Select Design Q9 Portable Bluetooth Speaker User Manual

June 6, 2024
Select Design

Select Design - LOGO Q9 Portable Bluetooth Speaker
User Manual
Select Design Q9 Portable Bluetooth
SpeakerThank you for choosing our product. We hope you will enjoy it very much.

Safety instructions

Read this manual carefully before putting the appliance into operation and keep this manual for future reference.

  • Keep the device away from heat. direct sunlight and sharp edges.
  • Keep the device away from naked flames.
  • Do not insert any metal object into the device.
  • Risk of short circuit!
  • To avoid a static charge, do not use the device in an extremely dry climate.
  • Do not repair the unit yourself but contact an authorized specialist.

Product Overview

Select Design Q9 Portable Bluetooth Speaker - Produet
Overview

Accessories included
I pc USB charging cable

Charge Integrated Battery

This speaker is powered by integrated rechargeable lithium battery. Charge the battery as follows:

  1. Insert the charging cable into the DC SV socket on the unit. Connect the USB plug into a PC or AC /DC adaptor. The LED indicator turns red and the battery is being charged.
  2. When the battery is fully charged, the red LED indicator goes out.

Pairing BTS-06 to mobile phone or other devices
Activate the speaker’s pairing mode by when in power off mode, press and hold the on/off button for about 6 seconds until the red LED and blue LED are flashing  alternatively.
Now the speaker is ready for pairing.

Tips:
Please make sure the speaker is in power-off mode When trying to activate the pairing mode.

  1. Turn on your mobile phone and activate the function.
  2. Search for devices. BTS-06 will show up.
  3. Pair your device with BTS-06. If a password is needed, type in”0000″, After BTS-06 is paired with your device, connect it to your device.

Tips:
Once this speaker is paired and connected te) your mobile phone, next time when you switch on this speaker, it will connect to your mobile phone automatically as long as the
in your mobile phone is on

Button description

On Off: To switch on or off the unit
Short press for the previous song, long press for turning down the volume.
Short press for the next song, long press for turning up the volume.
Phone: To pickup or hang up a phone call
Play Pause the music
Notes & tips:

  1. You can press Phone button twice quickly to redial the last phone call

Troubleshooting

Symptoms Causes Solutions
Can not switch the speaker on Battery empty **Charge the

battery
Unable to pair the speaker| Speaker is already switched on, and it is not in pairing mode.| Refer to the section of “Pairing BTS-06 to mobile phone or other devices”**

Technical Specifications

support: 5.0+EDR
Range: I0 meters
Transmitting frequency: 2.4G Hz
Power supply: DC5V 100-120mA
Battery: 3.7V 300mAh lithium
Charging time: approx. 2 hours
Operating time: approx. 2hour
IP grade: [Px4
Unit weight: approx.0.1 kg

Select Design Q9 Portable Bluetooth Speaker - ICON 6

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals