the next song.

RECOMMENDED CONFIGURATIONS

Daisy-chaining full-range systems

TWS MODE

1. Turn OFF both speakers.
2. Access BT application on the phone, and select ”forget” or ”remove“ ZL-X15BT from the phone, so it won’t interfere with TWS connection, v u will reconnect to it after.
3. Turn on both speakers and press MODE button until v LJ reach BT mode on both speakers.
4. Choose which speaker you want as the master (The master speaker is the one who will control the music). Press “Play” button for 3 seconds and release.
5. You will see one speaker says MASTER and the other SLAVE
6. Insert USB or connect the phone via BT to “ZL-X15BT” to the MASTER speaker.
7. Be sure to stream the music to the master device. If it is not working, you may have connected to the slave. Insert USB or connect to the other speaker.
8. To disconnect pairing, press and hold PLAY button for 3 seconds.

LDC1.2 LONG DISTANCE REMOTE

RETRACTABLE PULL HANDLE & WHEELS

Equipped with wheels and a retractable pull handle making it is easily portable. Perfect for Dance Studios, Musical Performance, DJ, Conferences, and Events

SPECIFICATIONS

GENERAL SPECIFICATIONs

• Nominal Diameter (speakers): 15″ / 381mm
• Number of Ways (speakers): 1000W
• Total Watts (Peak): 1000W: 2-Way
• RMS Power (Internal Amp): 250W
• MAX Power (Internal Amp): 500W
• Frequency Response: 42HZ-20KHZ
• spL output: s7dB
• Max SPL Output:127dB
• Coverage Pattern:90° x 60ᵉ

BODY- FEATURES

• Enclosure Material: polypropylene molded
• Waterproof Grade: NOT waterproof
• Grill Type: . Perforated Steel with Acoustically Transparent Black Cloth Backing
• Color: Black
• Monitor Angle: Yes, Both Sides
• Mounting: 35mm Pole Socket
• Handles: 3
• Transporting: Retractile T-top Handle and Wheels

WOOFER SPECIFICATIONS

• Voice Coil Diameter:  2.57″ / 65.5mm
• Voice Coil Former Material: Kapton
• Cone Material: Paper
• Surround Material: Cloth
• Basket Material: Steel
• Magnet Material: Ferrite
• Magnet Weight: 49.6 Oz

TWEETER SPECIFICATIONS

• Voice Coil Diameter: 1.75″
• Type: Compression Drive
• Diaphragm Material: Titanium
• Magnet Material: Ferrite
• Magnet Weight: 22.2 OZ

AMPLIFIER SPECIFICATIONS

• Amplifier Class: Analog A/B

• Amplifier Type: .Bi-Amplifier

• Number of Channels: 2 (Hi-Pass / Low Pass)

• Minimum Impedance: 3 ohm

• Audio Source: BT / USB / 2 x Line-MIC

• MP3 Player: USB MP3/WMA Player with Easy Folder & Files Search Button, BT v/î.2 with TWS (True Wireless Stereo)
  20K Ohm (Balanced)

• Line Input Gain: .Infinity to +4 dBu

• Mic Input Gain: infinity to +6 dBu

• Maximum Input Level: Line:+4dBu/Mic:-20dBu

• Equalizer: 3 band graphic Bass: 120hz +/- 6dB) ) (Mid: 1200hz +/- 6dB)

• Connectors: 2 x XLR-1/4” combo inputs; Mic/Line selector; 1 x XLR Mixed Output

• LED Indicators: .Front Power LED (White), Rear Power LED (Blue),
  Rear Clip LED (Red)

• Cooling: Passive Radiator

• Voltage Operation: 100-120VAC 50/60Hz; 230-240VAC 50/60Hz

• Power Consumption: Full Power — 3.5A (Max)

ENCLOSURE MEASUREMENT

• Overall Diameter: 17.5″ / 445mm
• Overall Depth: 13.77″ / 350mm
• Overall Height: 27.7″ / 7O5mm

FCC Compliance Statement

This device complies with Part 15 fo the FCC Rules. The operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause
undesired operation.

Note: This equipment has been tested and found to comply  with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio of television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following Measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.”

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and  used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>