Omgomne 3405 1 Light Hanging Indoor Kitchen Island Pendant Lights Instruction Manual
- May 15, 2024
- Omgomne
Table of Contents
Omgomne 3405 1 Light Hanging Indoor Kitchen Island Pendant Lights
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE A CFL 10W, LED 6W bu lb types and wattages. Do not exceed recommended wattages
SKU:# 3405/3406/3407/3408D1 (Not included the bulb)
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 2 |
| G | Joint | 1 |
| H | Long Tube | 3 |
| I | Short Tube | 1 |
| J | Lip | 1 |
| K | Socket | 1 |
| L | Glass Shade | 1 |
| M | Socket Ring | 1 |
Hardware enclosed:
| Part | **** Description | QTY |
|---|---|---|
| A | Wire Connector | 3 |
| C | Mounting Screw | 2 |
Dear customer ,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Email: nikki@doraimilight.com
Any questions please free to contact us:
Step 1:
- Remove all parts and hardware from box along with all plastic protective packaging.
- Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate **(D).
**
Step 2:
- Secure Short Tube (I), Long Tube (H), Joint (G) into Lip (J) in order.
Step3:
- Gently pull the wire in the ceiling junction box and let the wire hang
- Attach Mounting Plate (D) to the junction box.
- Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver
Step4:
Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire,with the Wire Connector(A).
Steps:
- Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy Nuts(F).
Step6:
- Place Glass Shade(L) on Socket(K) and secure with Socket Ring(M).
install bulbs(not included) into the Socket(K).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>