Goxmart Technology P1 Digital Frame User Manual
- June 5, 2024
- Goxmart Technology
Table of Contents
Goxmart Technology
P1 Digital Frame
Presence User manual
Type| Details| Descriptions
Product Form| Form Factor| Digital Photo Frame
Dimensions| TBD
Weight| TBD
LCD| Screen Size| 10.1 or 8inch
Screen Resolution| 800*1280 IPS (Portrait)
TP| Touch Module| N/A
System Hardware Configuration:
Type| Details| Descriptions
CPU| Type| Rock chip 3126C
Speed| 1.2GHZ
RAM| Capacity| 1GB(Built-in)
ROM| Capacity| 8GB (nand flash)
Camera| Front| N/A
Rear| N/A
Speaker| Built-in| N/A
Network Connections:
Type| Details| Descriptions
WIFI| 802.11b| Module
Light sensor| Light sensor| LTR-553ALS-WA
Ethernet Network| External Dongle| N/A
Interface Configuration:
Type| Details| Descriptions
Memory Card Slot| External Memory| N/A
SIM Card Slot| Data Storage| N/A
USB Interface| Support Data Transfer| USB-C type(for data transfer and power
supply)
Headphone Jack| Music Output| N/A
HDMI Interface| Video Output| N/A
Keyboard| Input Device| N/A
Main Accessories:
Type| Details| Descriptions
Power adapter| Standard Configuration| 5V 2A DC in
USB Cable| Standard Configuration| 1.2 meters long, white and black rhombus
Software Configuration:
Type| Details| Descriptions
Operating System| Android| Linux
Specification
Connect the power adaptor to the device, the device will auto on.
How To Set Up Your Account
| Plug in your Presence with the provided power adapter | Setup Guide |
|---|
Scan the QR Code
Create your account and download the Presence app
[email protected]
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.