OPUMP LM-B001 Smart Breathing Trainer Instruction Manual
- June 6, 2024
- OPUMP
Table of Contents
LM-B001 Smart Breathing Trainer
Instruction Manual
For more information, please visit: https://theopump.com/
Customer service: service@theopump.com
SMART BREATHING TRAINER
Model: LM-B001
POWERED BY Light &Move TECH
THANK YOU
FOR CHOOSING
Register on the Website to get
Package List
Important Safety Guidelines
Read all instructions before using the Breathing Trainer.
When using electrical appliances, basic safety precautions should always be
followed, including the following:
- Read all instructions carefully before using this product. Retain this user manual for future reference.
- The appearance is different from the actual product, please refer to the actual product.
Warning:
- Keep the device and accessories dry. Do not use heating products such as microwave ovens or hairdryers to dry the device and accessories.
- DO NOT let the device drop, hit, or be stricken heavily.
- Turn off the device before cleaning.
- DO NOT wash or clean the device with strong chemical reagents or strong detergents. Clean the dust with a cotton swab or a soft cloth.
- DO NOT tamper, disassemble, or attempt to repair the device. If there is a need to alter or repair, please contact our customer service team.
- DO NOT use the device in a place where no wireless device is allowed.
- Oral pressure occurs while using the breathing trainer, which may affect implanted and personal medical devices, such as pacemakers, cochlear implants, hearing-aid. Please consult your doctor before using if implanted any medical device.
- DO NOT use the device in dust, damp, dirty or magnetic places to avoid circuit failure.
- Use the device at a temperature between 5°C to 45°C. Too low or too high a temperature may cause device failure.
- DO NOT place the device and accessories near heat or fire, such as the electric heater, microwave oven, etc.
- Keep the device and accessories out of reach of children.
- DO NOT keep the device in a damp place to avoid device failure.
Specifications
| Product Name: | Smart Breathing Trainer |
|---|---|
| Model: | LM-B001 |
| Measuring Range: | 0ml-4500ml |
| Battery Capacity: | 400mAh |
| Battery Type: | Lithium battery |
| Battery Life: | 15 hrs |
| Charging Input: | 5V 1A |
| Charging Time: | 2hrs |
| Dimensions: | 35×35×136mm |
| Weight: | 100g |
| Material: | ABS Plastic |
| Connection: | Bluetooth 4.0 |
| Display: | LED Lights |
Getting to Know
Your Smart Breathing Trainer
Smart Breathing Trainer For Maintaining and Improving Inspiratory Volume and
Respiratory Fitness
Product Diagram
- Flow Rate LED
- Flow Volume LED
- Power/Bluetooth LED
- Charging Port
- Power Switch
- Air Hole
- Air Inlet
Indicator Light Instructions
| Power LED | Status | Light Effect |
|---|---|---|
| Work | Power on | Always on |
| Bluetooth connected | Short flash, and then on | |
| Low battery | Intermittent flash | |
| Charging | Charging | Slow flash |
| Fully charged | Always on |
Using Your Breathing Trainer
Off-line Operation
-
Press the power switch for 2s, and the power LED on.
-
Attach the mouthpiece to the air hole of the trainer, or attach the mouthpiece to the extension tube, and attach the tube to the trainer according to your own need.
-
Hold the trainer. Exhale normally. Then place lips tightly around the mouthpiece.
-
Inhale slowly to raise the Flow Volume LED. For:
(a) Vital Capacity test: slowly inhale, and try to raise the Flow Volume LED as high as possible. When inhalation is complete, remove the mouthpiece, and exhale normally.
(b) Breathing Trainer: slowly inhale, and maintain the Flow Rate LED in the ” Best ” flow range. Try to raise the Flow Volume LED to a specified volume level. When inhalation is complete, remove the mouthpiece, hold the breath as specified, and exhale normally. Reset and repeat trainer. ( Frequency of use and recommended inspiratory volumes should be set according to your own situation at the direction of training courses, your coach, physician, or therapist. ) -
To shut down the trainer, press the power switch for 2s and the power LED off.
Note: DO NOT block air inlet of the breathing trainer during use.
2. Online Operation Connect to the App)
-
App Installation
Search “OPUMP” in the Android Application Market, the iOS App Store, the HUAWEI Application Market to download and install the App. App downloaded via other channels may be unusable. Before pairing it with your equipment, make sure your equipment meets the following requirements:
iPhone 5S and above with iOS 10.0 and above system;
Android 5.0 and above with Bluetooth 4.0
https://theopump.com/pages/download-app -
Connect to the Breathing Trainer via Bluetooth
Open the OPUMP App and Bluetooth of the phone, follow the instruction of the App to register/login and connect to the trainer. -
OPUMP App
OPUMP App provides different courses and vital capacity tests. You can set goals, take the courses, and record the training.
Care & Maintenance
The unit should be cleaned after every use.
-Clean the trainer with the cotton swab;
– Rinse the mouthpiece and extension tube and shake dry
Never immerse the trainer in water or any other liquid.
Note: Mouthpiece and Extension Tube: Single Person Use Only.
Warranty
Thank you for purchasing OPUMP products. This product is guaranteed for one
year from the date of purchase. By registering your product on our website
(https://theopump.com/), the warranty period can be extended to 24 months.
If you encounter any problems, please contact us by the following way, and
attach your order number and detailed information about the problem. Under
normal circumstances, we will contact you within one working day. Website:
https://theopump.com/ After-sales email:
service@theopump.com Please read the User Guide
carefully and use it strictly according to the user guide. This warranty does
not cover product damage caused by normal wear, scratches, improper use
failure to follow the instructions in the User Manual, or use for commercial
purposes. For products purchased from retailers and distributors, please
contact the corresponding retailers and distributors to provide you with the
corresponding after-sales service.
*Predictive Nomogram Inspiratory Capacity (ml)****
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>