SFL A10 Athlete Series Smart Watch User Manual

A10 Athlete Series Smart Watch
User Manual

Proper Wear and Kindly Reminder

1. Generally, wear at 1-2 finger width from wrist join. The sensor of the smartwatch should be close to the skin. Sensor for accurate heart rate monitoring result, it is not recommended to wear tightly and not shake. Otherwise, it will affect blood circulation.
2. With the functions of water-resistant, sweat-proof, and rain-proof, it can be used directly in daily washing, showering (cold water), and other daily environments.
3. Do not use it in the bath, sauna, hot spring, or other hot environments with hot water and steam, which will lead to product failure.
4. Owing to the action of water pressure, do not wear it while swimming or diving.

App Download and Supported System
Download and install the APP “FFit” by searching “fit” in “App store” on iPhones or in “Google Play” on Android phones, Or hand ring clock interface slide to find the two-dimensional code icon click to download the corresponding two-dimensional code.
Note: Mobile phones must support Android 4.4 or IOS 8.2 or above and Bluetooth 4.0 or above.

https://itunes.apple.com/app/id1466929052https://play.google.com/store/apps/details?id=com.zjw.ffit

Product Overview

Basic Operations

1. Power button: Press it to turn on/off the screen display. Hold it to turn on or off the watch.
2. Back button: Press it to go back to the previous interface.

Note: When the LED indicator is flashing, it means the watch is monitoring heart rate and blood pressure. Do not directly look at the blinking sensor light when detecting, which may cause eye irritation.
Charging watch

1. Attach the equipped magnetic charger to the metal contact on the back of the watch, and insert the other end of the charger into the USB wall charger or USB interface of a computer.

2. Charge under the following circumstances:
   Use at the first time; When the battery is low and power off automatically.

3. The screen is displayed in a charging state.
   Note: Do not directly look at the blinking sensor light when charging, which may cause eye irritation.

Smart Watch – Main Menu

Switch Interface On the clock interface, swipe left and right to switch the interfaces of main functions; Swipe up to easily switch the interfaces between secondary function and clock; Scroll down to switch to the Settings interface.
Introduction of Main functions

1. Heart Rate and Blood Pressure Monitor At the heart rate or blood pressure interface, the bracelet will automatically monitor your heart rate or blood pressure for about 30 seconds, and the sensor light will flash green during the detection. In addition, you can select my device on the “my” page of the application to open continuous heart rate monitoring, after which the bracelet will automatically start continuous monitoring of your heart rate and synchronize to the application.
   Note (1) although this product is used for real-time dynamic detection of heart rate, please keep your body inactive or still during the detection. Otherwise, the time of heart rate detection will be prolonged or the data cannot be measured. When you get the measurement data from the hand ring, you can check the real-time dynamic heart rate data. If there is a big difference in the measurement data, please take a break and measure again. The average value obtained after 5 consecutive measurements will be more accurate.
   (2) this product is a real-time dynamic heart rate measurement. The heart rate will be different in talking, drinking, eating, and other situations. When you are calm, the detection heart rate may be closer to your actual situation.
   (3) the measured data of heart rate and blood pressure are for reference only and cannot be used as the basis for medical-related aspects.

2. Sleep Monitor
   In this feature, you can see the total sleep time each night, time to fall asleep, time to get up, and so on. The sleep data detected by the bracelet will be synchronized with a manual drop-down refresh of the “health’ interface in the application.

Introduction of secondary functions

Clock main interface selection: find the setting icon in the time interface, click the theme selection to access its function, you can switch the main map, or in the case of connecting devices, click the “my” page in the APP, in the dial market to choose their favorite main map interface, a total of 21 optional.
Multi-motion mode: on the time interface, slide to the motion icon and click on the icon to access its function, slide up to browse 9 different ports, then select your favorite sport and click start.
Settings: find and click this icon to access its functions, which will display a list of related items, including theme selection, screen time, and system. The system interface can restart, restore factory Settings, check the device model, and shut down. If the application cannot search the bracelet, reset it.
Warm reminder: only when the connection with the “FFit” application is successful, can the date, time, step, message reminder, incoming call reminder, and other data of the bracelet be synchronized.
Binding
Tips for first pairing and connecting

1. Please ensure that the Bluetooth and GPS of your phone have turned on before access to the APP.

2. After opening the APP, please register an account and enter your personal information according to the prompt.
   (Note: in order to ensure the normal connection and use of the bracelet, please allow these requests for receiving information, making calls, etc., please make sure that your phone has agreed to “FFit” so that the APP can access the relevant programs.)

3. Please make sure the bracelet battery is fully charged and keep the bracelet close to the phone when connecting.

4. When the bracelet and APP are connected for the first time, the time, date, steps, calories, etc. of the bracelet will be synchronized to the phone. If the connection is disconnected for a long time, the time data will not be updated, and the APP needs to be bound again to update.

How to Connect: Mine — Connect a device — Select equipment model At this moment, there are two situations:
LOS system: A pairing request will appear, so you just click “Confirm” to connect.
Android phones: No pairing request, direct connection.

1. The binding is complete. Note: You need to blind your watch in this APP, not directly via the phone’s Bluetooth connection.
2. If it can’t search for the device model of the hand ring, please check whether the above tips are met or reset the watch.
   Note: Set the “about’ option of the system icon on the interface to see the watch device model.

Bluetooth Auto Reconnection

1. There is no reminder on the watch when out of the Bluetooth connection range. However, Bluetooth will automatically reconnect when the watch reaches the valid range of the Bluetooth connection.
2. If you close the background application, restart the phone, or disconnect the device in the APP, you need to enter the “FFit” APP to reconnect.

APP – Main Pages (Health – Data – Care – Mine )

Health Page

1. Tap the center banner to access the records of heart rate and blood pressure.
2. Slide the phone into this interface to refresh the data.
3. Click to GPS, and 3 seconds later you can enter the movement track. Click the icon in the upper right corner to exit the interface.

Data Page
 You can check motion data, sleep data, heart rate and blood pressure data, etc
Care page
Click the icon + to add friends who have registered with this application. You can add them by searching for their ID.
Mine page

1. Moving target: set a goal for each day.

2. Sleep target: Set your target sleep duration.

3. My device: you can choose to open or disable the wrist lift screen, call reminder, text message reminder, etc. Open the third-party Settings in more reminders, you can click to open the application message you want to receive, and you can also set the functions such as water reminder, sedentary reminder, meeting reminder, etc.
   Note: In more Settings, notifications for all applications are turned off by default, and if you want to receive messages or calls from this application, you need to turn on notifications for the corresponding application.

4. Shake Snapshot: Click on this item in the APP, the watch will display the camera icon, shake the watch, and take a photo with the hand behind the 3-second hand.

5. Find device: Click find device search watch, if the search is successful, the watch will vibrate.

6. Using help: You can see the instructions.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>