CARSON 500402130 X10 Cage Buster 2.0 2.4 GHz Buggy Instruction Manual
- June 5, 2024
- Carson
Table of Contents
- CARSON 500402130 X10 Cage Buster 2.0 2.4 GHz Buggy Instruction Manual
- Dear Customer
- Limited Warranty
- The Warranty does not cover:
- Declaration of conformity
- SCOPE OF DELIVERY
- TECHNICAL DATA
- SAFETY PRECAUTIONS
- This model is not a toy!
- Pay attention to the charge level indication on your transmitter.
- SAFETY PRECAUTIONS LITHIUM BATTERIES
- 1. General
- 2. Warning notices
- 3. Charging instructions
- 4. Storage instructions
- 5. General terms of guarantee
- 6. Exclusion of liability
- 7.Disposal instructions
- CHASSIS
- REMOVING THE BODY
- CHARGE BATTERY PACK
- INSERTING THE DRIVE BATTERIES
- Advice
- YOUR TRANSMITTER
- Transmitter overview
- INSTALLING THE TRANSMITTER BATTERIES
- TURN ON THE RC SYSTEM
- BINDING
- HOW TO CONTROL YOUR MODEL
- TROUBLESHOOTING
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CARSON 500402130 X10 Cage Buster 2.0 2.4 GHz Buggy Instruction Manual
Dear Customer
We congratulate you for buying this CARSON product, which is designed and
manufactured using state of the art technology.
According to our policy of continued development and product improvement we
reserve the right to make changes in specifications regarding equipment,
material and design at any time without notice.
Specifications or designs of the actual product may vary from those shown in
this manual or on the box.
The manual forms part of this product. Should you ignore the operating and
safety instructions, the warranty will be void. Keep this guide for future
reference.
Limited Warranty
This product is warranted by CARSON against manufacturing defects in materials
and workmanship under normal use for 24 months from the date of purchase from
authorised franchisees and dealers. In the event of a product defect during
the warranty period, return the product along with your receipt as proof of
purchase to any CARSON store.
CARSON will, at its option, unless otherwise provided by law:
(a) Correct the defect by repairing the product without charging for parts and
labour;
(b) Replace the product with one of the same or similar design.
All replacement parts and products, and products on which a refund is made,
become the property of CARSON. New or reconditioned parts and products may be
used in the performance of warranty services.
Repaired or replaced parts and products are warranted for the
remainder of the original warranty period. You will be charged for repair or
replacement of the product made after the expiration of the warranty period.
The Warranty does not cover:
-
Damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance,
alteration, lightning or other incidence of excess voltage or current; -
Damage caused by losing control of your model;
-
Any repairs other than those provided by a CARSON authorised service facility;
-
Consumables such as fuses or batteries;
-
Cosmetic damage;
-
Transportation, shipping or insurance costs; or
-
Costs of product removal, installation, set-up service adjustment or reinstallation;
-
Any changes to plugs and cables, open the housing and damage the sticker.
This warranty gives you specific legal rights, and you may also have other rights which may vary according to the country of purchase.
Declaration of conformity
TAMIYA-CARSON Modellbau GmbH & Co. KG hereby declares that the radio equipment
type 500402130 conforms to Directive
2014/53/EU. The complete text for the EU declaration of conformity is
available at the following Internet address. www.carson-
modelsport.com/de/produkte.htm
The explanation of the symbol on the product, packaging or instructions:
Electronic devices are valuable products and should not be disposed of with
the household waste when they reach the end of their
service life! Help us to protect the environment and respect our resources by
delivering this appliance to the relevant recycling point.
We wish you a lots of fun using your CARSON product!
SCOPE OF DELIVERY
- RC model
- Remote Control
- Li -Ion battery 7.4 V
- 1.5V AA (LR06) transmitter batteries
- USB charger
- Manual
TECHNICAL DATA
- Model with 2.4 GHz RC system (max. transmitter power 10 mW)
- Transmitter operating voltage: 4.8-6 V
- Vehicle operating voltage: 7.4 V
- Function:
– Move forwards/backwards/brake
– Steering left/right
– Dual rate function: ride/steering
SAFETY PRECAUTIONS
Safety Instructions and Intended Use
This product is designed exclusively for hobby use and may only be used on
tracks and areas intended for this purpose. No persons or animals may be
transported with this model.
