Dongguan Simzo Electronic Technology WXC-01 3 in 1 Wireless Charger User Manual
- June 6, 2024
- Dongguan Simzo Electronic Technology
Table of Contents
User Manual
3 IN 1 Wireless Charger
Packaging is for sampling only, not for sale
Notice: To ensure charging 3 devices safely and efficiently, you must use
a 9V/2A adapter and quick charge cable, if including 15W fast charging phones,
you must use 9V/2.7A or 9V/3A adapter and quick charge cable (if not use the
appropriate adapter and quick charge cable, the charger may not charge phone
fast, or may not charge 3 devices simultaneously, or may even damage the
charger)
- Wireless charge iWatch magnetically area
- Wireless charge area for Phone
- LED Intelligent light
- Wireless charge area for ‘TWS earphone
- Non-slip mat
- DC3.5 port
- Non-slip mat
- Product tag
- Radiator hole
Before using it for the first time, please remove the protective film of the 4 and 7 area
Product Introduction
The 3-in-1 wireless charger, a compact charging house, powered by only one outlet, can charge 3 devices simultaneously. When charging your mobile phone, apple watches, and your AirPods 2 or AirPods Pro, just put them on, wireless charging will automatically start, all this will make your desk clean and tidy, and make your life easier. The charger is so space-saving designed, which can help you integrate your mobile phone intelligence and life very well, especially for Apple users. Besides, it is fashion that the light is so shining and has the corresponding colors showing the charging state.
Operation Steps
- Connect the charger to a 9V/2A, 9V/2.7A or 9V/3A adapter through a DC3.5 quick charge cable to switch on the power.
- Put your phone on then charge.
- Put the apple watch on and adsorption it to charge (roll the watch band to minimize to charge better).
- Put your earphone on then charge.
LED light instructions
- light is off Standby mode or not charging the phone
- Blue light is on: Wireless charging the phone
- Red light is on Wireless charging the earphone
- Purple light is on: Wireless charging the phone and earphone simultaneously
- Blue or Red light flashes: Foreign body is detected or the phone is misaligned (the phone charging will automatically stop)
Charging Schematic Diagram
Charging 3 Apple devices simultaneously
Applicable Devices
1. Smart Phone
-
Apple: iPhone 12, 12 Pro, 12 Pro Max, 12 mini, 11, 11 Pro, 11 Pro Max, Xs, Xs Max, XR, X, 8, 8 Plus.
-
Samsung: Galaxy S: 20, 20+, 20 Ultra, 10, 10+, 10e, 9, 9+, 8, 8+, 7, etc.; Galaxy
Note: 10, 10e, 10+, etc.. -
LG: G7 ThinQ, G7+ ThinQ, G8, G8 ThinQ, V30, V30+, V35, V40
ThinQ, V50, V50 ThinQ, LG Lucid2 (VS870), LG Optimus F5 (As870), LG
Optimus Vu 3, Spectrum 2, Optimus G Pro, Optimus Vull, Optimus LTE 2, etc. -
MOTOROLA: Droid Turbo 2, Droid 5, Moto Maxx, Ultra M, Moto X Force, etc.
-
Huawei: P40 Pro, P30 Pro, Mate 40, Mate 40 Pro, etc.
-
Xiaomi: 10, 10 Pro, 9, 9Pro, Mix 3, Mix 2s, etc.
Including other devices with wireless charging receiver built-in.
Other some devices need to add a wireless charging receiver.
(Note: All devices must meet the Qi standard)
2. SmartWatch: Apple: iWatch S1, S2, S3, S4, S5, S6, SE.
3. Earphone: AirPods 2, Pro; Galaxy Buds, buds+; Other TWS earbuds which
support wireless charging
Product Specification
Input: 9V/2A, 9V/2.7A or 9V/3A (must use 9V/2.7A or 9V/3A when charging 3
devices including 15W charging a phone)
Phone Output: 15W/10W/7.5W/5W
Watch Output: Max 2.5W (Apple iWatch 51, S2, S3, S4, S5, S6, SE)
Earphone Output:Max 5W (TWS
Earphone: Apple AirPods 2, AirPods Pro, and more)
In put Interface: DC3.5 port
Transmission Distance(Phone): 56mm
Conversion Rate(Phone): 72°/0
Product Size: 133X69X18.7mm
Accessories List
Wireless Chargerl, Adapter1, User manual*1
Attention
- Please keep the charger away from water or other liquid.
- If you need to clean the charger, please make sure it is not connecting to the power supply.
- Using Environment temperature remains 0-45°C.
- The charging environment of smartphones will not be a55°c(a1 31 T.).
Answer questions
1. If you’re experiencing interrupted or slow charging, check the following:
-
The back of your phone should not have any metal, pop sockets, or credit cards.
-
Put the phone in the center of the charging surface (this lets the charging coil in your phone align with the one inside the wireless charger).
-
The wireless charging coil on Sony phones is located slightly below the center.
-
Phone cases should be no thicker than 5mm for effective charging.
-
Check whether the adapter is a 9V Output charger.
2. If you’re failing to charge your device, please try out the following: -
Please restart your cell phone and test with another USB cable.
-
Please check whether the indicator turns on or not.
-
Please check the adapter is output 9V or not, iPhone original adapter does not match the wireless charger.
-
Please check your phone case thickness(55mm). Metal ring or Magnetic Pad will not be available.
3. If you’re using the recommended wireless charger with the adapter and have removed any potential charging obstructions, but are still experiencing issues, try: -
Replacing the cable connecting your wireless charger.
-
Rebooting your phone.
-
Unplug the adapter and reinsert.
FCC STATEMENT:
This equipment has been tested and found to comply with the limits for a WPC
device, pursuant to Part 18 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
product. To maintain compliance with FCC’s RF exposure guidelines, this
equipment should be installed and operated with a minimum distance of 20cm
between the radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits
for a wireless power charger, pursuant to Part 18 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements.
Manufacturer:
Dongguan SIMZO Electronic Technology Co., Ltd.
Add No.6 Zhangzhou Road, Daojiao Town,
Dongguan City, Guangdong
Province, 523187, P.R.China.
Tel: +86-769-22988335
Email: info@simzo.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>