HOOVER FVC66.01 S Electrical Freestanding Oven User Manual

: June 5, 2024
: Hoover

HOOVER FVC66.01 S Electrical Freestanding Oven

Our Esteemed Customer,
We take offering quality products more than your expectation as a goal, offers you the products produced in modern facilities carefully and particularly tested for quality.
Your manual is prepared in order to help you to use your apparatus that is manufactured by the most recent technology, with confidence and maximum effciency.
Before use of your apparatus, carefully read this guide that includes the basic information for right and safe installation, maintenance and use and contact to the nearest Authorized Service for mounting of your product.

PART 1 : PRESENTATION AND SIZES OF PRODUCT

Part of List

Cooktop Cover
Cooktop
Control Panel
Children lock
Oven Door Handle
Drawer Cover
Supply leg
Oven Door
Oven Tray
Wire Grid
Front rezistance
Fan store
Oven lamp
Hotplate

MODEL	SIZE(cm)
TE 66	606085 606090
TE 56	506085 506090

PART 2 : WARNINGS

TAKE ALL IMPORTANT SECURITY MEASURES AND READ THE MANUAL COMPLETELY BEFORE USING THE APPARATUS

This apparatus has been designed for non-professionel, domestic use only.
Surely control whether there is any damage after you unpacked the apparatus. If there is any defect; do not use the apparatus and immediately contact to the authorized maintenance service. As the materials used for package ( nylon, stapler, strafoam. . etc. ) may cause harmful effects to children, they should be collected and removed immediately.
The apparatus must be set up by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement.
Before connecting your apparatus to the electric , carefully control whether it is appropriate for the features determined on the package and/or data plate on the apparatus.
Compare the features of the electricity organization with the technical information on the presentation label before plugging the apparatus in.
The feeding cable must never be changed by the customer. When it is damaged by any reason, please contact to your authorized service.
Before changing the ovens lamp, plug it off.
Turn the apparatus off before the operations such as cleaning or maintenance. You can do it after plugging it off or turning the main switches off
Some parts of apparatus may hold its heat for a long time, it is required to wait for it to cool before touching onto the points that are exposed to the heat directly.
Do not keep flammable materials close while the apparatus is operating.
Pay attention to the cables of the other electrical devices operating near the apparatus, so as not to touch to hot points
Pay attention the switches to be 0, when the apparatus does not operate.
The glass covers that some models have may crack when they are exposed to extreme heat. Do not cover the glass cover without being sure that the cooker is off and cooled completely.
This manual is prepared for more than one model in common. Your apparatus may not have some of the features that is explained in manual. Pay attention to the expressions that have figures, while you are reading the operating manual.
Keep children away from the oven.
In case that cracks are visible and ceramic surfaces of the oven is to switch off immediately to prevent electrical shocks.
During the use the appliance gets hot. Take special care to prevent touching of heating elements inside oven cavity.
During grilling mode the oven door should be closed.
Do not use steam cleaners for cleaning the cooking hobs and oven cavity.
Before opening the lid covering the hotplates, take care that no liquids are on the top of the lid. The lid is to closed not earlier than hobs have been cooled down.
Take care that the lid is in correct position under operation.
In case that highlight-halogen heaters are installed as hob elements do not stare into the light.
In case that the oven will be placed on a socket steps must be resorted to prevent falling down of the oven from the socket.
FOR EFFICIENCY AND SECURITY OF APPARATUS, WE RECOMMEND YOU ALWAYS TO USE THE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED SERVICES WHEN IN CASE OF A NEED.

PART 3: INSTALLATION AND PREPARATION FOR USE

This modern, functional and practical oven, that was manufactured with the most quality parts and materials, will meet your needs in every respect. You must surely read this manual in order not to have any problem in future and to be able to have successfull results. The following information are the required rules for right installation and service processes. It must be read especially by the technician who will install the apparatus.
Contact to Authorized Service for mounting of your oven.

INSTALLATION OF OVEN

There are some factors that must be paid attention to while installing your oven. Surely pay attention to our below suggestions in order to be able to prevent any problems and/or dangerous situations that may occur later.
It can be placed close to other furniture on condition that in the area where the oven is set up, the furnitures height must not exceed the height of the cooker panel.
Pay attention not to place it near the refrigerator, there must be no flammable or in flammable materials such as curtain, waterproof cloth, … etc. that will begin to burn quickly, while selecting place for oven.
It is required there must be at least 2 cm blank space between the back cover of oven and wall for air circulation.
The furniture close to oven must be manufactured resistant to heat more than 50 C° of the room temperature.
If the kitchen furniture are higher than the pan which the ovens cookers are on, it must be at least 11 cm away from the ovens side.
The minimum heights from the ovens pan and wall cupboards and paddle boxes with fan over the oven, are shown as below. Thus, the paddle box must be at minimum 650 mm height from the cooker pan. If there is no paddle box, this height must not be less than 700 mm.

