TIMBURTEC TB30 True Wireless Earbuds User Guide
- June 5, 2024
- TIMBURTEC
Table of Contents
TIMBURTEC TB30 True Wireless Earbuds
Products and accessories
For the first time, remove the protective film of Figure 1 and put it into the charging case. After the charging case is closed, the earbuds are activated.
Case
-
First connection
After the earbuds is activated, open the charging case, and the earbud indicator is flashing green. At this time, turn on the Bluetooth switch of the mobile phone and click the device name Free S to connect. -
New device connection
Keep the earbuds in the charging case, and open the charging case. Press and hold the button in the charging case until the status light turns green, then release your hand. At this time, the earbuds light is flashing green. Turn on the Bluetooth switch of the mobile phone and click the device name Free S to connect. After the pairing record is available,open the case and the earbuds will automatically reconnect to the last connected mobile phone. -
Reset
Keep the earbuds in the charging case, and open the charging case.Press and hold the button in the charging case until the status light turns red, then release your hand. Wait until the earbuds light flashing green. The earbuds reset complete.
Earbud touch function
Tap eitherearbud to control them
Care and Maintenance
-
Please keep the device and its accessories in dry environment. Do not dry the device by using heating devices such as microwaves or hair dryer.
-
Do not place the device and its accessories in the area where temperature is too high or too low, or else it may cause malfunction, fire or explosion.
-
Before cleaning and maintenance, please stop using the device, stop all operations, and disconnect cables connecting with other devices.
-
Do not use strong chemicals products, detergents or cleaning equipment to clean the device its accessories. Please use a clean, dry, and soft cloth to wipe the device or its accessories.
-
Do not put magnetic stripe cards (such as bank cards, SIM cards, etc.) together with the device for a long time, because magnetic stripe cards may
be damaged by magnetic field. -
Do not disassemble or modify the device and its accessories, otherwise the warranty will not be applicable. If malfunction of the device happens, please contact the authorized service centers.
Safety and handing
-
Important safety information
Handle this device with care. They contain sensitive electronic components, including batteries;, and can be damaged or caue;e in,jury if dropped, burned, punctured, crushed, d1oasoembled, or if exposed to excessive heat or liquid, Don’t use damaged device, -
Electronic devices
Where there is a prohibition on the use of wireless devices, please do not use this device, otherwise it will interfere with other electronic devices or cause other hazards, -
Hearing protection
Listening to sound at high volumes may permanently damage your hearing. Background noise, as wall as continued exposure to high volume levels, can make sounds seem quieter than they actually are, Check the volume before inserting earbuds in your eaL -
Medical device interference
Earbuds and charging case contain components and radios that emit electromagnetic fields, Earbuds and charging case also contain magnets, These electromagnetic fields and magnets may interfere with pacemakers, defibrillators, or other medical devices, Ma1nta1n a safe distance of separation between your medical device and earbuds and charging case. Consult your physician and medical device manufacturer for information to your medical device. Stop using earbuds and charging case if you suspect they are interfering with your pacemaker, defibrillator, or any other medical device, -
Skin irritation
Earbuds can lead to ear infections 1f not properly cleaned. Clean
earbuds regularly with a soft lint-free cloth. Don’t gel moisture in any openings, or aerosol sprays, !’solvents, or abrasives. If a skin
problem develops, discontinue use. If the problem persist consult a physician. -
Electrostatic shock
When using earbuds in areas wl1ere the air is very dry, it is eae;y to build up static electricity and possible for your ears to receive a •mall electrostatic discharge from earbuds. To minimize the risk of electrostatic discharge, avoid using earbuds in extremely dry environments, or touch a grounded unpainted metal object before inserting earbuds. -
Traffic Safety
- Please comply with the relevant regulations of the country or region and do not use this product when driving.
- Keep in mind that driving safety 1s the most important thing and do not do anything that may cause distraction.
- The electronic devices of the car may malfunction due to the radio interference of the earbud. Please contact the manufacturer for detailed information.
- Wireless devices may interfere with the flight system of the aircraft, please comply with the relevant regulations of the airline, do not use the device when there is a prohibition using wireless equipment.
