RIKI TALL 5X Vanity Mirror Instructions
- June 6, 2024
- RIKI TALL
Table of Contents
5X Vanity Mirror
Instruction Manual
Assemble your mirror into the stand
Power up!
NEED SOME HELP?
Email us at help@rikilovesriki.com
WANT TO SAY HI AND HAVE FUN?
rikilovesriki
Learn the controls
Learn the remote control
- The power for the Bluetooth is independent of the power for the mirror. Power off the Bluetooth by pressing and holding the Bluetooth button for five (5) Seconds.
- On Android phones, enable the volume button to take pictures.
Take the best selfies on the planet!
-
Place your iOS or Android phone into the
Magnetic Phone Clip cradle -
Become familiar with the locations of the magnets behind the mirror as indicated
Magnet location -
Choose to mount your Phone Clip onto the position A, B, C or
-
Power on the Bluetooth by pressing and holding the button on the remote for five seconds while pointing at the sensor described in instruction 3.
-
Pair your phone in your Bluetooth settings
-
Open your camera app
-
Press the button to take your selfie
See the details with the magnifying mirror
-
Become familiar with the locations of the magnets behind the mirror as indicated
Magnet location -
Choose to mount your Magnifying Mirror onto a position A,B, or C.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil num’érique de la classe B est conforme à la norme NMB-003 du
Canada.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency, and energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the received is connected. (4) Consult the dealer or an experienced radio TV technician for help.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
RIKI LOVES RIKITM and is a trademark of GLAMC0Fi GLOBAL LLC
www.rikilovesriki.com
Copyright 2021. All rights reserved. Made in China.
US and foreign patents are pending.
Documents / Resources
| RIKI
TALL 5X Vanity
Mirror
[pdf] Instructions
TALL, 2AUHN-TALL, 2AUHNTALL, 5X Vanity Mirror, 5X, Vanity Mirror
---|---