ADJUSTMENT OF FEET

Your oven stands on 4 adjustable feet. As the feet are adjusted in low location, it is required to control whether it is balanced before installing the oven. You can make this adjustment as turning the feet clockwise if required. It is possible to raise the apparatus maximum 15 mm via the feet. If the feet are adjusted appropriately, it is required not to move the apparatus by dragging, otherwise it is required to place it by lifting it up. It is required to bring the ovens drawer out to adjust the apparatuss feet. The feet can be adjusted from inside via the small change.

ELECTRIC CONNECTION AND SECURITY

During the electric connection, surely follow the instructions below.

The earthing cable must be connected to the terminal. You have to ensure the cable with insulation to be connected to the power source during the connection of cable. If there is not any appropriate earthed electric outlet in accordance with regulations in the place where the apparatus will be installed, immediately contact to our authorized service.
The earthed electric outlet must be close to the apparatus. Surely do not use the extension cord.
The feeding cable must not touch to the hot surface of the product.
In case the feeding cable is damaged, surely contact to Qualified Service. The cable must be changed by the authorized service.
The wrong electric connection may damage your apparatus. Such damage is not in guarantee extent.
The apparatus is adjusted as appropriate for 220-240 Volts and 400V 3N Volts of electricity. If the network electricity is different than this informed value, immediately contact to our authorized service.
The electric cable must not touch to the hot parts of apparatus. The electric cable must not touch the back part of the apparatus. Otherwise the electric cable of apparatus may be damaged. And this situation may cause short circuit.
The producer firm declares that it has no responsibility against any kind of damages and losses that emanate from the following security norms.
There is to install an all pole disconnector inside the supply circuit with a contact opening of at least 3.0mm rated 32A and delay functioning type.
The appliance is provided for fixed connection to the power supply. The connection of the appliance to an electrical source must be done by authorized technician.

GENERAL WARNINGS AND MEASURES

Your apparatus is produced in accordance with the related security instructions connected with electrical apparatus. The maintenance and repair works must be made just by the authorized service technician who is trained by the producer firm. The installation and repair works whitout following rules may endanger you.
Its outside surfaces heat while your apparatus operates. The interior surfaces of oven, components that ensures the heat and steam that goes out are quite hot. Even if the apparatus is turned off, these parts hold its heat for a specific time. Do not touch onto the hot surfaces. Keep children away.
Do not leave the cooker while cooking with solid or liquid oils. There may be flaming up on condition of extreme heating. Never pour water to the flames occuring from oil. Cover the saucepan or frypan with its cover in order to choke the flame that was occured in this case and turn the cooker off.
The oven and heat adjustment switches must be adjusted and ovens clock must be programmed for cooking in your oven. Otherwise the oven does not operate.
Do not leave anything on it when the door or drawer of oven is open. You may unbalance your apparatus or break the cover.
Do not put heavy things or flammable, burnable goods (nylon, plastic bag, paper, cloth . . . etc) into the lower drawer.
Plug it off when you do not use the apparatus and keep the gas valve off.
Protect your apparatus against atmospheric effects. Do not leave it to effcts such as sun, rain, snow, powder. . etc.

PART 4 : USE OF YOUR OVEN

GENERAL APPEARENCE AND TECHNICAL FEATURES OF YOUR OVEN

TE 56|
---|---
LOWER HEATER| 1000 WATT
UPPER HEATER| 1000 WATT
GRILL| 1600 WATT
TURBO HEATER| 2000 WATT
TE 66|
---|---
LOWER HEATER| 1100 WATT
UPPER HEATER| 1200 WATT
GRILL| 2000 WATT
TURBO HEATER| 2000 WATT

PRESENTATION AND FEATURES OF THE CONTROL PANELS

USE OF HOTPLATES AND VITROCERAN COOKERS

The electrical cooker is commanded by 7 graded switches. 0 of the grades is off location. The use fields in response to other 6 grades are below.

