WYMECT YM-UD23 5-in-1 Wireless Charging Station User Manual

5 in 1 Wireless Charging Station

User Manual
Magnetic Wireless Charging Stand for iPhone 12/13 Series Only

Product Introduction

This is a multifunctional 5 in 1 magnetic wireless charging station that can fast magnet charge you’re for iPhone 12/13 series and simultaneously boosts up the Apple watch 1/2/3/4/5/6/7, Airpods Pro/2, and supported all Qi-enabled devices.
In addition, we also designed with nightlight and USB output, which frees you from daily plug and pull hassles, let the wireless devices guide you to an easier life.
The product is designed with the magnetic double coil , you could place the phone vertically or horizontally without affecting charging, and watch your favorite TV show, movies while charging.

Product Details

1. Requires Type C & QC 3.0 fast charging adapter when charging 3 devices with nigh lamp simultaneously or want to have a fast charging effect. We recommend that the input power must supply up to 18W, otherwise it my cause multiple devices to charge insufficient or unstable.
2. The base if the wireless charging station provides up to 15W fast charging, USB output provides up to 10W (max ), all qi enabled magnetic phone charging supports 5W/7.5W/10W/15W. However, 7.5W standard for iPhone12/13 series and 3W stander for Apple watch.
3. The night lamp supports 3-level of brightness adjustable by touch control, short single touch turn on the light, and then from neutral light, warm light and more warmer light and off 4 states cycled. The fourth press to turn off night lamp.
4. 0nly compatible with magnetic enabled cases for magnetic attachment to charge wirelessly.

Product Specification

Safety Tips

Please read the instructions carefully before using the product, so that it can be used correctly and store properly.

1. Do not disassemble the product or change the actual use of the product without authorization.
2. Keep away from water or other liquids which may lead to short circuits when using the products.
3. Please use the product in the temperature range of -10 C -45 C . Do not use the product near the fire source or under sunlight.
4. For safety, please place the product away from children.
5. Please do not place magnetic cards, magnetic stripe media, and precision machinery too close to the device. Not for the Otterbox Commuter case.

FCC Information
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for   Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or  elevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Made in China

Documents / Resources

| WYMECT YM-UD23 5-in-1 Wireless Charging Station [pdf] User Manual
YM-UD23, YMUD23, 2A4N3-YM-UD23, 2A4N3YMUD23, YM-UD23 5-in-1 Wireless Charging Station, 5-in-1 Wireless Charging Station
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>