RETEKESS TD110 Watch Receiver User Manual
- June 6, 2024
- RETEKESS
Table of Contents
RETEKESS TD110 Watch Receiver
Overview of Watch Receiver
Instruction of Buttons
【Setting】button, long press the button to enter the setting mode, and short
press to enter the sub-menu.
【Up】 button, short press to skip one step to the last menu, and long press to
continuously skip.
【Down】 button, short press to skip one step to the next menu, and long press
to continuously skip.
【Back】 button, In standby mode, short press to clear the current calling
information, long press to delete all calling information. When in the setting
mode, short press to return to previous menu, long press to return to main
interface.
【Indicator Light】 : Light a twinkle green when there is a call; Light turns
red when the watch in charging mode; Light turns green when it is fully
charged.
Operation Instruction
-
Turn on/off
A.Turn on: Press【Back】button for 3s until the LCD screen light up, then it is turned on and showing the current time.
B. Turn off: Long press 【Back】button for 3s when the watch is on, short press【Up/Down】 button to select Turn off , then short press【 Setting】button to turn it off. Nothing is displayed on the display after shutting down. (The presetting date, time, alarm and timer switch are still available when the watch turned again).
C. Reboot: Long press 【Back】button for 3s when it is on, short press 【Up/Down】 button to select Reboot, then short press”Setting” button to restart the watch. -
Function Setting
2.1 Caller Setting
Add/ Delete Caller Long press【Setting】button to enter Menu list and select Caller Setting.
Short press【Setting】button to enter the sub-menu and select Add/Delete Caller.
Short press【Setting】button into the caller adding interface, it shows ID:0001 on the display.
Short press【Up/Down】buttons to choose the ID number to be registered.
Short press【Up/Down】buttons to choose the ID number to be registered.
Long press【Setting】 button to move the cursor position, the letter can be selected among 0- 9, A-Z and -,_ or blank. Each ID number can add one or more caller (max 999pcs). After setting the ID number, the screen displays “Press Caller” in the bottom, then press any button of the caller, the watch will beep when it receives the signal, it means the registration is successful. The screen will display an ID increased, ( The number before the / icon represents the quantity of the callers that have been added for the current ID, the number after the / icon represents the quantity of the callers that have been added in total for all the IDs). Then the ID number will automatically go to the next. If you have not pressed the transmitter, but the number is automatically increased during adding callers, it means that you added a caller from someone else.
Short press【Down】button to return to the previous ID
Short press【Setting】button to delete the wrong transmitters.
Every short press【Setting】 button will delete one.
Note: The repeated registration of the same call button will default to the last ID, because each call button can only register one ID
● Delete All
Long press【Setting】button to enter Menu list and select Caller Setting.
Short press【Setting】button to enter the sub-menu and select Delete All.
Short press【Setting】button, it will appear ” confirm ? Yes”
Short press【Setting】button again to delete all transmitters
(Note: please use this step with caution as it cannot be restored) Short press【Back】button to return to Menu list
2.2 Key Function Setting
Long press【Setting】button to enter Menu list and select Key Function Setting.
Short press【Setting】button to enter the sub-menu. Set the ID number first, long press【Setting】 button to move the cursor position Short press【Up/Down】 button to select the desired value.
Short press【Setting】button twice to enter the keys function setting , when it display “water”, press the corresponding key on the call button, the watch beeps “di” and it shows “Succeeded” on the display, it means it has been set up successfully.
Short press【Up/Down】button again to set other call buttons (with custom key value) in the same way.
If you need the same key function of all callers under this ID, you can copy the key function of this caller to all other callers after setting up the caller (Note: you have to add the caller before setting the key function).
2.3 Pager ID Setting
Long press【Setting】button to enter Menu list and select Pager ID
Short press【Setting】button to enter the sub-menu
Short press【Up/Down】button to select the desired value (01-99 optional)
Short press【back】button to return to Menu list
2.4 Prompt Setting
Long press【Setting】button to enter Menu list and select Prompt setting
Short press【Setting】button to enter the sub-menu
Short press【Up/Down】button to select the prompt modes (Light/Vibrate/Beeps)
Short press【Setting】button to Confirm /Cancel
Short press【Back】button to return to Menu list
2.5 Repeat Time Setting
Long press【Setting】 button to enter Menu list and select Repeat Time
Short press【Setting】button to enter the sub-menu
Short press【Up/Down】button to select repeat time (3/6/9/12/15 times)
Short press【setting】button to Confirm Short press【back】button to return to Menu lis
2.6 Auto Clear Time Setting
Long press【Setting】button to enter Menu list and select Auto Clear Setting Short press【Setting】button to enter the sub-menu
Short press【Up/Down】button to set the time of auto clearing, “000” means that the call records won’t be deleted automatically.
