ELIXAGE UV10W Wireless Charger with UV-C Sanitizer User Manual

ELIXAGE UV10W Wireless Charger with UV-C Sanitizer User Manual

Product overview

Installation And Usage Instructions

1. 

2. 
   NOTE: UV sanitizer and wireless charging will both function with most cell phone cases. Insert phone as shown with screen side up. Wireless charging will function with the chamber cover open.

3. UV sanitizing will begin automatically when the chamber cover is closed. For an additional 5 minutes of UV sanitizing, press the UV Chamber Activation Button. UV sanitizing will shut off automatically after 5 minutes or if the chamber cover is opened. If the chamber is empty when the chamber cover is closed, a 5 minute cleaning cycle will run automatically.
   

NOTE: LED might flash red to indicate foreign object detection for metal objects; however, it is safe to use the UV sanitizer for most common household items.

Please check that the Product features, connectors and voltage will be compatible with your devices in accordance to your devices’ manuals. Please read this manual and its instructions carefully before use. We are not responsible for any damage caused by incorrect or reckless operation.

Important Safety Information

These safety guidelines are to help operate the  Product safely, to ensure your personal safety and to reduce the risk of fire, electric shock or injury.

PRECAUTIONARY STATEMENT

UV-C light is damaging to humans and animals.

• Do not store or use the Product in high-temperature environments, including heat caused by direct sunlight or other intense forms of heat.
• Do not disassemble the Product. (It may cause fire or electric shock.)
• Do not attempt to repair or replace any part of this Product.
• Do not connect a bound cord to the power supply.
• Do not place the cord or device near heating elements.
• If there is any strange sound, smoke or odor, disconnect power cable immediately.
• Do not put any sharp objects into the venting holes of the Product. (It may cause fire or electric shock.)
• Avoid placing credit cards in chamber as magnetic strip might get damaged by wireless charging feature.
• UV light may discolor white or lightly pigmented plastics with continuous, prolonged exposure.
• Ensure power cable is firmly plugged in.
• Do not use a damaged charging cable. (It may cause fire or electric shock.)
• Do not place the Product on a bed, bag or inside a closet that does not have good ventilation.
• Always wipe off the Product with a dry soft fabric. Do not use liquids. (Liquids may cause electric shock.)
• Ensure the power plug and the power outlet are clean. (Dirt or dust may cause a short circuit and fire.)
• Keep the Product out of reach of children.
• Do not unplug the power cord with a wet hand. (It may cause electric shock.)
• Unplug the power cord if you don’t use the Product for a long time. (It may cause heat, fire and electric shock.)

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference, and
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC ID: UQ3UV1OW

160354A851 Rev. A

Limited Lifetime Warranty

This product is warranted to be free from defects in materials and workmanship. This limited warranty does not cover damages caused by accident, misuse, modification or normal wear and tear.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>