-
Operation Environment
- Do not use the device in wet environment or near magnetic f1ald to avoid internal circuit malfunction of the device.
- Please do not use the device in thunderstorm weather.
- Thunderstorms weather may cause malfunction of the device or a risk of electric shock.
- Please use the device within a temperature range of 0C-+40’C and store the device and accessories within a temperature range of -20″C-+60″C. Extremely higl1 or low temperatures may cause malfunction of the device. T11e performance of battery maybe in-Huenced when temperature is lower than 1 0C.
- Do not place the device in a position subject to direct sunlight, such as car dashboard or window sill.
- Do not expose the device to hot places or ignition sources, such as electric heater, microwaves, oven, water heaters, stove, candle or any other place that may generate heat.
- Do not place pins and other sharp metal items around the receivers or speakers, so as to avoid metal items being attached which may cause harm to you.
-
Accessories Requirements
Only accessories approved by the device manufacturer and compatible will1 the device can be used. The u,e of other type of accessories may violate the warranty provisions of the equipment and 1110 relevant provisions of the country 111 which the equipment and in place, and may lead to incidents. For approved accessories, please contact authorized service centers. -
Battery Safety
- Do not disassemble or modify the battery, insert foreign matter, or immerse the battery in water or other liquids, to avoid battery leakage, Overheating, fire or explosion.
- Do not drop, squeeze or puncture the battery, excessive external pressure on the battery may lead to short circuit and overheating inside the battery.
- This device is equipped with a built-in battery that is not removable. Do not replace the battery on your own to prevent causing damage to the battery or device. The battery can only be replaced in authorized service centers.
-
Care and Maintenance
- Please keep the device and its accessories in dry environment.
- Do not dry the device by using heating devices such as microwaves or hair dryer.
- Do not place the device and its accessories in the area where temperature is too high or too low, or else it may cause malfunction, fire or explosion.
- Before cleaning and maintenance, please stop using the device, stop all operations, and disconnect cables connecting with other devices.
- Do not use strong chemicals products, detergents or cleaning equipment to clean the device its accessories. Please use a clean, dry, and soft cloth to wipe the device or its accessories
- Do not put magnetic stripe cards (such as bank cards, SIM cards, etc.) together with the device for a long time, because magnetic stripe cards may be damaged by magnetic field.
- Do not disassemble or modify the device and its accessories, otherwise the warranty will not be applicable. If malfunction of the device happens, please contact the authorized service centers.
-
Environmental Protection
- Please do not throw away the device and its accessories as ordinary domestic waste.
- Please comply with the local regulations for handling the device and its accessories and support recycling campaigns.
WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.
FCC
Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference ina residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.The
device can be used in portable exposure condition without restriction.
After-sales Service
Dear user, thank you for using this product. In case of any damage that is not
due to human factor, warranty service is available fora period of one year
beginning from the original purchase date.
To protect your legal interests, please read the following notes carefully:
- A valid purchase certificate shall be issued by the sales unit at the time of purchase.
- Consumers should retain their warranty card. The warranty card will not be re-issued if lost.
- In case of any damage of the product that is not due to human factors,consumers are entitled to repairs at customer service centers with warranty card and purchase certificate free of charge within the warranty period.
The warranty is not applicable in the following cases that arise during product usage
- Exceeds the valid warranty period;
- The product is damaged because it was accidentally dropped or immersed in water when in use.
- Damages caused by human factors such as unauthorized disassembly, modification, etc.
- Damages caused by usage in environments not conforming to product specifications.
- Damages caused by force majeure (e.g. fires, earthquakes, and lightning).
- Damages caused by improper usage that does not conform to the user guide or operation manual.
- Information on Warranty Card or Purchase Certificate is inconsistent with the product serial number or altered.
- SN code of the product is missing, damaged, or blurred beyond recognition
Declaration of RoHS Compliance
This stable is compiled according to SJ/T 11364 standard.
- O Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.
- X Indicates that said hazardous substance contained in at least one of the homogeneous materials for this part is above the limit requirement of GB/T 26572, but it is exempted by EU ROHS.
Please understand that there is not always bundled all of the items because it depends on a product.
TAUCVEE Warranty Card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>