PARTIER 1004 Modular Moving Light Portable Bluetooth Speakers User Guide

PARTIER 1004 Modular Moving Light Portable Bluetooth Speakers User Guide

What’s in the box

M button

Buttons

Main body LED button

• Main body Equalizer LED height control: LED Height can be set by your phone volume (Recommend: Set your phone volume to Maximum)

Connections

Bluetooth Connection

Bluetooth New Connection

Recommendation for Robot Arm and Main body LED

ECO mode(only Speaker)

Multi-connection

Step 1. Power on Speaker A and B

Step 2. Connect Speaker A and B

Double-click the 2 PARTIER Power button to start pairing at the same time. And the power buttons on both speakers flash quickly. After about 10 seconds, you can hear a beep from 2 speakers

Step 3. Search Bluetooth signal name ‘RNS-Partier’

Warning

Specification

• Speaker unit 2.75 inch

• Bluetooth version 5.0 (BR + EDR )

• Output BLUETOOTH Specification Power Class 1

• Communication range: Line of sight approx. 10 m

• Compatible BLUETOOTH Profiles: A2DP / AVRCP / HSP / HFP / SPP

• Supported Codec: SBC

• Frequency response: 50Hz ~ 15kHz

• Signal-to-noise ratio: ≥ 90dB

• Battery type: Lithium-ion polymer(7.4V, 2,200mAh)

• Battery charge time: 2.5 hours @ 5V 2.5A (Support QC3.0 charger)

• Music playing time:
  approx. 23 hours(ECO mode)
  approx. 3 hours(All functions)
  varies by volume level and audio content

• Bluetooth transmitter power: 0 ~ 9dBm

• Bluetooth transmitter frequency range: 2.402 ~ 2.480GHz

• Bluetooth transmitter modulation: GFSK, π/4-DQPSK

• Dimensions (H x W x D): 287 x 140 x 140(mm)

• Weight: approx. 1.38 kg

• Power Adapter: DC 5V 2.5A or DC 9V 2A or 12V/1.5A (AC 100 V – 240 V, 50 Hz/60 Hz, 0.5A)

Appx. Therapy Mood Light / Star Mood Light / Flame Mood Light

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>