Wo Smart Technologies GT5 Wearable Smart Watch User Guide

June 6, 2024
Wo Smart Technologies

Quick Guide

User manual

  1. Mon I features
  2. Basic lyncher
  3. Waterproof
  4. Cautions

Main features

The device supports multiple worts modes sleep monitoring, heart rate/body temperature blood pressure detectlorsMessoae push music-centered etc, apply to some Ire scenes.
1.1 Charge battery

Wo Smart Technologies GT5 Wearable Smart Watch -
battary

Please make sure the meted pile on charge decking could touch well The metal pule of devices recorsideAlter power on,  charge icon is showed on the display
Noted:

  • Moose use the attached customized charging cable to charges keep the Charge pole Is clean ond dry Delete dieter%
  • While not charging. please coke out the charging cable and power oft erred metol port concoct conductor by mistake to cause fire.

1.2 Power on/off


Power on long press power button or charge to turn on automatically. Power off: long-press the power button or switch to “power off” image to click.

1.3 Connect device with cell phone
Stort APP, do setting account, profile, etc, ope ote following the guide on APP

1.4 Basic operation

  1. Operate conveniently with the touch button or mechanic button.

  2. Power button:
    • Power on/off;
    • Short press on the main page, to access function page;
    • Short press on other pages, back to the main page.

  3. Touch button:
    • On home image,tap left/right/upward/downward,to switch to different function pages.
    • On the home page,long-press the screen to select a different watch face.

Basic functions

Function on/off setting
Some functions with the device need set first on APP, “Setting >Device>Switch settingslurn on your request function.(such as body temperature automatically, detect blood pressure automatically, etc)

Body temperature detection
is off by default. Once turn on this function, the device does 24/7 body temperature detection automatically and could test manually to get the data. Manu-al detection takes 5 to 10 minutes around.

Blood oxygen detection
Switch to the blood oxygen interface on the device and click “Start” to test. The test duration on the device is 1 minute. After synchronizing the data,the measurement results can be viewed on the APP. Manual measurement of blood oxygen from the APP, the measurement time is not limited, until the test is manually exited.

Heart rate detection
The heart rate data by detecting manually on the device end is not saved. The heart rate data by detecting manually on APP is not saved. On APP, turn on the function of detecting heart rate automatically, the device will implement 24/7 heart rate detecting automatically, the data in detail is to be shown on APP.

Message push
If a message shows on your cellphone, the device will inform you with vibration

  1.  Notification reminder is workable in the condition that the device and cellphone keep an efficient connection.
  2. Please make sure the function of notification reminder on your cellphone setting is on.
  3. Please turn on the notification reminder function on APP, “Setting”>”Device”>”Notification”.

Sleep monitoring
Sleep monitoring is set on by default. The user could switch to the sleep monitoring page on the device,to check the total sleeping duration there or come to the APP for checking sleeping data in detail,it doesn’t support noon nap detection and abnormal sleeping time(such as night work shift,or sleep in the daylight).

Multiple sports modes
You could tap the screen, come to the sports page, and select your preferred sports modes to start your exercise.

Music control
The device supports a music control function, you could switch to the last/next song, play/pause, and adjust the volume.

Time setting
Device time sync to cellphone’s time. On your cellphone setting, find time setting, you could set time and select 24/12 time format, reconnect APP, and refresh APP and sync.

Unit setting
If you want to modify the height and weight unit, please start APP, find”Setting”>”Unit “, to select the format.

Lock screen
Once the device turns on the lock screen function, please long press to the power button to unlock.

Self-define watch face
Device support self-define watch face, besides some scheme on watch,you could select your image saved in your phone to set as your own watch face.

Waterproof

3.1 The device support waterproof IP67, the factory has tested and shown the waterproof feature under the special situation.
3.2 The waterproof level is lower along with time.
3.3 Could use on occasions: Wash hand, rainy day, play water in the shallow water area, stop using it while taking hot shower, diving, surfing etc.

Notes: Below occasions might affect devices waterproof, please beware.

  • Device falls down,get hit, knock other things.
  • The device has soap water, shower gel, detergent, perfume, lotion, oil, etc.
  • Taking a hot shower,spa, this kind of high temperature/moisture occasion.

3.4 It is beyond warranty scope if the damage is caused by the liquid inside.

Cautions

4.1 For android 6.0.1 or above, need to turn on GPS location permission, they could show the Bluetooth device name on the Bluetooth list. Do setting by accessing phone’s setting> location (Different phones possibly is with a different path to find)
4.2 For i0S13 or above, if you have turned on notification reminder but still could not receive notification, it’s suggested to do setting via iPhone settings>bluetooth>device name, click the P1 icon, to turn on “share system notifications”.
4.3 When monitoring heart rate, you need to attach the photoelectric sensor on the back of the device to your wrist to keep it comfortable and fit.lf you wear too loose or too tight,it will affect the test data.
4.4 It shows the skin temperature on the wearing position, the showed skin temperature data is related to the environment and
4.5 clothing, could not indicate deep skin temperature, the data is not used for diagnosis or medical use. Valid detecting temperature scope: OT-50t, that is,32°F-122°F. 4.5 The device is not a medical device, the data is just for reference.
4.6 On the device screen, you could find the basic data on different function pages, sync to the APP for showing more details. ( Device keeps the data of 7 days for limited memory, to avoid losing data,it suggested to connect to APP every day.)

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals