KaTom 450-FN354 Vacuum Thermal Carafe User Guide
- June 6, 2024
- KaTom
Table of Contents
450-FN354 Vacuum Thermal Carafe
CARE AND USE GUIDE VACUUM INSULATED STAINLESS STEEL CARAFE
GENERAL CARE
· Before first use, and as soon as possible after each use, rinse all parts with
warm, soapy water. Rinse thoroughly with fresh water and allow time to dry.
Store with stopper off.
· Contents should not be left in the container for longer than 24 hours. As soon as
possible after each and every use, wash all parts with warm, soapy water. Rinse
all parts thoroughly with clean water. Allow all parts to dry completely prior to
next use or storage.
· DO NOT use abrasive cleaners or scrubbers to clean outside of product since
they may dull finish.
· DO NOT use bleach or cleaners containing chlorine on any parts of product.
· HANDWASH ONLY – this product is not dishwasher safe.
· DO NOT immerse or soak in water for prolonged periods of time. Residual
liquids, foods, or other contents may become trapped between product
components, such as lid parts, container parts, gaskets (flexible band around
lid and/or stopper), or straws (if present in the product). Hand washing is
recommended to ensure that all parts of the product are thoroughly cleaned.
· For maximum thermal efficiency, preheat or pre-chill the product just prior to
use. Fill with hot/cold tap water, attach lid, let stand 5 to 10 minutes and empty
water. After filling container with contents, re-cover with lid to increase thermal
efficiency. Never use a microwave, conventional oven, or other heat source for
this purpose.
A
PUSH-LEVER LID (IF PRESENT):
1. Remove lid (A) by twisting counterclockwise. A
A1
2. Wash all parts separately, then
re-assemble. See General
Care section above for
washing instructions.
a. Ensure gaskets (if present)
A2
B
are properly seated to
minimize leaking.
3. Fill container with contents.
Do not overfill: Leave space
for the lid (A) to avoid overflow.
4. Replace lid (A) by twisting
clockwise. Depress the push-
lever (A1) 2 to 3 times to
release pressure.
5. To pour, securely grip handle (B) and press push-lever (A1).
6. Tilt product and pour contents through spout (A2).
7. Bring product to an upright position and release push-lever (A1) to close.
HINGED LID (IF PRESENT):
1. Lift lid (A) by pressing
on the hinge lever (A1).
2. Wash all parts.
A2
See General Care
section above for
washing instructions.
3. Before filling, open lid (A)
all the way. Fill container
with contents.
a. Do not overfill: Leave
space for the lid (A)
to avoid overflow.
A
A1 B
Image for reference only: Actual product may vary.
60
4. To pour, securely grip handle (B) and press and hold hinge lever (A1).
Hinge lever (A1) must be held while pouring to ensure easy flow of contents.
5. Tilt product and pour contents through spout (A2). 6. Bring product to an
upright position and release hinge lever (A1). 7. To close, press down on the
lid (A) into the lid opening until the lid (A) is secure
a. Hinge lever (A1) may need to be adjusted to better align the lid and lid
opening.
EN
GENERAL CARE
· Before first use, and as soon as possible after each use, rinse all parts with
warm, soapy water. Rinse thoroughly with fresh water and allow time to dry.
Store with stopper off.
· Contents should not be left in the container for longer than 24 hours. As soon as
possible after each and every use, wash all parts with warm, soapy water. Rinse
all parts thoroughly with clean water. Allow all parts to dry completely prior to
next use or storage.
· DO NOT use abrasive cleaners or scrubbers to clean outside of product since
they may dull finish.
· DO NOT use bleach or cleaners containing chlorine on any parts of product.
· HANDWASH ONLY – this product is not dishwasher safe.
· DO NOT immerse or soak in water for prolonged periods of time. Residual
liquids, foods, or other contents may become trapped between product
components, such as lid parts, container parts, gaskets (flexible band around
lid and/or stopper), or straws (if present in the product). Hand washing is
recommended to ensure that all parts of the product are thoroughly cleaned.
· For maximum thermal efficiency, preheat or pre-chill the product just prior to
use. Fill with hot/cold tap water, attach lid, let stand 5 to 10 minutes and empty
water. After filling container with contents, re-cover with lid to increase thermal
efficiency. Never use a microwave, conventional oven, or other heat source for
this purpose.
A
PUSH-LEVER LID (IF PRESENT):
1. Remove lid (A) by twisting counterclockwise. A
A1
2. Wash all parts separately, then
re-assemble. See General
Care section above for
washing instructions.
a. Ensure gaskets (if present)
A2
B
are properly seated to
minimize leaking.
3. Fill container with contents.
Do not overfill: Leave space
for the lid (A) to avoid overflow.
4. Replace lid (A) by twisting
clockwise. Depress the push-
lever (A1) 2 to 3 times to
release pressure.
5. To pour, securely grip handle (B) and press push-lever (A1).
6. Tilt product and pour contents through spout (A2).
7. Bring product to an upright position and release push-lever (A1) to close.
Each carafe contains an insert that fully covers the General Care & Instructions as well as the Limited Warranty.