OKLOK BIRD1 B1 Helmet Lock Mount Instructions
- June 5, 2024
- OKLOK
Table of Contents
Instructions
Preface
Dear Customer, thank you for buying our smart lock. In order to experience our product better, please read the manual carefully. Wish you a pleasant experience.
APP
Kindly Remind: Please input “ OKLOK ”in Google Playstore (Android) or APP Store(IOS) to download the APP.
https://app.oklok.com.cn/app.html?id
Register
Registering by E-mail address: Click Register-Input E-mail address-Get
verification code-Set password-Log in
Kindly Remind：
If the email box does not receive the verification code, please wait 1-3
minutes, there may be a network delay, and check whether the mail is sent to
the junk mailbox. Because [email protected] is the
address of the mailbox that is often used for registration and reset, May be
defined as an ad mailbox, which can be found in the junk mailbox.
Homepage Introduction
Add Lock:
Please wake up the Bluetooth signal before unlocking * (red light flashes when
the device is working)
Press the button to wake up the Bluetooth signal for the Bluetooth lock
Touch the button to wake up the Bluetooth signal for fingerprint lock
Detail of the lock:
Fingerprint setting:
Only the administrator has authority, the administrator
The default is the first user to bind the lock
You can unlock by fingerprint after registering your fingerprint successfully.
The red light indicates an unlocked fail.Please try again!
Device Record
My Friends list
Your friend must want to download the APP and register an account.
Personal Center
Attention
Q1: How to download the app.
A1: If you receive the product, In order for you to use the latest
features of this Smart lock, It is recommended to search for “OKLOK” in google
play or the app store to download the latest version of the software.
This is perfect to use.
Q2: Currently only registered accounts are allowed to register via email.
Enter the email address to get the verification code.
A2: Please connect to the network (WiFi or cellular network), restart the
software, and try again.
Q3: If the verification code is sent successfully, the mailbox will not
receive the verification code.
A3: Because [email protected] is the address of the
mailbox that is often used for registration and reset, it May is defined as an
ad mailbox, which can be found in the junk mailbox
Q4: After installing the app, you need to get camera permissions and get
the location.
Get contacts, etc.
A4: This is a normal prompt. It can also be disabled. Scanning the QR
code requires camera permission. Unlocking will record the time, and sharing
it with friends will get the contact.
Q5: After the fingerprint is successfully registered, the fingerprint
cannot be locked.
A5: When registering, please use the same thumb to take 6 fingerprints
according to the prompt.
Q6: How long does this battery last?
A6: This lock is a low-power 3C product. You must touch the fingerprint
head with your thumb before unlocking. Activate BT and devices, After the lock
is completed, it will enter the sleep state within 3-5s.
Warning
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.