Zhejiang H R Industry Trade YRNH2011 Bluetooth Selfie Stick User Manual
- June 6, 2024
- Zhejiang H R Industry Trade
Table of Contents
ONNTR295Manual
Bluetooth name: SelfieCom.
Boot mode: long press for 3 seconds to boot, the blue light flashes.
Shutdown mode: long press for three seconds to shut down, and the blue
light goes out.
No pairing link status: indicator light flashes blue
Standby state: After power on, it will flash for 1 second after 5 minutes
without pairing connection and shut down
Paired connection status: After pairing and connection, the indicator
light goes out, 10 minutes without operation enters sleep, after another 10
minutes without operation, it will automatically shut down.
Take a photo: Short press the photo, and the blue light flashes.
Sleep state: In the sleep state, short-circuit the camera button, the
camera indicator flashes for 4 seconds, and enters the unpaired connection
state.
Selfie stick product description:
For cameras/mobile phones
Material: Aluminum alloy
Selfie stick product specifications:
Maximum height: 1000mm
Minimum height: 340mm
Pipe diameter: 10-22 ∅
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by Zhejiang H&R Industry And Trade Co., Ltd may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure statement:
The transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter. This equipment complies with the FCC RF
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 5mm
between the radiator and any part of your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>