Guangzhou Jinghe Electronic Technology JH0414 LED Bluetooth Controller Instruction Manual
- June 6, 2024
- Guangzhou Jinghe Electronic Technology
Table of Contents
LED Bluetooth Controller
Instruction for connection of Smart Bluetooth controller
App installation
1: install APP: APP name: LED Random color
How to download
1.Scan QR code to install by phone: If you install the APP in APP Store or
Google Play, an user account is needed,
2. after the app installed then go to connect your phone with the bluetooth
lan
Firstly open your phone bluetooth, then power on your lamp. Secondly open t!
app, the app will connect the bluetooth lamp automatically. Please don’ t sear
the bluetooth on your phone setting by yourself, cause some phone OS don’
support manual search except some specific OS type and id doesn’t mean that
you can’ t use it by APP.
3.1f you can’ t connect it by APP
(1) Please check if the lamp is normally powered on.
(2) Please check if the bluetooth function is turned on on your phone
(3) Please check if there is another phone connected with the lamp already, if
in that
situation please disconnect it first. Because bluetooth 4.0 can only support
one to
many connection, don’ t support many to many connection.
(4) Please check if you connect it on phone setting by yourself, if it is the
situation,
please disconnect it and close the APP, then open APP to connect it
automatically.
(5) Close the APP, restart your phone, repower your lamp and reopen your
APP for a reconnecting.
1.Color control panel
Color control panel includes color wheel and
custom color setting. You can add a custom
color by one touch and delete it by long press
on custom color setting area. You can also set
brightness by the brightness menu bar.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help. Caution: Any changes or modifications to this device not
explicitly approved by manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction.