Shenzhen Fuvision Electronics FWS-S30 Solar Battery Camera User Manual
- June 6, 2024
- Shenzhen Fuvision Electronics
Table of Contents
Wifi
Intelligent Solar Energy Alert PTZ Camera
User Manual
v2. 2
PRODUCTS & PACKING LIST
1.1 Product picture:
1.2. Product list:
*1 Solar panel**
*1 PTZ Camera**
*1 Screw kit**
*lScrew kit**
• 1Hexagon spanner
• 1Screw driver
• 6Screws
•6Tapping screw
•1* USB charging cable
*1 User manual**
*1 Extral power cable 3m**
Product Diagram
1.3 Quick Setup
1.3.1 Insert the USB cable of the solar panel to the “USB” Silicon Flap on the
bracket base for battery charging.
1.3.2 Press the Power switch to turn ON/OFF the camera,
1.3.3 Wait for the voice prompt step by step for pairing the camera with the
APR
1.4 Note:
1.4.1 Before you turn on the camera, please close the silicon flap to avoid
rain leakage.
1.4.2.Make sure your phone is connecting to the 2.4Ghz wifi firstly before you
pair the camera.
INSTALLATION
2.1 Integrated installation
2.2 Separated installation
APP INSTALLATION
3.1. Scan the following QR codes or search for “UBox” from the App Store(for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.
http://app.ubianet.com/app/ubox/
3.2. APP REGISTRATION
3.2. 1.0pen the app then input your E-mail address then press ‘Register. Check
and select to agree on the agreement then your E-mail box will get a
verification code. ( For better users experience, please allow to open all
permissions to avoid missing any notifications from the app.)
3. 2. 2. Input the “Verification code” and press ‘Next’. (if you did not find
the mail you might find the code in your email Spam box. )
3.2.3. Set the login password and confirm the login password. Then press
‘Register to next step. (For your password safety, the password requires more
than 8 characters plus a combination of letters)
3.2.4. Enter your E-mail address, and input your login password. Then press ‘Login’.
**
WI-FI
CONNECTION
**
4.1. Press ‘Add Family’ then set the room or position as per reminders.
4.2.Enter your family name and then press ‘Next’.
4.3.Input the necessary information just like Country, Province, then press
‘Done’.
4.4. Press ‘Add a device’ to add a smart device
4. 5. Connect the device with a power supply, and make sure your mobile phone
is connected to an available Wi-Fi. Then press ‘Setup device’
4.6 After the power on the device, wait for the blue LED and voice prompt The
device is waiting for pairing, Which means your device is in pairing mode.
4.7. If you did not hear the voice prompt, please press the RESET button until
the blue indicator lights up and then release it. The device will reboot and
enter the pairing state.
4.8.The app will input the Wi-Fi name automatically, please input the correct
Wi-Fi password. Then you can choose the ‘QR code configuration’ or ‘Sound wave
configuration’ .
4.9.Sound wave configuration: Make sure the camera and mobile phone are within
1M distance, you will hear the wave sound DI Dl, follow the tips shown in the
mobile to finish the configuration.
4.10. QR code configuration: Select the QR code configuration then the mobile
phone display a QR code. Use the device to scan the QR code 10cm away from the
mobile phone. 4.11. Select the family name or device location then press
‘Done.’
4.11. The device will enter into the device list automatically. Setup success!
The device is ready to use.
DEVICES SETTING
****
Clock the.Czioncter. con on the rcht too corner . Men °Woe*? Ms este to paned( the N‘00e8 from Mud storage.
Choose the crested date to chock SI videos from the cloud
**SPECIAL NOTES!
**
6.1 . The device is equipped with a rechargeable lithium battery. The battery
life will be affected by the device’s wake-up time and the number of wake-ups.
Therefore, the PIR sensor alarm detection function is used in an environment
with a lot of people. It is recommended to turn off or set the device to low
sensitivity to reduce device wake-up and call times extend battery life. When
the battery is low, please charge the battery immediately.
6.2. Keep the device in the range of your router.
Make sure the device is placed close to the Wi-Fi route! If there have to be
thick or insulated objects between the device and the Wi-Fi router, which may
lead to a weak Wi-Fi signal, please make sure the Wi-Fi signal is at a good
level before you start using the device.
6.3.1t is a delicate device with a low power consumption design. Every time
the device is awakened and will work for a few seconds. After that, the device
will enter standby mode to save power. You can set the work time in the app
settings.
6.4.Because mainland China does not receive Google’s system push messages, you
need to open the app’s self-starting function on your phone to receive push
messages.
6.5. This device provides one month of free cloud storage services. If you
need to continue using value-added services after the trial period expires,
you need to purchase them in the app.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates. uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However.
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance. any changes or modifications not expressly approved by the party.
Responsible for compliance could void the users’ authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received. including interference
that may cause undesired operation.
FCC Radiation Exposure Statement: The equipment complies with FCC radiation
exposure limits set forth for uncontrolled enviroment. This equipment should
be installed and operated with a minimum distance of 20cm between the radiator
and your body.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.