WamBam BL19101 Nantucket Vinyl Picket Fence with Post And No-Dig Steel Pipe Anchor Kit Instructions
- June 6, 2024
- WamBam
Table of Contents
ASSEMBLY INSTRUCTIONS
BL19101
VER. 043021
GENERAL INFORMATION
IMPORTANT
- Check the inside of the larger pieces in your box for other materials packed inside.
- When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
- We recommend an area approximately 5’x 8′ for unobstructed assembling.
- You should not need to use excessive force when assembling components.
MISSING OR DAMAGED PARTS?
VISIT OUR WEBSITE FIRST, SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging and handling of
this product, occasionally problems occur. If you discover any missing,
damaged, or defective parts, please visit our website to order replacement
parts. If you experience any further trouble with your product, please contact
our customer service department.
parts.nychbrands.com
hmmm@wambamfence.com
704-892-5222 /
877-778-5733
Customer service agents are available to take calls weekdays from 9am5pm EST.
If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item number BL19101
and the specific part name which can be found on page 6. It is helpful if you
can provide the batch lot number listed on the inside of the box.
NEED ASSEMBLY HELP?
If you are having problems with the assembly or installation of this
product, we are happy to assist you with the process, so please give us a call
at 704-892-5222 /
877-778-5733.
NEED TO RETURN?
If for some reason you need to return this product, please allow us to help
resolve your issues first. If you still decide to return the product, you will
need to initiate the return from the company you originally purchased from.
TIPS
-
Run a string line to help establish the post location(s).
-
To space the pipe anchors more easily, use a piece of wood measuring 70″ in length from the inside gear to the next pipe anchor.
-
After you have installed the first two vinyl posts and have checked your spacing, temporarily remove the posts to create an unobstructed string line.
-
When cutting PVC, use a saw with a fine-toothed blade.
-
Once the pipe anchors are set, you can use your string line to adjust your lower donuts to make a straight fence line (Figure A). Then use a level to adjust the top donuts to ensure each post is level to the connecting fence panel (Figure B).
-
Most yards are relatively level and will allow for a fairly simple installation. If your yard is steeply pitched or is very uneven, you may need to stair step your panels as illustrated below. Post heights can be trimmed down as necessary.
Note: The bottom of the rail bracket on the higher side of the fence should sit flush to the top of the ground.
WARNING! If your yard has a severe slope or an elevation change greater than approximately 3″ to 4″ over one panel of fence, you will not be able to install this fence. Your post will not be long enough to accommodate this slope.
AVOID THESE
PITFALLS!
HAVE YOU CONTACTED YOUR
LOCAL UTILITIES?
| You must call your local utilities before you start installing your fence
to avoid puncturing any unseen underground utilities, especially electrical or
gas lines. Fortunately, this is made easy for you.
• Simply call 811 in the US or visit www.call811.com. k In Canada, visit
www.transcanada.com/contactus.html
for a list of phone numbers by province.
---|---
HAVE YOU CHECKED YOUR LOCAL ZONING LAWS?| Local zoning laws and Home
Owners Associations may regulate the height, style, and placement of your
fence. Some locations may even require a permit.
ARE YOU ABSOLUTELY SURE WHERE YOUR PROPERTY LINE IS?| Ensure the
installation of your fence is within your property line limits.
HAVE YOU TALKED TO YOUR NEIGHBORS?| Your fence will become part of their
yard too, and you’ll have an easier time building it if you can have access
from both sides. Besides, you may get lucky if they decide to share the cost
with you.
IMPORTANT!
UNSTABLE GROUND OR ROCK?| If you encounter rock or unstable ground, you can
concrete the pipe into place either during installation or afterwards.
DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS
STEP 1: LAY OUT MATERIALS
STEP 2: INSTALL PIPE ANCHORS AND POSTS
STEP 3: INSTALL BRACKETS AND BOTTOM RAILS
STEP 4: INSTALL PICKETS AND POST CAPS
| 6935 Reames Rd. Ste. K.
Charlotte, NC 28216
---|---
| hmmm@wambamfence.com
| 704-892-5222
877-778-5733
| WWW.WAMBAMFENCE.COM
NANTUCKET
VINYL PICKET FENCE WITH POST AND NO-DIG STEEL PIPE ANCHOR KIT
(4’H X 6’W)
60 MIN
Approximate assembly time
Want to see a video on how to assemble this product? Scan the QR code
http://wambamfence.com/QR/BL19101
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>