ZLINE MK-MWD Microwave Drawer Trim Kit Installation Guide
- June 5, 2024
- Zline
Table of Contents
Trim KiT
Installation Guide
ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath
of your dreams is never out of reach. Through our unique designs and
unparalleled quality, we’re dedicated to providing you with an elevated
experience in the heart of your home. With an endless selection of features
and finishes, our inspiration is your reality.
ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing
the highest-end luxury designs and professional features into everyone’s
homes. Because we continually strive to improve our products, we may change
specifications and designs without prior notice.
WARNING: This product can expose you to chemicals including nickel, which
is known to the State of California to cause cancer. For more information, go
to www.P65Warnings.ca.gov.
BEFORE INSTALLATION
TOOLS NEEDED:
- Air screwdriver
- Marker
TOOLS INCLUDED:
INSTALLATION
-
Install the support beams using the holes in the front bracket as a guide. Use th#1 screw.
-
Remove the screws holding the microwave in place in order to install the front bracket and rear bracket.
-
Use #2 screws to install the four buckles on the corresponding mounting holes around the trim kit.
-
Line up the trim kit with the buckle seats.
-
Push the microwave into the slot in the rear bracket by extending the support beam (Figure 1).
-
Use screw #3 to fix the front bracket and support beam (Figure 2).
-
Insert the trim kit into the corresponding buckle seat.
1-614-777-5004
contact@zlinekitchen.com
www.zlinekitchen.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>