Short press【Back】button to return to Menu list
2.7 Timing Boot
Long press【Setting】button to enter Menu list and select Timing Boot
Short press【Setting】button to enter the sub-menu, the pager can set up to 10 groups of timing
● Add timing switch
Short press【Up/Down】button to select “add”
Short press【Setting】button to enter the sub-menu
Short press【Setting】 button to set hours, minutes, weeks and choose timing on or timing off
Short press【Up/Down】button to select the
desired value Short press【back】button to return to Menu lis
● Edit timing switch
Short press【Up/Down】button to select the added timing that need to be edited Short press【Setting】button to enter the sub-menu
Short press【Setting】button to set hours, minutes, weeks and choose timing on or timing off Short press【Up/Down】button to select the desired value
Short press【Back】button to return to Menu list
● Delete timing switch
Short press【Up/Down】button to move to the added timing which need to be deleted Long press【Setting】button to delete the selected value
2.8 Alarm Setting
Long press【Setting】button to enter Menu list and select Alarm setting
Short press【Setting】button to enter the sub-menu.
Users can set up to 10 groups of the alarm clock. The alarm is still active even when the pager watch is off
● Add alarm
Short press【Up/Down】button to move to “add”
Short press【Setting】button to enter the sub-menu.
Short press【Setting】button to move to hours,minutes,and the weeks
Short press【Up/Down】button to select the desired value
Short press【Back】button to return to Menu lis
● Edit alarm
Short press【Up/Down】button to move to the added alarm which need to be edited
Short press【Setting】button to enter the sub-menu
Short press【Setting】button to move to hours, minutes, and week
Short press 【Up/Down】button to select the desired value
Short press【Back】button to return to Menu lis
● Delete alarm
Short press【Up/Down】button to select the value that need to be deleted Long press【Setting】button to delete it
2.9 12H/24H Setting
Long press【Setting】button to enter Menu list and select 12H/24H settin
Short press【Setting】button to enter the sub-menu
Short press【Up/Down】 button to select time mode (12H/ 24H) ,
Short press【Setting】button to Confirm
Short press【back】button to return to Menu list
2.10 Date&time setting
Long press【Setting】button to enter Menu list and select Date&time setting
Short press【Setting】button to enter the the setting menu
Short press【Setting】button to move to hours, minutes, seconds, year, month and day
Short press【Up/Down】button to select the value
Short press【back】button to return to Menu list
2.11 Language setting
Long press【Setting】button to enter Menu list and select Language setting
Short press【Setting】button to enter the sub-menu
Short press【Up/Down】button to select the desired language (EN/CH/RU/PT/IT/ES/DE/FR )
Short press【Setting】button to confirm and return to Menu list
2.12 About
It shows the software version of this product.
2.13 Default setting
Long press【Setting】button to enter Menu list and select Default setting
Short press【setting】button to enter the sub-menu
Short press【Up/Down】button to select Recover/cancel
Short press【Setting】button to confirm
Short press【Back】button to return to Menu list
Package Includes
- Watch receiver*1
- USB charging cable*1
- User manual*1
RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE
| Before using this radio, read this guide which contains important operating
instructions for safe usage and rf energy awareness and control for compliance
with applicable standards and regulations.
---|---
Local Government Regulations
When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has a RF Exposure Product Label. Also, your Retekess user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Unauthorized modification and adjustment
Changes or modifications not expressly approved by the party responsible for
compliance may void the user’s authority granted by the local government radio
management departments to operate this radio and should not be made. To comply
with the corresponding requirements, transmitter adjustments should be made
only by or under the supervision of a person certified as technically
qualified to perform transmitter maintenance and repairs in the private land
mobile and fixed services as certified by an organization representative of
the user of those services.
Replacement of any transmitter component (crystal, semiconductor, etc.) not
authorized by the local government radio management departments equipment
authorization for this radio could violate the rules.
FCC Requirements:
-
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may causeundesired operation. -
(If applicable) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
CE Requirements:
- (Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co.,Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.
- Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life.
Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
IC Requirements:
Licence-exempt radio apparatus This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
RF Warning Statements
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
RF Exposure Information(if appropriate)
- DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
- To avoid interference, turn off the radio in areas where signs are posted to do so.
- DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.
Avoid Choking Hazard
Small Parts. Not
for children under 3 years.
Protect your hearing:
- Use the lowest volume necessary to do your job.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio’s speaker directly against your ear
- Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing los
Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio’s volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
Approved Accessories
- This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
- For a list of Retekess-approved accessories for your radio model, visit the following website: http://www.Retekess.com
Remarks:
- This guarantee card should be kept by the user, no replament if lost.
- Most new products carry a two-year manufacturer’s warranty from the date of purchase.
- The user can get warranty and after-sales service as below: Contact the seller where you buy. Products Repaired by Our Local Repair Center
- For warranty service, you will need to provide a receipt proof of purchase from the actual seller for verification.
Exclusions from Warranty Coverage:
- To any product damaged by accident.
- In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs.
Henan Eshow Electronic Commerce Co., Ltd
Add: 7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District,
Zhengzhou, Henan, China
Facebook: facebook.com/Retekess
E-mail: support@retekess.com
Web: www.retekess.com
Documents / Resources
|
RETEKESS TD110 Watch
Receiver
[pdf] User Manual
TD110, Watch Receiver, TD110 Watch Receiver
---|---