Gt Tronics Hk MINIWKB Wireless Mini Keyboard User Guide
- June 5, 2024
- Gt Tronics Hk
Table of Contents
Gt Tronics Hk MINIWKB Wireless Mini Keyboard
Introduction
Product overview
Touchpad
This product was added to the innovative function On the mouse wheel, when you
press the Fn button With your fingers Touch anywhere in the sliding the region
can facilitate the realization of the mouse wheel functions. This human design
can be easier to browse the web better, and edit documents.
Connecting the receiver
Slide the receiver out from the side of the keyboard, and insert it into the
devices with a standard USB interface. Once connected, slide the power switch
to the “ON” position located on the left side of the unit to establish the
connection.
Auto sleep and wake feature
The keyboard also features an auto sleep and auto wake mode. If there is a
long period of inactivity, the keyboard will automatically go into sleep mode.
During the sleep mode, the user can wake the unit up by pressing any key. The
2.4 GHz receiver and keyboard’s RF indicator will continue to flash and will
not power down.
Switching off the keyboard after use
After finishing using the keyboard, push the switch to the off position. This
turns off the power, of the keyboard. The USB receiver should be plugged out
from the PC and then inserted back into the keyboard so it is being kept
safely.
Charging the battery(Only for Configure A)
For the device with a built-in lithium-ion battery, please use only approved data lines and chargers. Fully charge the unit before operating it for the first time. This device can be used when charging but will extend the charging time; When the battery is low, the low-voltage light will flash to warn the user. The unit will automatically turn off if the battery has been depleted.
Notes:
This product has the configuration of A and B configuration can choose
Configure A:
lithium battery version, this version built in rechargeable lithium battery,
additional charge USB line.
Configure B
Install AAA 2 battery, this version does not support the charging function.
LED Backlight (optional)
Fn+F2-3-Color LED Backlit & Backlight (optional)
Appendix Technical parameters Specification
- Measurements (Lx Wx H): 146.8 x 97.5 x 19mm
- Weight (grams): 110g
- Operational Range: up to 10 meters
- Transmit power:+5db Max.
- Operation voltage: 3.3V
- Operation current: < 50mA
- Charging current: <300mA
- Sleep current: 1mA
Computer system requirements
- Windows 2000
- Windows XP
- Windows Vista ,Windows CE, Windows 7
- Linux(Debian-3.1,Redhat-9.0 Ubuntu-8.10 Fedora-7.0 tested)
Maintenance
- Do not attempt to disassemble the device or replace the rechargeable battery. Doing so will void the warranty.
- The battery will discharge if stored for a long period of time without usage.
- Use the specified charger. Disconnect the device after the battery has been fully charged. Overcharging the battery will shorten the life span of the battery.
- Do not expose the device to extreme heat or cold. Extreme temperatures will cause the life span of the battery to shorten.
- Use only a damp cloth with mild soap to clean the device. Solvents and other cleaning agents may cause damage to the device.
Troubleshooting
Below are some basic troubleshooting scenarios for the device. Please contact support from the place of purchase if you are unable to resolve any issues with the device.
Notes:
In line with the policy of continued development The manufacturer reserves the
right to amend the specifications without prior notification, The pictures and
date in the stylebook is consulted only, If there is fluctuation, According to
the real object, please. Since devices using 2.4G technology communicate using
radio waves, your device, and the other devices do not need to be in a direct
line of sight. The connection can be subject to interference from
obstructions, such as walls, or other electronic devices.
FCC STATEMENT
ID B40-MINIWKB ICID: 21698-MINIWKB
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes:
- l’appareil ne doit pas produire de brouillage, et
- l’utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.