Paul Neuhaus 834943 LED Lamp User Manual

834943 LED Lamp
User Manual

Functions

• Wireless charger to charge smart watches and mobile phones (with QI wireless standards)
• Calendar

User Manual

• Connect the adapter with the socket behind the lamp.

(Notice)Use only the adapter included in the scope of delivery to operate the lamp. The adapter must not be used for other devices!
The range of activity for the lamp:

• The lamp arm can be foldable to a 90° angle.
• Fix the lamp base while adjusting the arm.
• The lamp head can be foldable to a 150° angle. (it may be broken if is over-adjust)

Battery change

Turn the battery compartment cover to the left to open the battery compartment. After replacing the battery, turn the battery compartment cover to the right to lock it.

Adjusting the display brightness

• As soon as the power supply is connected, the display lights up in the highest brightness setting
• Press the button ( ) and select the desired brightness from 3 brightness levels.

Operation Guide

• Touch switch operation: (see the drawing)
  

• Calendar and alarm setting:
  

• Date and Time setting:

1. In normal mode, press the ‘Set” button to achieve setting functions. press again to move to the next sequence.
   

2. Press “up” and “down” to set. Week changes automatically when the date change.

3. Press the “Mode” button to end or the setting mode will automatically end after 1 minute.

4. In normal mode, press the “up” button to switch between the “12h” and “24h” display.

Snooze function setting:

1. In normal mode, press the “Mode” button to achieve the alarm setting.

2. In alarm mode, press the “up” and ‘down” button to set the alarm sequence.
   

3. Press “up’ and “down” to set.

4. In alarm mode, press “up” and “down” to turn on/off the alarm and snooze the function. Press again to achieve the next function sequence:
   

5. When comes to alarm time, it will ring one minute, then snooze and ring again. Press any key to alarm off.

Temperature setting: In normal mode, press the “down” button to switch between “F” and “C”.

Wireless charging

Place the mobile phone with the technical standard QI on the charging point for charging. As soon as the light indicator lights up red and the screen shows the connection, your device will be charged. If you device does not display the charging status, check wheter the device is correctly positioned on the charging point.

• The light is in the charging state when the light indicator lights up.

The red light flashes and starts charging
The green light will light up when the mobile phone is fully charged. The mobile phone battery symbol will also show a full charge state.
(Only the function of wireless charging of mobile devices have a state of the charge indicator function. There is not this indicator if the mobile phone is equipped with a receiver when charging) The charging process is complete when the light indicator lights up green.

Specifications

This product contains a light source of energy efficiency class

Attention

• Do not self-dissemble the product. (Risk of electric shock)
• Use the included power supply for the lamp to ensure normal operation.
• Do not over-adjust the joint activity parts, to avoid any damage to the lamp.
• Do not put the lamp on the unstable desk to avoid dropping out.
• Do not put the lamp into a high temperature or high-humidity environment.
• Do not look at the LED light source. (Risk of eye damage)
• In cases below conditions occur, pull out the power cord and stop using the lamp.
• If needed, call for support staff:
• The power cord is broken.
• The lamp smokes or sparks.
• The lamp is abnormally flickering or the LED bulb is broken.

Paul Neuhaus GmbH
Olakenweg 36 • 59457 Werl
Germany
E-mail: kundenservice@neuhaus-group.de
Tel.: +49 (0) 2922 / 9721-9290

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>