Shenzhen Lanbon Hi Tech L8C Smart Watch Instruction Manual

Shenzhen Lanbon Hi Tech L8C Smart Watch

PRODUCT INTRODUCTION

Smart switch LSC smart Living system is extendable and switchable by WiFi MESH technologies together. It perfectly covers every single corner of your house, hotel, office etc. LSC is the best choice for your smart living due to it’s stability, reliability and easy installation with it’s fabulous features.

PRODUCT PARAMETERS

LBC Smart switch

• Size: 85x 85x 32mm/120x 7 4 x 32mm
• Weight: 0.3kg
• Packing box size: 141 x1Q3x47mm
• Panel: Tempered Crystal Glass
• Bottom Materials: Retardant PC
• Rated vo ltage: AC 100-250V 50/60Hz
• Wireless standards: IEEE 802. 11 b/g/n
• Frequency range: 2412MHz~2462MHz
• Receiving sensitivity: -97dBm@250kbps
• Operating temperature: -25 °C +60 °C
• Relative humidity: <95%

HOW TO OPEN THW SWITCH PANEL

INSIDE OF THE PRODUCT

PRODUCT INSTALLATION DIAGRAM

1. Disconnect the power supply and wire according to the wiring diagram.
2. Put the switch into the installation box and tighten the screws to fix it.
3. 4. 5. Cover the panel, power on

NETWORK INDICATOR

HOW TO ADD MORE SWITCHES (MESH NETWORK)

PRODUCT WIRING DIAGRAM

HOW TO DOWNLOAD SMART LIVING APP

HOW TO REGISTER AN ACCOUNT

CONFIGURE SWITCHES TO SMART LIVING APP (NOTE: THIS STEP SHOULD BE AFTER

ACCOUNT REFGISTRATION)

HOW TO SET THE SWITCH TO ONLY ALLOW WORK AT A FIXED PREIOD OF TIME, AND IT WILL AUTOMATICALLY TURN OFF AFTER THE TIME EXPIRES ( THIS SETTING WILL BE EFFECTIVE FOR A LONG TIME)

HOW TO TIMER SETTING

How to check power statistic

What should I do if the button backlight is too bright and affects sleep?

How to change the backli ht color of the buttons to your favorite color

?

How to change the button backlight mode?

How to change the Icon and Name

Factory reset to restore default settings

How to connect Google home

How to connect Alexa

Product size

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. Th e device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>