FLEXTRONICS 52192780 Wireless Charging Pad Module User Manual
- June 5, 2024
- FLEXTRONICS
Table of Contents
Date: August 9, 2021
User Manual Information for Flex Wireless Charging Pad Module
Flex Automotive USA Inc
27755 Stansbury Blvd, Ste 300
Farmington Hills, MI 48334, USA
Vehicle Manual
The Flex product Wireless Charging Pad Module (WCPM) will be provided directly to the vehicle manufacturer and not to an end-user. The vehicle manufacturer will assemble the WCPM as part of the vehicle. Therefore, Flex will not be supplying an end-user manual. Flex has provided the following text to the vehicle suppliers for their consideration to be included in their vehicle’s manual.
FCC ID: 2AF5R-52192780
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To ensure compliance with FCC RF exposure requirements this device must be
installed to provide a minimum of 20cm between the device and people.
Vehicle Installation
The WCPM is permanently installed into the front center console area in an automotive vehicle and is only removable by a qualified service technician. The WCPM is not designed to be operated outside of the vehicle. The WPCM mounts on the backside of the A-surface using four screws and is designed to connect to the vehicle wire harness and draw power from the vehicle battery. LIN bus communications on the vehicle bus harness are required for the WPCM to operate.
27755 Stansbury St #300
Farmington Hills, MI 48334
USA | main: +1 248 853-5724