Fjorden 2A7AN FG FASTER CAMERA Grip User Manual
- June 5, 2024
- Fjorden
Table of Contents
Fjorden 2A7AN FG FASTER CAMERA Grip
IN THE BOX
FJORDEN GRIP OVERVIEW
- Two-Stage Shutter Button
- Customisable Control Dial
- Multi-Function Button
- Zoom Lever
- Quick-Release Button
- Mounting mechanism
- OR Code & Serial Number
- Status LED
PAIRING THE FJORDEN GRIP
- First, download and install the Fjorden Camera app app.fiorden.co
- Then start the pairing process by tapping “Pair My Grip” from the onboarding screen or by accessing Grip Settings () from the app’s main view.
- Pull out the paper tab sticking out of the battery tray from the bottom of your new Fjorden Grip. After you remove the paper tab, press gently on the battery tray to make sure it stays flush with the grip.
- Press & hold the Shutter Button& Function Button on the Fjorden Grip, until the Status LED starts blinking. The name of your Fjorden Grip should show up in the app.
- Tap on the button once your Fjorden Grip appears on the Pairing screen. Your Grip should now be paired with the Fjorden Camera app!
MOUNTING THE FJORDEN GRIP
Use eithera Fjorden MagSafe Case [A] or the included Universal Adapter [B) to mount the Grip on your iPhone. If you don’t have a Fjorden MagSafe case, use the included Adapter Plate:
- Make sure the surface is thoroughly clean and dry before applying the adapter plate.
- Peel off the protective cover from the adapter
- Stick it on the lower half of your iPhone or existing case.
Attach the Fjorden Grip to the Case or Adapter Plate. Press the Quick-Release Button and push the Grip until it securely clicks into place.
USING THE FJORDEN GRIP
TAKE A PHOTO
Half-press the Shutter Button to lock focus on a subject. Full-press the
Shutter Button completely to capture a photo. Change the position of the focus
point by tapping anywhere on the Viewfinder.
ADJUST EXPOSURE
Rotate the Control Dial left or right to adjust the value of a parameter. The
currently selected parameter is indicated by the yellow dial. Press the
Control Dial to toggle between adjustable parameters (Exposure Compensation,
Shutter Speed, IS0 or White Balance)
ZOOM IN & OUT
Pull the Zoom Lever slowly to the right to zoom in. Push the Zoom Lever slowly
to the left to zoom out. Flick the Zoom Lever to quickly switch between your
iPhone’s lenses. Press the Function Button to switch to the front facing
camera.
CUSTOMISE THE FJORDEN GRIP
You can customise the functionality of the Control Dial and Function Button
from the Grip Settings inside Fjorden Camera. Tap on the Grip icon in Fjorden
Camera and go to “Control Dial Options” to change the list of parameters
adjustable with the Control Dial. Go to “Function Button Options” to change
what the Function Button does.
Contact
www.fjorden.co
support@fjorden.co
If you find our product satisfactory, please encourage us by sharing your user experience online. If you need help with this purchase, please do not hesitate to contact us. Read more at http://support.fjorden.co
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1] This device may not cause harmful
interference. [2] This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure
The equipment has been evaluated to meet general RF exposure requirement. The
device can be used in portable condition without restriction.
IC Notice:
This device complies with Canada Industry licence-exempt RSS standard[s).
Operation is subject to the following two conditions:
- this device may not cause interference; and
- this device must accept any interference. Including interference that may cause undesired operation of the device.
CAN ICES-3 (B]
RF Exposure Statement
This product complies with the FCC and IC RF exposure limit set forth for an
uncontrolled environment and is safe for intended operation as described in
this manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>