Shenzhen Jiashibo Electronics JSB120 360 Wireless Controller User Manual
- June 6, 2024
- Shenzhen Jiashibo Electronics
Table of Contents
Shenzhen Jiashibo Electronics JSB120 360 Wireless
Applications
This product belongs to the 360 wireless control handle, used for the 360 host, the working frequencyis2.4GHZ,the long-distance wireless remote control, the operation is convenient, and it can be applied to the control of various games such as racing, fighting, and competition so that you can experience it during the game. Immersivefeeling. feature of product:
- 2.4GHz wireless technology, 30 feet (10 meters) effective distance
- Provide Live headset microphone interface
- Provide force feedback vibration effect, you can choose to turn off to save power
- Only used on Xbox 360 console
- Each Xbox 360 console can connect up to four wireless controllers
- You can use the rechargeable battery pack sold by Microsoft
- You can connect the USB rechargeable battery kit to charge and play while playing
- Built-in dual motors, 256-level precision 3D joystick;
- The buttons are responsive and easy to control;
- All functions of this product are the same as the original one
Buttons
The operation of starting and closing the wireless controller of the host is
as follows:
Start the wireless handle and host at the same time: press and hold the
navigation key in the center of the wireless handle until the handle is turned
on;
Turn off the wireless controller and the host at the same time: press and hold
the navigation button in the center of the wireless controller for 3 seconds,
and choose to turn off the host on the screen;
Turn off only the wireless controller: press and hold the navigation button in
the center of the wireless controller for 3 seconds, and select to close the
controller on the screen;
Turn off the host only: press the power button of the host
FCC Caution
(1)§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
§ 15.21 Changes or modification warning
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.