Dongguan Hiper Song Electronic Technology HS-BT611 Mini Soundbar Speaker User Guide

Mini Soundbar Speaker
HS-BT611

10W PORTABLE MINI SOUNDBAR

**Warnings and advice

**

Keep away from naked flames, and dripping or splashed fluids.
The unit should not be exposed to direct sunlight, very high or low temperatures, moisture, strong magnetic fields, high frequencies, and dusty environments.
Do not use abrasives, benzene, thinner, or other solvents to clean the surface of the unit. To clean, wipe with a clean soft cloth it and a mild detergent solution.
Never attempt to insert wires, pins, or other such objects into the vents or openings of the unit.
Do not disassemble or modify the soundbar, there are no user-serviceable parts.
If the soundbar is damaged or malfunctions do not use it. Consult a qualified service engineer.
This product contains a Lithium battery. It must be used and charged properly. Improper use can cause the battery to catch fire or explode resulting in serious or fatal injury.
Box Contents
1x 10W Portable Mini Soundbar
1x Micro USB charging cable
1x 3.5mm to 3.5mm AUX-IN cable

Introduction

Your IS-SB02 Portable Mini Soundbar combines a very compact design with an excellent audio response. The two built-in 10W drivers provide clarity across a broad frequency range, with crisp treble and deep bass. Input options include Bluetooth, AUX-IN, and MP3/WAV files on flash media via USB port.
Front Panel Connection and Controls

1. Speakers
2. Play/Pause
3. Previous Track / Volume
4.Next Track /Volume+
5. Mode Selection
6. Blue LED Indicator| 7. OFF/ON Switch
8. AUX-In Port
9. USB Port
10. SD/TF Card Slot
11. Micro USB Charging Port
12. Red LED Charging Indicator
---|---

Charging your Soundbar
The IS-SB02 has a built-in rechargeable Lithium battery. For best results, the first time you use the soundbar, let it charge for 5-6 hours until fully charged. The red LED will show red during charging. Follow the steps below.

Powering on your Soundbar
To turn on your soundbar, follow the steps below.

The blue LED will show a solid blue when the device is on.
Bluetooth Mode
The soundbar will automatically enter Bluetooth mode and will enter into pairing mode if no device has already been connected. Follow the steps below to connect.

The flashing LED shows the soundbar is in pairing mode.

When paired the blue LED will flash slower.
The soundbar will now automatically reconnect with this device whenever it is within range and has Bluetooth turned on.
Bluetooth Mode Controls
Select a piece of music, podcast, audiobook, etc., and play! You can control the audio from the device or your soundbar.

1. Short press +: Next track
2. Press and Hold +: Volume up

3. Short press ­ : Previous track
4. Press and Hold ­: Volume down
Bluetooth Call
When connected through Bluetooth, you can answer, decline, and end calls using the soundbar.

1a. Short press : Answer call
1b. Short press : End call
2. Press and Hold: Decline call
AUX IN Mode
The soundbar will automatically enter into AUX mode when an AUX 3.5mm – 3.5mm stereo jack cable (supplied) is connected to a compatible device, such as a mobile phone or laptop, and inserted into the AUX-in port on the soundbar.

The audio can be controlled using the soundbar or device.
USB and Micro SD/TF Card MP3 Media Mode
The soundbar is compatible with USB flash drives up to 64GB in size (FAT32 format) and can playback MP3 and WAV audio files. The soundbar is also compatible with and can play MP3 loaded onto a TF/Micro SD card.

Memory Function
The media player also has a memory function, when a previously played USB flash drive or TF/ Micro SD card is reinserted it will recall and continue playing from the same point in the last played audio file. Ideal for interrupted podcasts or audiobooks.
FM Mode
The soundbar also has a built-in FM radio mode, allowing to listen to FM radio stations.

Connect the AUX IN cable (supplied) and fully extend to improve reception.
Press the Mode Selection button (5) to enter FM Mode.
Press the Play/Pause button (2) to Auto Scan for all available FM Frequencies.
Press the Previous/Next buttons (2) to select skip to next or previous available FM radio stations.
Low Battery Charge Warning
When the battery reaches a low charge you will hear a repeated “low battery” voice message every 15 seconds. If the soundbar isn’t placed on charge and the battery reaches a certain level, after 15 seconds the soundbar will switch off.
Power Saving Function
To conserve power, the soundbar will turn off after 15 minutes of inactivity. In order to use the soundbar again, turn it off and back on.

Specifications

socket with a charging cable
There is no sound being emitted| Adjust the volume on your Bluetooth or AUX devise as well as on the soundbar for optimum volume and sound quality| Make sure that your Bluetooth device is an ineffective range| Ensure that the Bluetooth
the device is paired or AUX device
is properly connected
In BT/AUX mode the soundbar switches itself off| Soundbar switches off automatically
after 15 mins if there is no input
in Bluetooth/AUX mode| Switch the soundbar power button off and on again| Pair your device again if necessary
USB drive/ TF Card
files won’t play| The audio files are not compatible: must be MP3 or WAV format| The USB flash drive is not compatible, must be maxed 64GB, FAT32 format

Technical Support
For further advice please visit our technical website at http://www.philex.com/products/technical-support/
Declaration of Conformity
Hereby, Philex Electronic Ltd. declares that the radio equipment: model 90093PI i-Star 10W Portable Mini Soundbar for radio broadcast reception in domestic premises is in compliance with the Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.philex.com/doc

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Waste electrical and electronic products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority for recycling advice.

Made in China. ©
Philex Electronic Ltd 2021. vb1.1
www.istarproducts.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>