To avoid operator errors, it is mandatory that the user manual is read before
use!
These models may only be used with bodywork that is correctly fitted.
When removing the bodywork, please note that, during operation, certain parts
can become very hot.
Please note that various models can generate very high noise
levels and should, therefore, not be operated in your immediate proximity.
Please make sure, before every driving session, that the tank is correctly
closed or the power pack is correctly inserted.
To avoid faulty operation of the control system causing the modelto run out of
control, it must be checked that the transmitter and model batteries are in
good condition. It is essential to check that the model is correctly assembled
both before and after use; if need be, tighten nuts and bolts.
This model is not a toy!
- This product is not a toy, its operation must be learned step by step.
- Children under 14 years of age should operate the model only if supervised by an adult
- Operating RC models is a fascinating hobby that, however, must only be exercised with proper precautions and care. Since the weight of this model is considerable and it can reach a very high
speed it can, if it runs out of control, cause significant damage and injury for which you, as the operator, are liable. Only a correctly assembled model will work and react as expected.
Never improvise with unsuitable materials but, when the need arises, use only original spare parts. Even if the model is pre-assembled, all joints and fastenings should be checked for correct seating and tightness.
Before use, you must make sure of the following points:
- All rechargeable batteries must be fully charged.
- Before starting, check the radio range.
- Check that the model reacts correctly to the control signals.
- All functional parts of the product are in a faultless condition and have been checked.
- All screw fastenings are firmly seated.
- Do not drive under high-voltage power lines or radio masts or with nearby thunderstorms!
- Atmospheric interference can influence the operation of your model.
- The electrical parts of the model are not water-tight. Do not, therefore, drive it in rain or snow or through puddles or wet grass.
- The remote controlled model may be driven only on suitable areas and must not be used on the public highway.
- Do not use near people or animals!
- Do not use it when tired or if your reactions are otherwise impaired.
- Always maintain direct visual contact with your model.
- Regular maintenance and care are required for firt class driving performance.
- The model has parts that become hot in operation, e.g. the top of the motor, the metal gearbox, amongst many others. Touching these parts during operation can cause injury.
Pay attention to the charge level indication on your transmitter.
- With power packs or batteries that are half discharged, you can lose control of the model.
- In the transmitter, never mix fully charged batteries, rechargeable or not, with half discharged batteries or rechargeable batteries of different capacity.
- Never try to charge non-rechargeable batteries (dry cells), only batteries specified as rechargeable can be charged.
SAFETY PRECAUTIONS LITHIUM BATTERIES
1. General
Lithium batteries (accumulators) are energy storage devices with a high energy
density and can present risks. For this reason, particular care is needed when
charging, discharging, storing and handling. Read these instructions very
carefully before first using the battery. Do not fail to take note of the
warning notices and instructions for use.
Misuse can lead to risks such as explosion, overheating or fire.
Failure to observe the instructions for use leads to early failure and other
defects.
The instructions should therefore be kept in a safe place and it is essential
that they are handed over to the second user if the batteries are passed on.
2. Warning notices
- Avoid short-circuits. A short-circuit may well destroy the product. Cables and connections must be well insulated.
- It is essential when connecting the battery to ensure that the polarity is correct.
- Original plug connectors and cables may not be cut off or changed – if need be, use an adapter cable.
- Do not expose the battery to excessive heat or cold or to direct sunlight. Do not throw in the fire. Do not place the battery in contact with water or other liquids.
- Charge the battery only with charging units intended for the purpose and always use the balancer connection. It is only by using the balancer connection that optimum charging can be ensured. If this connection is not used, charging is subject to the risks mentioned above. Before charging, always first allow the battery to cool to ambient temperature. Never charge while hot.
- When charging, place the battery on a non-flammable, heatresistant support. There should be no flammable or readily ignited objects in the vicinity of the battery.
- During charging or operation, never leave the battery unsupervised.
- Do not fail to keep to the recommended charge/discharge current.
- The battery casing must not be damaged. It is essential to avoid damage by sharp objects such as knives or the like, from dropping, impact, bending etc. Damaged batteries may no longer be used.
- Batteries are not toys. They should be kept away from children.
3. Charging instructions
Lithium batteries are charged according to the CC-CV procedure.
