THINK RIDER HW702 ANT + & BLE Heart Rate Armband User Manual
- June 5, 2024
- THINK RIDER
Table of Contents
HW702 ANT + & BLE Heart Rate Armband
USER MANUAL
ANT+ & BLE Heart rate armband Version: V.
1. Product Introduction
Thank you for purchasing our ANT+ & BLE heart rate armband, this product is one of the heart rate monitors of our company, which transmits the real-time heart rate data through Bluetooth or ANT+ to heart rate receiving device, sports and health App, helping you to manage your exercise intensity scientifically. This user manual will help you to use the product better, please keep it for reference.(This product is for sport purposes only and it is not meant to replace any medical advice).
2. Product Accessories
3. Basic Parameters
Product size: 46.78×34.58×11.58mm
Host weight: 10.5g
Power: Rechargeable lithium battery
Battery life: 20 hours for continuous heart rate monitoring
Water resistance: IP67 Working temperature: 0~45
Transmission: ANT+, BLE
4. Function and Operation
Turn-on: Press the start-up button, the LED light will flash blue quickly, indicating the heart rate searching. As the heart rate has been detected, the light will flash slowly.
Turn-off: Press the start-up button when not in use, the LED light will flash red quickly, then enter the shutdown state.
POWER:
a. When you press the start-up button,if the LED light flashes red several
times. It shows that the battery is low and need to be charged;
b.The LED light will flash red and green alternately while charging. After
full charge the LED will show green continuously;
REAR VIEW
Wearing: Wear armband on the upper portion of the forearm. Sensor should be on the inside or top of forearm. It should be worn snug enough not to move on your arm, but NOT so tight that it restricts arm circulation.
Initial Setup with Bluetooth Smart Fitness Apps
- Set Bluetooth on the device to ON.
- Find the Sensor Settings menu in the Bluetooth Smart Fitness App.
- Connect the this device armband by turning it on.
Initial Setup with Bluetooth Smart devices
(Sports Watches ,Fitness Equipment & GYM Team Training System.)
- From the device settings menu select “Add HR sensor”
- Connect the this device armband by turning it on.
Compatible Apps MooFit, Wahoo Fitness, Strava, Runtastic.
5. Disclaimer
- The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
- We shall not bare any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product.