italtecnica Brio 2000 Tank Flow Switch Instruction Manual
- October 27, 2023
- italtecnica
Table of Contents
2000 Tank Flow Switch
Instruction Manual
Brio 2000 Tank Flow Switch
- TARTS AND STOPS THE PUMP AUTOMATICALLY WHEN THE TAPS ARE OPENED AND CLOSED. PROTECTS AGAINST DRY OPERATION AND PUMP BLOCKAGE IN CASE OF PROLONGED NON-USE.
SAFETY INFORMATION
Installation reserved to specialised professionals
Disconnect the electrical power supply before all works
INSTALLATION WITH SUBMERSIBLE OR EXTERNAL PUMP
ALLOWED INSTALLATION POSITIONS
INSTALLATION WITH BYPASS FOR HIGH FLOW RATES
DO NOT
INSTALL IN TRAPS
ALLOWED CHECK-VALVE POSITIONS
SUCTION FILTER RECOMMENDED
USE ONLY WITH WATER, MAX SALINITY 0.05%
ELECTRICAL CONNECTION AND PROVISIONS FOR CABLES
CONNECTION TO THREE-PHASE PUMP THROUGH RELAY
WARRANTYTERMS
DO NOT INSTALL ANY ELECTRICAL DEVICES BETWEEN THE BRIO AND THE PUMP (FLOAT, ETC.)
NCREASE THE STARTING PRESSURE IF THE SYSTEM EXCEEDS 15 METRES (MAXIMUM 3.5 BAR = 35 METRES)
ELECTRONIC EQUIPMENTTO BE DISPOSED OF INACCORDANCE WITH NA TIONALREGULA
TIONS
THE MAXIMUM PRESSURE IS NOT ADJUSTABLE !!
** The maximum pressure corresponds to the pump head
DECOMMISSIONING – PERIODS OF NON-USE**
STOP DUE TO LACK OF WATER, MANUAL AUTOMATIC RESET
Check that the pump is not blocked
REMOVE JUMPER “A” TO DISABLE THE AUTOMATIC RESET AND JUMPER “B” FOR THE 24-HOUR ANTI-BLOCK
NOT SUITABLE FOR POOLS WITH PEOPLE IMMERSED
TECHNICAL DATA
| 115-230 V 50/60 Hz
---|---
1ph. – 12 A max.
IP 65
10 bar max.
5 ÷ 55 °C.
-10 ÷ 50 °C RH < 95 %
-10 ÷ 70 °C RH < 95 %
5 ÷ 45 °C RH < 85 %
ACTION TYPE: 1.C POLLUTION DEGREE: III OVERVOLTAGE CATEGORY: III BALL PRESSURE
TEST: 85°C
ELECTRONIC EQUIPMENTTO BE DISPOSED OF INACCORDANCE WITH NA TIONALREGULA TIONS
https://www.italtecnica.com/index.php?ip=2
I TALTECNICAsrl
V .LE EUROPA31 – 35020TRIBANO (PD) ITALY
T el. 00 +39 049 9585388
–www.italtecnica.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>