1……….Keeping hot location
2-3……Heating locations at low heat
4-5-6..Cooking – roasting and boiling

The upper part of hotplates is covered by a protective material resistant to heat. Turn the switch of the electrical cooker to 3 and then operate the cooker for 5 minutes in order to burn and so to toughen the protective layer at first use. During use of electrical cookers, it is required to pay attention to the used saucepans to have smooth bases. If appropriate sized and smooth based saucepans are used, you can get the most efficiency from your cooker. It is not suggested to use the little size saucepans on the big size cooker, because this will cause heat loss and so energy will be wasted.

Surely control that your cooker is off, the control switch is at 0 location after cooking. Also never touch it as the cooker will be hot for a speific time after it was turned off. Do not let children to come close to it. Clean the electrical cooker with a wet cloth after using the electrical cooker. If there is excessively getting dirty situation, you can clean it with water with detergent rather well. Heat for a few minutes for the upper part to dry after cleaning. If you will not use its upper part for a while, ensure to occur a thin oil layer as oiling with machine oil.

Dual or Oval Vitroceramic Cooker

Dual or vitroceramic cookers can heat in two different position. For operating the big diameter of dual cooker turn the switch to “ “. Both big and small diameter of the cooker will operate For operating the oval part of the oval cooker, turn the switch to .” “. Both oval and round parts will operate.

USE OF OVEN PART

Use of Electronical Programming Clock
Adjustment of Day Hour
A symbol will start to flash after it is connected to the electrical resource. Press (+) and (-) keys at the same time. It is also possible to adjust (to increase or to reduce ) the time by pressing to these keys.

Alarm / Time Setup
This function can be used as time set up and alarm when wished. Mode key must be pressed until “ “led indicator lamp will start to light. The wished period interval is adjusted via + and – keys. The wished time remains on screen after it was adjusted and “ ” sign that flashed in the past remains fixed. It is possiple to make time set up between 0-23.59 hours. At the end of cooking period an alarm is heard and “ “symbol flashes. You can press any key to stop the alarm.
Programming as Determining the Cooking Period
This function is used to adjust to cook at wished period interval. To adjust the cooking period, Mode key is pressed until Dur indicator lamp will start to flash. The wished cooking period is adjusted by using + and – keys. Once the time is adjusted, it is registered automatically in 5 seconds following the adjustment and A and” ” symbols start to light continuously. The screen returns to the current time. An alarm (sound) is heard when the cooking period ended and A and “ “symbols start to flash. Press onto any switch stops the signal and the lamp to flash. It is possible to adjust cooking period between 0-10 hours.

Programming as determining the Finish Time
This function is used to adjust finishtime of the cooking period. To adjust the finish time of cooking Mode key is pressed until End indicator lamp will start to flash. The wished finish time is adjusted by using + and – keys. When the finish time is reached an alarm is heard and you can press any kay to stop the alarm.
Programming as determining the Cooking Period and Finish Time
This function is used to adjust the cooking period by using of automatically cooking function. Both cooking period and ending time have to be adjusted to adjust the ending of cooking period. The cooking period is adjusted as determined above. Mode key was pressed until End indicator lamp will flash in order to adjust the ending time. + and – keys must be used at the end of wished cooking period. Once the time is adjusted , it is registered automatically in 5 seconds following the adjustment and A and “ “symbols starts to light continuously. The screen returns to the current time. An alarm sound is heard at the end of the time and A symbol starts to flash. Pressing any switch stops the signal and lamp to flash.

Use of Mechanical Timer

Manual Operation
When you set the timer 20 knob to M position as seen in the illustration on left side, the oven can be operated continuously. The oven70 60 can never be operated, when the timer knob is in 0 position.

Operation with time
set Turn the timer knob in clockwise direction in M order to set time between 0-100 minutes as seen 100 in figure on right side. 90 When the adjusted time 80 ends, oven is turned off and a single warning sound is heard.

Use of Oven Function Switches

This switch allows you to select the oven functions. The functions and their grades are shown at the following table. Also, the detailed instructions and their uses will also be explained in details in the next pages.

| Your oven’s lamp starts to operating.
---|---
| Your oven’s lamp, red warning lamp and fan start to operating. It performs the function of defrosting your frozen food.
| Your oven’s thermostat and warning lamps and turbo heater, fan are put into use.
| Your oven’s thermostat and warning lamps and turbo heater, fan are put into use.
| Your oven’s thermostat and warning lamps and fan, upper and lower heaters start operating.
| Your oven’s thermostat and warning lamps and grill heater and chicken turning function start operating.
| Your oven’s thermostat and warning lamps and upper heater, grill heater and chicken turning functions start operating.
| Your oven’s thermostat and warning lamps and upper heater, grill heater and chicken turning and fan functions start operating.
| Your oven’s thermostat and lamps, lower heater operate
| Your oven’s thermostat and warning lamps, turbo heater, lower heater and fan start operating.
| Your oven’sthermostat and warning lamps,lower heater and start operating.

