Gold Fingers Technology TWS-12N ANC TWS Wireless Earbuds User Manual
- June 6, 2024
- Gold Fingers Technology
Table of Contents
TWS-12N
User Manual
ANC TWS Wireless Earbuds
CONTENTS
PRODUCT INTRODUCTION
Specification|
---|---
Pairing name| TWS-12N
Bluetooth version| V5.2
Battery| 50mAh ( each earbud )
500mAh ( charging bas
Play time| 7H (ANC off)
6H (ANC on)
Call time| 7H (ANC off)
6H (ANC on)
Earbuds charging time| 1.5H
Case charging time| 2H
Standby time| 180days
Charging port| Type c
OPERATING
Power On / Off
While the earbuds are into the charging case, open the case cover the TWS-12N
will Power On automatically. Put earbuds back into the case earbuds LED
indicator RED light solid and Power Off automatically.
Answer / Hang Up / Reject the Call
Clik L or R earbud to answer the phone call while the incoming call. Double-
click L or R earbud to reject the call while the incoming call. Double-click L
or R earbud to hang up the call while calling.
Play / Pause Music
Double-click L or R earbud to Play/Pause while playing music.
Pre / Next Song
Triple-click L earbud to return to the previous song while playing music.
Triple-click R earbud to the next song while playing music.
Voice Assistant
Press and hold 2 seconds the L earbud to wake up the voice assistant. ANC On
Transparency ANC Off Mode Press and hold 2 seconds the R earbud to change the
ANC or Transparency or ANC Off normal mode.
GET STARTED
Take ” TWS-12N” out from the charging case, both earbuds will power on and pair each other automatically, at the same time, the master earbud will blink the RED and GREEN light alternately. Open the device wireless and chose the name “TWS-12N” on list, then you will hear CONNECTED from the earbud.
RESET
Clear pairing records Put back both earbuds into the charging case, open the cover, and hold the multi-function button of charging case5S until charging case four LED indicators blink 10 times at the same time, it means clear pairing records successfully.
CHARGING
Please use the provided charging cable to recharge the earbuds by the charging case. Charging case LED indicators in white when charging. After full recharged, 4 LED indicators on the charging case stay on.
ACCESSORIES
Wear the right size ear caps for your ears. Adjusting earbuds correctly
achieves the best noise reduction performance and sound quality.
NOTES
- Avoid prolonged exposure to the excessive volume that may cause noise-induced hearing impairment. Turn the volume down before putting on your earphones, then adjust it to the right volume.
- Don’t use earphones while driving or riding your bike
- Stay away from sharp edges, uneven surfaces, metal parts, and anything that could damage the earphones.
- Do not modify, repair or remove earphones without professional guidance.
- Do not use corrosive or volatile liquid to clean the earphones.
- Do not use earphones in dangerous environments.
- These earphones contain small parts, which may cause choking hazards Please keep away from children and pets to prevent accidents.
- Battery warning:
Improper use of the battery may cause fire or chemical bums. The battery may explode in case of damage.
The battery can only be charged using an adapter specially provided for this product.
Please dispose of batteries according to local regulations. Recycle if possible. Do not dispose of batteries as household waste or throw them into a fire, lest they explode.
Please refer to the user manual for instructions on the charging status indicator.
FCC STATEMENT
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.