Shenzhen Yixiu Technology ZY01LX Wii Game Wireless Controller User Guide
- June 5, 2024
- Shenzhen Yixiu Technology
Table of Contents
Remote for Wii
User Guide
Product features
- Compatible with Wii and Wii U consoles.
- Wireless Bluetooth connection with controlling distance up to 8m.
- Built-in COMS sensor for detecting infrared light from sensor bar,
obtaining light-spot moving info, provide
Bluetooth target movement info and support sensitivity switching function for the Wii console. - Built-in with a sound module to convey induction sound from Wii console to speaker.
- Built-in with a speaker for sound output.
- Built-in with a motor for providing vibration sensing feedback function.
- 2*AA dry batteries or battery packs are needed for the power supply.
- With an extension terminal for connecting nunchuck or other compatible peripheral devices.
Remote specification
| Item | Description |
|---|---|
| 13*Digital buttons | Front: Power, D-Pad (up, down, left, and right), A, [+], |
Home, [-], 1, and 2. Back: B and SYNC.
4Player LED| Display the player’s login sequence.
1Bluetooth| Connect remote and console through Bluetooth wireless
communication.
lCOMS sensor| Detect infrared light from sensor bar, obtain light-spot moving
info and provide Bluetooth target movement info. Support sensitivity switching
function for the console.
lSound module| Convert sample sound info from Wii console to speaker to
output sound.
1Tower supply| 2AA dry batteries or battery packs are needed for the power
supply.
lMotor| Provide vibration sensing feedback function.
lspeaker| For sound output.
Extension terminal| For connecting nunchuck and other compatible peripheral devices.
Connecting instruction
- First connect power supply for Wii console and also connect sensor bar and AV cable.
- Install 2*AA dry batteries in the remote.
- There is a red color code pair button “SYNC” on the back of the remote, press the SYNC button, the four LED indicators in the front of the remote will be blinking quickly (sufficient battery power is needed).
- Press the code pair button on the Wii console for code pair (after synchronization, the No. 1 LED indicator in the remote will be solid bright).
- Adjust the position of the sensor bar (position of the cursor).
- Read U-disk or DVD using the remote (Connect a nunchuck to the remote to read games).
Electrical performance specifications
| Working voltage | 2.5-3.0V |
|---|---|
| Working current | 60-130mA |
| Vibrating current | 80-190mA |
| Standby current | 0.6mA |
| Standby time | 5min |
| Sound distance range | <6m (under the condition without any obstacle block) |
| Cursor distance | <3m |
Operation supply current
( Ta = 0℃~70℃, VBATT=3.0V±5%, VSS=0V)
| Item | Characterization | Range |
|---|---|---|
| SYNC current consumption | Press SYNC searching for console | 80–120mA |
| POWER OFF current consumption | Power OFF | 500uA±100uA |
| POWER ON (Bluetooth connecting) current consumption | Power ON | 100mAt1 OmA |
| Low voltage 2.3V POWER OFF current consumption | Low voltage 2.3V Power OFF |
500uA±100uA
Low voltage 2.2V POWER ON (Bluetooth connecting) current consumption| Low
voltage 2.2V Power ON| 135mA±20mA
Connecting with Nunchuck’s current consumption| Connecting with Nunchuck|
100mAt1 OmA
Durative vibration current consumption| Durative vibrating| 150mA±30mA
Sound current consumption| During sound output| 80mA±20mA
Physical parameters
Dimension: 14936.833mm, net weight: 80g.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (I) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>