Ice Melter Function ( Defrost )
You can start the defrosting process by placing the frozen food into your oven and turning the switch onto the determined sign. This is a program that does not cook the food, just helps to defrost them in a very short time. Place the food that will be defrosted on the third shelf support from the bottom, on a wire shelf. Place a tray into the bottom of the oven in order to collect the water that occurs because of defrosting.
Lower – Upper Heater Function ( Static Cooking )
At this cooking that is defined as the traditional method, the heat that is spreaded from the lower and upper heating elements into your oven equally, ensures the foods buttom and top to be cooked equally.
It is recommended to make pre heating for 10 minutes. Leave the food that was put into the available cooking dish to be cooked in recommended period case. The Lower-Upper Heater location is the function that is preferred to cook cake, sponge cake, flan, spaghetti in oven, lasagna, pizza. At the end of cooking process, turn the ovens switch and heat set up switch off and cancel the time program. Take the cooked food from the oven, put onto a safe place and open the ovens door and ensure the oven is cool completely. As the oven will be hot at that moment, stay away from the oven and keep your children away from the oven.
Fan and Lower – Upper Heater Function ( Static Cooking with Fan)
The location where the air comes from lower and upper heating elements is distributed into the oven via the fan motor and fanner. The heat adjsutment switch is adjusted to the degree that is recommended at the cooking table. Turn the ovens switch as it will show the symbol of this function and the ovens time is adjusted to the recommended time for cooking, the oven is pre heated for 10 minutes. The food that had been put into the available cooking dish is placed into the oven and then cooked. In general, this location is a location where a very nice results are taken for cooking of pastries. Every part of the food will be cooked equally at this location. It is appropriate for cooking of single tray. At the end of cooking, turn off the ovens switch and heat adjustment switch. Cancel the ovens time program and take the cooked food from oven and leave it on a safe place. Open your ovens lid and leave it to cool. Do not come close to it until it cools and keep children away.

Turbo Fan Function
Turbo fan function spreads the ovens heat equally. The food on all shelves will be cooked equally during the use of this function. Top of the oven will not be hotter than the bottom of it. Adjust the heat adjustment switch of your oven to the wished degree, also turn the function switch as it will show Turbo function symbol. Place your food that had been put into the available cooking dishes into the oven after pre heating of 10 minutes. This function is appropriate for cooking more than one dish. If you have two trays of food that you will cook in your oven; you must use that heat for your oven, heat of which of the heats that are appropriate for your food while adjusting the cooking heat. Cooking two trays of food requires additional cooking period according to the single tray cooking. In general, food in two trays are not cooked at the same time. So, take the tray that you observed that is cooked, from the oven, go on cooking for the other tray of food. As there will be heat transfer between two trays during the cooking of two trays of food, the cooking quality will be lower than the single tray. While cooking double trays, you can get a better cooking result by changing theplaces and ways of trays if needed. The processes that will be applied at the end of cooking, are same for all the functions.Open your ovens cover and leave it to cool after you put your trays in oven onto a safe place.
Turbo Fan and Lower heater Function
Turbo fan and lower heater function is an ideal function to cook pizza. The lower heater ensures the pizza paste to be cooked while Turbo fan spreads the heat of oven equally. Adjust the heat adjustment switch of your oven to the wished degree, also turn the function switch as it will show this functions sign and adjust the ovens time to the offered time for cooking and pre heat the oven for 10 minutes. This function is appropriate for cooking of one dish. At the end of cooking process, turn off the ovens switch and heat set up switch. Cancel the ovens time program and take the cooked food from oven and leave onto a safe place. Open your ovens door and leave it to cool. Do not come close to the oven until it cools and keep children away.
Warning: Max. set of thermostat 1900C
Grill and chicken Turning Function
This function is used to grill and to turn chicken, cooked food on a skewer. To make turning, use the turning skewer. To grill, place the food onto the grill, also the grill onto the shelf at toppest level. You can start to grill after placing the oven tray onto the 3rd Shelf. The tray that is placed onto the 3rd Shelf will ensure the collection of oils that drop from food.

