aovo W11 2-Axis Gimbal Drone with 4K Camera User Guide

W11 2-Axis Gimbal Drone with 4K Camera
User Guide

(Please keep and read this manual carefully before using this product)

W11
www.aovotoys.com
Customer Service Email: support@aovotoys.com

OPERATION GUIDE

Download APP

https://play.google.com/store/apps/details?id=com.vison.macrochip.w.gps
https://apps.apple.com/cn/app/w-gps/id1514763409

Scan the QR code, corresponding to either App Store™ or Google™ Play Store and download the “ W – GPS ” application for free.
Required Operating Systems: iOS v8.0 and later / Android v4.3 and later
Tips : Please use a smartphone that can support receiving 2.4G and 5G WiFi signals.
Pairing

1. First, press the drone Power Switch and quickly release it. Then, press again and hold for approximately 2 seconds. The drone will emit a sound and the battery LEDs will brightly illuminate indicating it is now powered up.
   Place drone on a flat, level surface with the head facing forward.

2. Turn on the switch on the controller by sliding it to the top. Once the controller emits a “beep-beep” sound it confirms that the drone and controller are now successfully paired.

Connect to Wi-Fi

1. Connect your smartphone to the Wi-Fi network created by the drone.
   Check the drone’s status in the ”W – GPS” App.

2. Your smartphone will launch a search of the available Wi-Fi networks:
   

3. Select the Wi-Fi network: AOVO-W11-**.

4. Wait for several seconds until your smartphone connects to the drone’s Wi-Fi network.
   This connection is generally represented by the Wi-Fi logo appearing on your smartphone’s screen.

5. Launch the W – GPS application.

   The connection between your smartphone and the drone will be established automatically.

Calibrating the Compass

After pairing operation, the LED lights of the drone are sharp-flashing, which that means is begins compass calibration.

Step 1:
Now, the APP interface displays the above diagram, and the Compass calibration icon in the controller screen is flashing. Hold the drone horizontally and rotate the drone in approximately 3 complete circles. When completed, the controller emits a “beep” sound, and the drones.

Step 2:
Now, the APP interface displays the diagram. Hold the drone vertically and rotate the drone in 3 complete circles. When completed, the controller emits a “beep” sound and the drone’s LED lights become solid and the Compass calibration icon on the controller screen is solid on.
Attention:

• The Gimbal is detected 10 seconds after compass calibration, please do not touch the Gimbal directly, otherwise, the Gimbal may damage.
• When it indicates “Equipment connected (GPS Model)” in the APP interface, means that the drone receives the GPS signal. Now, the rear LEDs of the drone will flash twice per second.
• Every time the drone is powered on the compass calibration should be performed.

Gyroscope calibration

Now, the APP interface displays the diagram (Pic 3). Place the drone on the level surface and . The LED lights of the drone will flash rapidly for about 3 seconds. When completed, the front and rear lights turn solid. Or press the Gyroscope calibration switch “ ” on the remote control. The LED lights of the drone will flash rapidly for about 3 seconds. When completed, the front and rear lights turn solid.

Unlocking/Locking the Motor

Please unlock the motor before take-off.

Press the button “ ” , the motors rotate.(Pic 4)

1. Unlocking the motor
   Please unlock the motor while it indicates “Equipment connected (GPS Model)” in the APP interface.

2. If you do not perform any operation approximately 10 seconds after unlocking the drone, the motors will stop rotating.

3. Press the button “ ” again, the motor will stop rotating and the drone will be locked.

One Key Takeoff/Landing

1. After unlocking the drone, press the “ ” button on the controller and the drone will automatically take off and hover at 1.5m altitude. Or press the “ ” in the APP interface, then “ ”after unlocking the motors.
2. When drone is flying, press the “ ” button on the controller, the drone will fly back to the Home Point and automatically land on the ground. Slide right to confirm Tips: Before flying, make sure the GPS Mode is turned on in case the drone gets lost!

CONTACT US
Please do not hesitate to contact us if you need further support.
Customer Service Email: support@aovotoys.com

Made in China

Documents / Resources

| aovo W11 2-Axis Gimbal Drone with 4K Camera [pdf] User Guide
W11, 2-Axis Gimbal Drone with 4K Camera, W11 2-Axis Gimbal Drone with 4K Camera
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>