Huizhou Shi Daqi Technology

Huizhou Shi Daqi Technology DQ-M2 Music Starry Projector

Unboxing check

Thank you for purchasing our product,You can expect premium quality innovation and durability from our product. Please read the instruction manual carefully before use. Instruction manual contains necessary safety advice and user instuctions, follow the instruction manual to operate in order to avoic damaging the product for misuse.Check whether the product is damaged or not when you receive the product.

Package list

• Starry Projector x 1
• Remote controller x 1
• USB cable x 1
• User manual x 1

Warnings:
The power requirement of this product is USB DC 5V/2A.Once the range exceeded, please use the regulator device,otherwise it’ll shotten the product’s life span.

Notice:

1. Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
2. This product is suitable for indoor use.
3. The product is producted by LED

How to use

1. Indoor use,projection to the ceiling.
2. Power on: Switch to AUTO or SOUND.
3. Connect Bluetooth “DQ-M2” of the smart phone to play music.
4. Use correct method of the remote control to make sure the remote control is pointing at the infrared sensor.

Manual buttons description

1. One click for previous song / hold press for voice- ;
2. One click for next song / hold press for voice+ ;
3. Play mode: Click to switch music play by TF memory card or bluetooth device;
4. Starry sky mode: R&G – Green – Red – OFF
5. LED mode : R-G-B-W-RG-RB-RW-GB-GW-BW-RGB-RGW-GBW-RBW-RGBW-OFF
6. Power input: DC 5V (Micro USB)
7. TF memory card slot
8. Power ON/OFF: Switch to OFF AUTO SOUND

Statement
This product has been comprehensive and rigorous tested at the factory,the user should strictly follow the warning and instructions. Improper use resulting in product damage is not covered by the Company’s warranty.

Remote control function instruction

1. Play music

2. Stop music

3. Select to play music from bluetooth(smartphone) or from TF memory card

4. Pause

5. Previous song

6. Next song

7. Control device volume off

8. Control device Volume down

9. Control device Volume up

10. Click 1: Red&Green Starry sky; Click 2:Green Starry sky; Click 3: Red Starry sky; Click 4: Off

11.  Turn on light

12.  Turn off light
    (Note: The lamp has a memory function.If you turn off the light by remote,your previous setting will be saved,and it will show again when you turn it on by remote)

13. Single LED colors for choice: R – G – B – W

14. Double LED mix colors for choice: RG – RB – RW – GB – GW – BW

15. Triple LED mix colors for choice: RGB – RGW – GBW – RBW

16. 4 in 1 LED mix colors: RGBW
    (Note: There’re 15 options of LED color mode that can be match with 3 Starry sky mode, you can easily find out your favorite choice)

17. Sleep mode(motor stop)
    Press1: LED Blue+Starry sky Red+Starry sky Green Fade
    Press2: Starry sky Red+LED RGBW Fade
    Press3: Starry sky Green Fade+LED RGBW Fade

18. Auto mode

19. Sound Activated
    Press “sound mode” when playing music, LED wave and starry sky stars flashing following music. Press1:All lights strobe; Press2: Dynamic; Press3: LED strobe and starry sky appear at intervals.

20. Flash Mode

21. Adjust Brightness

22. Control Motor Speed

How to play music?

1. Play music from smartphone: Turn on bluetooth and search “DQ-M2” on smartphone or pad, touch “DQ-M2” to pairing.
2. Play music from TF card: Inset your TF memory card and click play mode.

Specification

• Power: 8W
• LED light source : 2 * 4 in 1
• Green Starry sky : 532 nm
• Red Starry sky : 650 nm
• Power Input: USB DC 5V
• Operating temperature: 14 F ~ 104 F (-10 C ~ 40 C)
• Projection Coverage: 161 ~ 538 ft (15~50 )
• Product Dimensions: 120x108x105mm

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>