CC stands for “constant current“, which is applied during the first
phase of charging. Once the battery reaches the maximum voltage configured in
the charger, it switches to CV (constant voltage) for the second phase of
charging. The battery voltage no longer increases.
The charging current now falls continuously until the battery is fully
charged. The maximum charging current for the battery is 1C (C=nominal
capacity of the battery, e.g. for a battery with a nominal capacity of 2700
mA, the maximum charging current for the battery is 2700 mA (2.7 A)). Never
charge several batteries together from a single charger. Differing states of
charge and capacities can lead to overcharging and destruction.
4. Storage instructions
Lithium batteries should be stored charged to 20-50 % of their capacity and at a temperature of 15-18 °C. If the cell voltage falls below 3 V, they should be recharged. Deep discharge and storage when discharged (call voltage <3 V) will render the battery unusable.
5. General terms of guarantee
There is a legal guarantee for production and material faults as applicable at
the time of dispatch. No liability is accepted for normal wear and tear. This
guarantee does not apply for defects attributable to improper use, inadequate
maintenance, third-party interference or mechanical damage. This applies, in
particular, to used batteries and batteries clearly showing signs of use.
Damage and loss of performance due to improper handling and/ or overload are
not product faults. Batteries are consumables and subject to a certain ageing.
This is influenced by factors such as the charge/discharge currents, the
charging procedure, the operating and storage temperatures and the state of
charge during storage.
The ageing shows itself in, among other things, an irreversible loss of
capacity. In the model field, where batteries are frequently used to supply
motors, very high currents can flow from time to time.
6. Exclusion of liability
Since we are unable to have any control over charge/discharge, handling,
compliance with assembly and operating instructions, battery replacement and
its care and maintenance, Tamiya /
Carson can accept no liability for loss, damage or costs incurred. Any claim
for damages that may result from operation, failure or faulty operation or
that is in any way related thereto will therefore be refused. We accept no
liability for personal injury or material damage and their consequences that
arise from our delivery.
7.Disposal instructions
Batteries are hazardous waste. Damaged or unusable cells must be disposed of
in the correct manner.
No liability for printing errors, we reserve the right to make changes!
CHASSIS
REMOVING THE BODY
CHARGE BATTERY PACK
INSERTING THE DRIVE BATTERIES
- Insert the batteries
- Put the battery plate on it and
- Fix it with the battery holder
Advice
-
Non-rechargeable batteries are not to be recharged.
-
Rechargeable batteries are to be removed from the toy before being charged.
-
Rechargeable batteries are only to be charged under adult supervision.
-
Batteries are to be inserted with the correct polarity.
-
Exhausted batteries are to be removed from the toy.
-
The supply terminals are not to be short-circuited.
-
Regular examination of transformer or battery charger for any damage to their cord, plug, enclosure and other parts.
YOUR TRANSMITTER
Transmitter overview
INSTALLING THE TRANSMITTER BATTERIES
- Open the battery compartment lid on the underside of the transmitter.
- Insert fully charged rechargeable batteries or new AA batteries observing the correct polarity. Close the cover on the battery compartment again. Ensure that the cover clicks properly into place. Check that it is in its correct position
TURN ON THE RC SYSTEM
CAUTION! Always turn the transmitter s power switch ON first! Please change batteries when LED status flashes on transmitter!!!
BINDING
Connecting transmitter and receiver:
The vehicle is ready to drive when it leaves the factory. In normal
circumstances, therefore, the binding function is not necessary!
The binding function should only be used if there are any connection problems
between the vehicle and the transmitter or if the transmitter/receiver is
replaced.
Switch on the receiver. The LED on the receiver then flashes rapidly!
Press and hold down the Binding button on the transmitter and then switch on the transmitter. The LED lights red.
The binding process is completed when the LED on the receiver is permanently and on the transmitter green illuminated.
HOW TO CONTROL YOUR MODEL
- Raise the tyres off the ground
- Turn the steering wheel to the right and left as far as it will go. The wheels are to follow the steering direction.
- If the wheels operate in the opposite direction, operate the servo Reverse switch (ST in position REV).
- To regulate the driving speed, actuate the throttle/brake
– backwards (forward driving, accelerating) or
– forwards (braking, reversing)
TROUBLESHOOTING
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>