Turn your ovens heat set up switch as it will show the sign of this function. Place your food into the oven after pre heating of 5 minutes. At the end of cooking, as in all other cooking processes; turn off the ovens switch and heat set up switch. Cancel the ovens time program and take the cooked food from oven and leave onto a safe place. Do not come close to the oven until it will cool and keep children away.
Warning: Max. set of thermostat 1900C
Upper heater, Grill and Roast Chicken Function
This function is used to grill rapidly and to roast chicken, cooked food on a skewer. To make roasting, use the roasting skewer. To grill, place the food onto the grill, also the grill onto the shelf at toppest level. You can start to grill after placing the oven tray onto the 3rd Shelf. The tray that is placed onto the 3rd Shelf will ensure collection of oils that drop from food. Turn your ovens heat set up switch as it will show the sign of this function. Place your food into the oven after pre heating of 5 minutes. At the end of cooking process, as in all other cooking processes; turn off the ovens switch and heat set up switch. Cancel the ovens time program and take the cooked food from oven and leave onto a safe place. Do not come close to the oven until it cools and keep children away.
Warning: Max. set of thermostat 1900C
Grill, Chicken Roasting and Fan Function
In this function, grill and upper heater and the fan that ensures to roast perfectly, operate together and cook. It is also used to grill, to roast chicken and cooked food on a skewer. To make roasting; use the roasting skewer. To grill, place the food onto the grill, also the grill onto the shelf at the toppest level. You can start to grill after placing the oven tray onto the 3rd Shelf. The tray that is placed onto the 3rd Shelf will ensure collection of oils that drop from food. Turn your ovens heat set up switch as it will show the sign of this function. Place your food into the oven after pre heating of 5 minutes. At the end of cooking process, as in all other cooking processes; turn off the ovens switch and heat set up switch. Cancel the ovens time program and take the cooked food from oven and leave onto a safe place. Do not come close to the oven until it cools and keep children away.
Warning: Max. set of thermostat 1900C

Lower Heater Function
At this cooking the best is spreaded from the lower heating element. Lower heating function is appropriate for heating the food instead of cooking.
Lower Heater and Fan Function
At this cooking, the heat is spreaded from the lower heating element and fan motor. This function can be used to heat the food equally in a short time.

Accessories Used in Oven

You can use glass dishes, cake molds, special oven trays that are appropriate for use in oven, that you are able to assure in market, apart from the oven trays and grill wire chicken roasting skewer that are given together with your oven. Pay attention to the information related to the subject that were given by the manufacturer firm. In case small size dishes are used, place the dish onto the grill wire, as it will completely be on the middle part of the wire. The following information must also be followed for the enameled dishes.
If the food that will be cooked does not cover the oven tray completely, if the food is taken from the deep freezer or the tray is being used for collection of foods juices that flow during grilling, the form changes can be observed in tray because of the high heat that occur during cooking or roasting.
The tray will return to its old form only when the tray cooled after cooking. This is a normal physical event that occurs during heat transfer.
Do not leave this tray or dish in cold environment right away after cooking in glass tray or dish. Do not put onto the cold and wet grounds. Place on a dry kitchen cloth or dish cross, ensure it to cools slowly. Otherwise the glass tray or dish may be broken. If you will grill in your oven; we recommend you to use the grill that was given in tray together with product. ( If your product includes this material ) So, the oils that spatter and flow, will not dirty the inside of oven. If you will use the big wire grill; put a tray onto one of the lower shelves for oils not to be collected. Also put some water into it for cleaning easiness.
Use 4th and 5th shelves while grilling and oil the grill for the ingredients that you will grill not to stick to the grill.

Use of rotisserie accessories
Pass the skewer through the chicken and lock the clamps, insert the tip of the skewer into the hole found at the rear panel of cavity and make sure that it completely leans on the frame and fits in motor shaft.To do this, first you have to turn the lid to the side, which is found infront of the skewer insertion hole, as shown in the figures. After that, fit the skewer onto the skewer grid (placed on the third rack) or skewer bracket (placed on the holes of tray).
Remove the handle from screwer, if it is installed and close the oven door.The handle must be attached only for removing the food after grilling.
Make sure that the oven is not operating while performing these operations.

