Teleheer T6 Plus Motorcycle Helmet Waterproof Bluetooth Headset or Intercom User Manual

Teleheer T6 Plus Motorcycle Helmet Waterproof Bluetooth Headset or

Intercom

Illustrations of Product Buttons and Functions

On/Off

• Switch on: Press and hold the Power button for 3 seconds. The blue indicator light is on for 1 second, with the voice prompt “switched on”
• Switch off: Press and hold the Power button for 3 seconds. The red indicator light is on for 1 second, with the voice prompt “switched off”.

Intercom Signal Pairing and Disconnecting

1. Intercom signal paring when the device is switched off: press and hold the Power] button for 6 seconds; the paring starts while the red and blue indicator lights flash alternately. At this time, short press the Power button on one of the headsets for signal search, and you will hear a sound prompt of “Tok tok tok”; when paired successfully, the blue indicator light flashes once every 6 seconds and you will hear voice prompt “Intercom connected. You can start talking now”.
2. Intercom disconnecting: when the headset is on and the intercom is connected successfully, short press the Power button, there will be a voice prompt “intercom disconnected” and the blue indicator light flashes 2 times every 6 seconds.
3. Switch on and reconnect two paired headsets: press and hold the Power button for 3 seconds, then release the button when the blue light is on; you will hear the voice prompt “switched on + battery status press the Power button again to reconnect the two devices, until you hear the voice prompt “intercom connected.

Operation of signal pairing with other brands of devices

1. Signal pairing as host with devices of other brands: press and hold the Power button for 6 seconds until the red and blue indicator lights flash, and press the Call] button for success paring, during which process the Bluetooth can be used as normal.
2. Signal paring as a secondary machine with the device of other brands: press and hold the Power button for 6 seconds until the red and blue indicator lights flash; turn off the devices of other brands before turning on again, then the signal pairing will be done automatically, during which process the Bluetooth cannot be used as normal.

Notes

1. The signal search cannot be performed when the intercom is connected. Please disconnect the intercom before connecting with other Bluetooth devices.
2. For Bluetooth connecting, switch on the device until the red and blue lights both flash.
3. If Bluetooth intercom signal pairing is not successful, the headset will automatically switch off after 30 minutes.
4. When the device is switched on, press and hold the Call button for intercom pairing. It’s possible that the connection might be a failure. If that happens, please switch off the headset and try again.

Intercom Pairing Record Removal

After switching on the device, press the power button for 3 seconds to enter the clear command, the prompt tone is “beep beep”, and the red indicator light flashes 3 times quickly, that is, the pairing is cleared. After clearing the pairing information, it will automatically shut down.

Bluetooth Connection

1. When switched on: Disconnect the intercom and press the Call button for 5 seconds, the red and blue indicator lights will flash alternately. When the Bluetooth signal shows up in Bluetooth Setting, click “Connect.
2. When switched off: Press and hold the Power button for 6 seconds, the red and blue indicator lights will flash alternately. When the Bluetooth signal shows up in Bluetooth Seting, click “Connect”.
3. Note: The Bluetooth signal is only available for search when the red and blue indicator lights flash alternately.

Answer/Hang up Phone Calls

1. Use Bluetooth intercom to answer mobile phone calls: when the device is successfully paired via Bluetooth with a mobile phone, the phone calls will be answered on the intercom automatically after the mobile phone rings for 8 seconds.
2. Hang up/Answer phone calls: single-click the Call button
3. Reconnect the intercom after hanging up: users can answer phone calls when the intercom is connected.

Language Switch

1. When the device is switched off, press and hold the Power button for 6 seconds until the red and blue indicator lights both flash; press and hold the Call button for two seconds to switch the language.
2. When the device is switched on. Press and hold the Call button until the red and blue indicator lights both flash; press and hold the Call button for two seconds to switch the language.

Details of Functions and Operation Instructions

Product Parameters

Voice prompts and indicators

Brand and factory information

FCC STATEMENT

This device complies with part 15 of the FcC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including inteference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device

• The device has been evaluated to meet the general RF exposure requirements.
• The device can be used in portable exposure conditions without restriction.

IC Caution

RSS-Gen Issue 3 December 2010″&”CNR-Gen 3e éditionDécembre 2010

• This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference,
2. This device must accept any interference, including interference that may cause undesired operation of the device.

CE Caution

“Intercom Headset declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

• Importers: Shenzhen Hongfu Intelligent Technology Co., Ltd
• Address: Room 312, Henglu E-times Building, No.159. Pingji Avenue North, Hehua Community, Pinghu Sub-district, Longgang District, Shenzhen
• For the full RED DoC file, Please download it as follow web: http://teleheer.com
• Operation frequency: 2402-2480MHz,
• Max output: 7.15dBm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>