PART 5 : CLEANING AND MAINTENANCE OF YOUR OVEN

CLEANING

Be sure that all control switches are off and your apparatus cooled before cleaning your oven. Plug off the apparatus. Control whether they are appropriate and recommended by the manufacturer before using the cleaning materials on your oven. As they may damage the surfaces, do not use caustic creams, abrasive cleaning powders, thick wire wool or hard tools. In case the liquids that overflows around your oven burn, the enameled place may be damaged. Immediately clean the overflew liquids.

Cleaning of Inside of Your Oven
Surely plug off the oven before starting cleaning.
The inside of enameled oven is cleaned in the best way when the oven is warm. Wipe the oven with a soft cloth that had been hemmed in soapy water after each use. Later wipe it with a wet cloth once more and then dry it. It may be required to use a liquid cleaning material from time to time and make a complete cleaning. Do not clean with dry and powder cleansers.

Cleaning of Your Ovens Cover
In order to be able to clean the cover of your oven from inside and outside, use a glass cleaner. Then rinse, dry it with a dry cloth. The cover can be pulled out for cleaning as shown in the following figure.

Open the cover completely.
Pass the metal pin through the holes as shown on picture
Do this process for both hinges.
Lift up the cover slightly, pull towards the outside smoothly. The cover will completely come out.
Again place it into hinge holes while pinning the cover to its place.
Do not clean the ovens cover while the glass panels are hot. In case this measurement is not taken, the glass panel may brake down. Contact to Authorized Service when any problem occured.

Cleaning Vitroceramic Cooker
Before starting cleaning wait for Vitroceramic cooker completely cool down. Be sure that cleaning material does not contain any particles which may cause to scratch glass.Use cream or liquid detergent. Vitroceramic surface must be cleaned with cold water and dried with soft cloth in a way that no cleaning material may be left. Use pallet provided with your product for cleaning food or residues. Sweet type food must be cleaned right after they are spilled before glass cools down. Steel cleaning material may damage Vitroceramic glass. Dust on the surface must be cleaned with wet cloth. Color change on ceramic surfaces does not effect functional structure and durability of Vitroceramic. Color change is caused by not cleaning the residues, erosion due to casseroles and using not appropriate cleaning materials and is not due to material change. Cleaning pallet must always be used before applying chemicals. With this pallet you can clean even the smallest dirt on the surface. Materials that are hard to clean like liquified plastic, oil and sweety materials can be cleaned with pallet easily. Your pallet is dangerous because it is equipped with razor therefore it must be kept away from chidren. Be careful not to scratch silicon adhesive placed on the edges of the glass while using pallet.

MAINTENENCE

Change of Oven Lamp
The change of oven lamp must be done by authorized technician. The rating the ampoule should be 230V, 25Watt, Type E14 before changing the lamp,the oven should be plugged off and it should be cool.

PART 6 : SERVICE AND TRANSPORT

Requirements Before Contacting to Service

If the oven does not operate;
The oven may be plugged off, there has been a blow-out. On models fitted with a timer, time may not be regulated.
If the oven does not heat; The heat may be not adjusted with ovens heater control switch.
If the interior lighting lamp does not light;
The electricity must be controlled.
It must be controlled whether the lamps are defective.
If they are defective, you can change them as following the guide.
Cooking ( if lower-upper part does not cook equally ) ;
Control the shelf locations, cooking period and heat values according to the manual.
Except these, if you still have any problem with your product, please call to the Authorized Service.

If you need any transport;
Keep the original case of product and carry it with its original case when needed to be carried. Follow the transport signs on case.
Tape the cooker on upper parts, hats and heads and saucepan carriers to the cooking panels.
Place a paper between the upper cover and cooking panel,cover the upper cover, then tape it to the side surfaces of oven.
Tape cardboard or paper onto the front cover on interior glass of oven as it will be suitable to the trays, for the wire grill and trays in your oven not to damage to the ovens cover during transport.
Also tape the ovens covers to the side walls.
If it does not have the original case;
Take measure for the external surfaces (glass and painted surfaces) of oven against possible blows.

HOOVER ( A &M (Middle East) FZCO)
P.O.Box 61254, Jebel Ali Freezone
Dubai, United Arab Emirates
Tel: +971 4 8861399

FVC66.01 S
FEC66.01 S

Techtronic Industries
TTi Middle East & Africa FZCO
P.o. Box 61254, Jebel Ali, Dubai
United Arab Emirates
Tel +971 4 8861399
Fax +971 4 8861400
www.ttigroup.com